The PiTFT (ili9340) has a hardware reset circuit that resets only
on power-on and not on each reboot through a gpio like the
rpi-display does. As a result, we need to always apply the
rotation value regardless of the display "on/off" state.
Moved the rotation setting code below out_enable:.
Signed-off-by: Tom Callaway <tcallawa@xxxxxxxxxx>
---
drivers/gpu/drm/tinydrm/mi0283qt.c | 41 +++++++++++++++++++++-----------------
1 file changed, 23 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/tinydrm/mi0283qt.c b/drivers/gpu/drm/tinydrm/mi0283qt.c
index 4e6d2ee94e55..2bb9e3ce4823 100644
--- a/drivers/gpu/drm/tinydrm/mi0283qt.c
+++ b/drivers/gpu/drm/tinydrm/mi0283qt.c
@@ -84,24 +84,6 @@ static void mi0283qt_enable(struct drm_simple_display_pipe *pipe,
/* Memory Access Control */
mipi_dbi_command(mipi, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT);
- switch (mipi->rotation) {
- default:
- addr_mode = ILI9341_MADCTL_MV | ILI9341_MADCTL_MY |
- ILI9341_MADCTL_MX;
- break;
- case 90:
- addr_mode = ILI9341_MADCTL_MY;
- break;
- case 180:
- addr_mode = ILI9341_MADCTL_MV;
- break;
- case 270:
- addr_mode = ILI9341_MADCTL_MX;
- break;
- }
- addr_mode |= ILI9341_MADCTL_BGR;
- mipi_dbi_command(mipi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode);
-
/* Frame Rate */
mipi_dbi_command(mipi, ILI9341_FRMCTR1, 0x00, 0x1b);
@@ -127,6 +109,29 @@ static void mi0283qt_enable(struct drm_simple_display_pipe *pipe,
msleep(100);
out_enable:
+ /* The PiTFT (ili9340) has a hardware reset circuit that
+ * resets only on power-on and not on each reboot through
+ * a gpio like the rpi-display does.
+ * As a result, we need to always apply the rotation value
+ * regardless of the display "on/off" state.
+ */
+ switch (mipi->rotation) {
+ default:
+ addr_mode = ILI9341_MADCTL_MV | ILI9341_MADCTL_MY |
+ ILI9341_MADCTL_MX;
+ break;
+ case 90:
+ addr_mode = ILI9341_MADCTL_MY;
+ break;
+ case 180:
+ addr_mode = ILI9341_MADCTL_MV;
+ break;
+ case 270:
+ addr_mode = ILI9341_MADCTL_MX;
+ break;
+ }
+ addr_mode |= ILI9341_MADCTL_BGR;
+ mipi_dbi_command(mipi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode);
mipi_dbi_enable_flush(mipi, crtc_state, plane_state);
}
--
2.14.3
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
