Hi Andrzej,
This is the rebased version of v6 series. This patchset includes cleanups,
improvements, and bug fixes for Rockchip DRM driver and PSR support.
This version is a RESEND of v6 with few changes. The following two
patches are not included and will be send in a separate patchset for
further discussion.
- [PATCH v6 24/30] drm/rockchip: Disable PSR on input events
- [PATCH v6 25/30] drm/rockchip: Cancel PSR enable work before changing
the state
The following patch was remove as is not needed.
- [PATCH v6 28/30] drm/rockchip: Disable PSR from reboot notifier
I think that the other patches have the required tags and are ready to
be merged.
Regards,
Enric
Changes in v6:
- Removed the following patches as are already applied.
[PATCH v5 01/36] drm/bridge: analogix_dp: detect Sink PSR state after
configuring the PSR
[PATCH v5 02/36] drm/rockchip: Remove analogix psr worker
[PATCH v5 03/36] drm/bridge: analogix_dp: Don't change psr while
bridge is disabled
- Explain in the commit message why we need to increase
the delay in the timeout loop in
[PATCH v5 07/36] drm/bridge: analogix_dp: Move enable video into
config_video()
- Add Reviewed-by: Archit Taneja <architt@xxxxxxxxxxxxxx> for the
drm/bridge parts
- Add Reviewed-by: Heiko Stuebner <heiko@xxxxxxxxx> for
[PATCH v5 19/36] drm/rockchip: Restore psr->state when enable/disable
psr failed
Changes in v5:
- Removed the following patches as are already applied.
[PATCH v4 01/38] drm/bridge: analogix_dp: set psr activate/deactivate
when enable/disable bridge
[PATCH v4 02/38] drm/rockchip: Don't use atomic constructs for psr
- Add Mareks tested-tag and including the missing people.
- [PATCH v4 15/38] move analogix_dp_set_analog_power_down() before
phy_power_off() to fix Exynos issue.
Changes in v4:
- Rebased all on top of drm-misc-next
- Removed the following patches as are already applied.
[PATCH v3 01/43] drm/rockchip: Get rid of unnecessary struct fields
[PATCH v3 02/43] drm/rockchip: support prime import sg table
[PATCH v3 03/43] drm/rockchip: Respect page offset for PRIME mmap
calls
- Removed the following patches as now are part of another patchset
[PATCH v3 05/43] drm/bridge: analogix_dp: Don't power bridge in
analogix_dp_bind
[PATCH v3 33/43] drm/panel: simple: Change mode for Sharp lq123p1jx31
Changes in v3:
- Addressed some of the comments from Sean on the v2
Changes in v2:
- A few patches have been replaced by newer and cleaner versions from
the ChromeOS kernel gerrit, especially about disallowing PSR for the
whole atomic commit.
Douglas Anderson (4):
drm/bridge: analogix_dp: Reorder plat_data->power_off to happen sooner
drm/bridge: analogix_dp: Properly log AUX CH errors
drm/bridge: analogix_dp: Properly disable aux chan retries on rockchip
drm/bridge: analogix_dp: Split the platform-specific poweron in two
parts
Lin Huang (6):
drm/bridge: analogix_dp: Move enable video into config_video()
drm/bridge: analogix_dp: Check AUX_EN status when doing AUX transfer
drm/bridge: analogix_dp: Ensure edp is disabled when shutting down the
panel
drm/bridge: analogix_dp: Extend hpd check time to 100ms
drm/bridge: analogix_dp: Check dpcd write/read status
drm/bridge: analogix_dp: Reset aux channel if an error occurred
Mark Yao (1):
drm/rockchip: pre dither down when output bpc is 8bit
Tomasz Figa (5):
drm/rockchip: analogix_dp: Do not call Analogix code before bind
drm/rockchip: psr: Avoid redundant calls to .set() callback
drm/rockchip: psr: Sanitize semantics of allow/inhibit API
drm/rockchip: Disallow PSR for the whole atomic commit
drm/rockchip: psr: Remove flush by CRTC
zain wang (11):
drm/bridge: analogix_dp: Don't use fast link training when panel just
powered up
drm/bridge: analogix_dp: Retry bridge enable when it failed
drm/bridge: analogix_dp: Wait for HPD signal before configuring link
drm/bridge: analogix_dp: Set PD_INC_BG first when powering up edp phy
drm/bridge: analogix_dp: Fix incorrect usage of enhanced mode
drm/bridge: analogix_dp: Fix AUX_PD bit for Rockchip
drm/rockchip: Restore psr->state when enable/disable psr failed
drm/bridge: analogix_dp: Don't use ANALOGIX_DP_PLL_CTL to control pll
drm/bridge: analogix_dp: Fix timeout of video streamclk config
drm/bridge: analogix_dp: Fix incorrect operations with register
ANALOGIX_DP_FUNC_EN_1
drm/bridge: analogix_dp: Move fast link training detect to set_bridge
.../drm/bridge/analogix/analogix_dp_core.c | 331 +++++++++++++-----
.../drm/bridge/analogix/analogix_dp_core.h | 5 +-
.../gpu/drm/bridge/analogix/analogix_dp_reg.c | 236 +++++++------
.../gpu/drm/bridge/analogix/analogix_dp_reg.h | 7 +
drivers/gpu/drm/exynos/exynos_dp.c | 2 +-
.../gpu/drm/rockchip/analogix_dp-rockchip.c | 37 +-
drivers/gpu/drm/rockchip/rockchip_drm_drv.h | 1 +
drivers/gpu/drm/rockchip/rockchip_drm_fb.c | 61 +++-
drivers/gpu/drm/rockchip/rockchip_drm_psr.c | 158 ++++-----
drivers/gpu/drm/rockchip/rockchip_drm_psr.h | 7 +-
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 13 +-
drivers/gpu/drm/rockchip/rockchip_drm_vop.h | 1 +
drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 1 +
include/drm/bridge/analogix_dp.h | 3 +-
14 files changed, 559 insertions(+), 304 deletions(-)
--
2.17.0
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
