Hi,
On Tue, Apr 24, 2018 at 7:31 AM, Ezequiel Garcia
<ezequiel@xxxxxxxxxxxxxxxxxxxx> wrote:
> Hi Doug, Sean:
>
> I would like to move this forward.
>
> On 26 February 2018 at 15:23, Doug Anderson <dianders@xxxxxxxxxxxx> wrote:
>> Hi,
>>
>> On Thu, Feb 8, 2018 at 9:48 AM, Sean Paul <seanpaul@xxxxxxxxxxxx> wrote:
>>> This patch adds an override mode for kevin devices. The mode increases
>>> both back porches to allow a pixel clock of 26666kHz as opposed to the
>>> 'typical' value of 252750kHz. This is needed to avoid interference with
>>> the touch digitizer on these laptops.
>>>
>>> Changes in v2:
>>> - Wrap the timing in display-timings node to match binding (Rob/Thierry)
>>> Changes in v3:
>>> - Unwrap the timing from display-timings and rename panel-timing (Rob)
>>>
>>> Cc: Doug Anderson <dianders@xxxxxxxxxxxx>
>>> Cc: Eric Anholt <eric@xxxxxxxxxx>
>>> Cc: Heiko Stuebner <heiko@xxxxxxxxx>
>>> Cc: Jeffy Chen <jeffy.chen@xxxxxxxxxxxxxx>
>>> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
>>> Cc: Stéphane Marchesin <marcheu@xxxxxxxxxxxx>
>>> Cc: Thierry Reding <thierry.reding@xxxxxxxxx>
>>> Cc: devicetree@xxxxxxxxxxxxxxx
>>> Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
>>> Cc: linux-rockchip@xxxxxxxxxxxxxxxxxxx
>>> Signed-off-by: Sean Paul <seanpaul@xxxxxxxxxxxx>
>>> ---
>>> arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts | 14 ++++++++++++++
>>> 1 file changed, 14 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
>>> index 191a6bcb1704..658411ce37ea 100644
>>> --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
>>> +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
>>> @@ -98,6 +98,20 @@
>>> backlight = <&backlight>;
>>> power-supply = <&pp3300_disp>;
>>>
>>> + panel-timing {
>>> + clock-frequency = <266604720>;
>>> + hactive = <2400>;
>>> + hfront-porch = <48>;
>>> + hback-porch = <84>;
>>> + hsync-len = <32>;
>>> + hsync-active = <0>;
>>> + vactive = <1600>;
>>> + vfront-porch = <3>;
>>> + vback-porch = <120>;
>>> + vsync-len = <10>;
>>> + vsync-active = <0>;
>>> + };
>>> +
>>> ports {
>>> panel_in_edp: endpoint {
>>> remote-endpoint = <&edp_out_panel>;
>>
>> Kristian brought an old bug to my attention
>> <https://bugs.chromium.org/p/chromium/issues/detail?id=750354> and it
>> made me think. Should we somehow adjust the bindings here to account
>> for the fact that a board may source several different panels?
>>
>> AKA: on some boards an ODM may want to second source (or third source,
>> or ...) the panel. They'll randomly connect several different panels
>> to the board and ship the boards out. The panels are all compatible
>> electrically (same power sequencing) but might need slightly different
>> timings. In this particular case there's no board-level strappings
>> for the different panels--it's assumed that the EDID on the panels can
>> be used to distinguish them.
>>
>> In that case it seems like it would be nice to allow specifying more
>> than one "panel-timing" nodes. Maybe keyed off some type of ID that's
>> present in the EDID?
>>
>>
>> Is that something we'd want to account for before we land this series?
>> It seems like it would just be adding an extra level of nodes?
>>
>
> AFAICS, there is no EDID without a DDC bus, which we don't
> seem to have on gru platforms, do we?
I'm fairly certain we can read the EDID on gru devices. I see the
"aux" channel connected on the schematics. That'll do it, right?
...and I could have sworn that at some point in time I could read the
EDID in the software. My kevin devices are not connected for
debugging so I can't check right now, but I'm pretty sure I was able
to read the EDID in the past...
-Doug
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
