Re: [RFC][PATCH 2/2] drm_hwcomposer: Fall back to client compositon if the gl precompostior fails

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Apr 24, 2018 at 2:38 PM John Stultz <john.stultz@xxxxxxxxxx> wrote:

> On Tue, Apr 24, 2018 at 3:34 AM, Stefan Schake <stschake@xxxxxxxxx> wrote:
> > On Tue, Apr 24, 2018 at 10:09 AM, Alexandru-Cosmin Gheorghe
> > <Alexandru-Cosmin.Gheorghe@xxxxxxx> wrote:
> >> On Mon, Apr 23, 2018 at 05:06:44PM -0700, John Stultz wrote:
> >>> @@ -695,6 +704,15 @@ HWC2::Error
DrmHwcTwo::HwcDisplay::ValidateDisplay(uint32_t *num_types,
> >>>          layer.set_validated_type(HWC2::Composition::Client);
> >>>          ++*num_types;
> >>>          break;
> >>> +      case HWC2::Composition::Device:
> >>> +        if (!compositor_.uses_GL() && !avail_planes) {
> >>
> >> Something is not entirely correct here, you can't assume just because
> >> you have planes available they can be used.
> >> E.g Layer has rotation, but the plane doesn't support it.
> >> This part is handled by the planning part in presentDisplay which
> >> falls back on GPU.

> Ah. Thanks for the correction here!

> This is part of the disconnect I have been having with the
> drm_hwcomposer logic. The plan/validate step doesn't really do either,
> instead it defers all the checking/planning to the set/present step.
> But unfortunately it seems if we want to use the surfaceflinger gl
> composer, we need to mark the layers as client rendered in the
> validate function.

> >> I think the easiest and safe way is to just fallback to
> >> Composition::Client whenever the GLCompositor failed to initialize.
> >>
> >
> > I agree, this would only work out for the single plane case where you
end
> > up using client composition for everything.

> True, but maybe as a first step we simply fall back on the
> glcompositor, just so we have something displaying in that case (right
> now nothing gets displayed).

> > In the spirit of DRM what we would probably want is to atomic test a
> > composition, and if that fails we can still fallback to client or GL
> > compositor depending on its availability. And then in a far far away
> > future we might even do a few iterations simplifying our composition
until
> > it atomic tests correctly so we can still offload some "simple" parts
> > like the cursor.

> This sounds reasonable. I suspect it will take some heavier rework of
> the drm_hwcomposer to move such logic to the validate step.

> Marissa/Sean: Any objections here? Doing more planning in the validate
> step sounds like it aligns closer to the HWC2 interface goals, but I
> don't want to have to relearn-the-hard-way any lessons that resulted
> in the current mode of accept it all and sort it in present.


No objections, this needs to be done. As you mentioned, this is going to
require a good amount of code movement. I think what we're seeing here as
well, as with the writeback series, are growing pains. When this was
written, it was for HWC1 and the GLCompositor was the only alternate
compositor. Now that we're on HWC2 and discussing using writeback,
SurfaceFlinger, and possibly GLCompositor, we need something more robust.

Sean

> In the meantime I'll drop the flawed plane/layer allocation from this
> patch and resend.

> thanks
> -john
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux