The backlight 1st update was in the otm8009a_prepare() function
for a bad reason: backlight was not working in video mode and the
otm8009a_prepare() is in command mode for the init sequence. As the
backlight is now fixed (no lpm), it is good to put it back in the
otm8009a_enable() function, avoiding also image glitches visible
on some "slow" devices.
Signed-off-by: Philippe Cornu <philippe.cornu@xxxxxx>
---
drivers/gpu/drm/panel/panel-orisetech-otm8009a.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
index 0fd2e0144d2b..de4a16d5275c 100644
--- a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
+++ b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
@@ -330,13 +330,6 @@ static int otm8009a_prepare(struct drm_panel *panel)
ctx->prepared = true;
- /*
- * Power on the backlight. Note: end-user still controls brightness
- * Note: ctx->prepared must be true before updating the backlight.
- */
- ctx->bl_dev->props.power = FB_BLANK_UNBLANK;
- backlight_update_status(ctx->bl_dev);
-
return 0;
}
@@ -344,6 +337,16 @@ static int otm8009a_enable(struct drm_panel *panel)
{
struct otm8009a *ctx = panel_to_otm8009a(panel);
+ if (ctx->enabled)
+ return 0;
+
+ /*
+ * Power on the backlight. Note: end-user still controls brightness
+ * Note: ctx->prepared must be true before updating the backlight.
+ */
+ ctx->bl_dev->props.power = FB_BLANK_UNBLANK;
+ backlight_update_status(ctx->bl_dev);
+
ctx->enabled = true;
return 0;
--
2.15.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
