Re: [PATCH 3/8] drm: bridge: thc63lvd1024: Add support for LVDS mode map

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Peter,

On Sun, Apr 22, 2018 at 10:02:51PM +0200, Peter Rosin wrote:
> On 2018-04-19 11:31, Jacopo Mondi wrote:
> > The THC63LVD1024 LVDS to RGB bridge supports two different LVDS mapping
> > modes, selectable by means of an external pin.
> >
> > Add support for configurable LVDS input mapping modes, using the newly
> > introduced support for bridge input image formats.
> >
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> > ---
> >  drivers/gpu/drm/bridge/thc63lvd1024.c | 41 +++++++++++++++++++++++++++++++++++
> >  1 file changed, 41 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/bridge/thc63lvd1024.c b/drivers/gpu/drm/bridge/thc63lvd1024.c
> > index 48527f8..a3071a1 100644
> > --- a/drivers/gpu/drm/bridge/thc63lvd1024.c
> > +++ b/drivers/gpu/drm/bridge/thc63lvd1024.c
> > @@ -10,9 +10,15 @@
> >  #include <drm/drm_panel.h>
> >
> >  #include <linux/gpio/consumer.h>
> > +#include <linux/of.h>
> >  #include <linux/of_graph.h>
> >  #include <linux/regulator/consumer.h>
> >
> > +enum thc63_lvds_mapping_mode {
> > +	THC63_LVDS_MAP_MODE2,
> > +	THC63_LVDS_MAP_MODE1,
> > +};
> > +
> >  enum thc63_ports {
> >  	THC63_LVDS_IN0,
> >  	THC63_LVDS_IN1,
> > @@ -116,6 +122,37 @@ static int thc63_parse_dt(struct thc63_dev *thc63)
> >  	return 0;
> >  }
> >
> > +static int thc63_set_bus_fmt(struct thc63_dev *thc63)
> > +{
> > +	u32 bus_fmt;
> > +	u32 map;
> > +	int ret;
> > +
> > +	ret = of_property_read_u32(thc63->dev->of_node, "thine,map", &map);
> > +	if (ret) {
> > +		dev_err(thc63->dev,
> > +			"Unable to parse property \"thine,map\": %d\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	switch (map) {
> > +	case THC63_LVDS_MAP_MODE1:
> > +		bus_fmt = MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA;
> > +		break;
> > +	case THC63_LVDS_MAP_MODE2:
> > +		bus_fmt = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG;
>
> Why do you assume rgb888/1x7x4 here? It might as well be rgb666/1x7x3
> or rgb101010/1x7x5, no?

I should combine the 'map' pin input mode property with the 'bus_width' one
to find that out probably.

Thanks
   j


>
> Cheers,
> Peter
>
> > +		break;
> > +	default:
> > +		dev_err(thc63->dev,
> > +			"Invalid value for property \"thine,map\": %u\n", map);
> > +		return -EINVAL;
> > +	}
> > +
> > +	drm_bridge_set_bus_formats(&thc63->bridge, &bus_fmt, 1);
> > +
> > +	return 0;
> > +}
> > +
> >  static int thc63_gpio_init(struct thc63_dev *thc63)
> >  {
> >  	thc63->oe = devm_gpiod_get_optional(thc63->dev, "oe", GPIOD_OUT_LOW);
> > @@ -166,6 +203,10 @@ static int thc63_probe(struct platform_device *pdev)
> >  	if (ret)
> >  		return ret;
> >
> > +	ret = thc63_set_bus_fmt(thc63);
> > +	if (ret)
> > +		return ret;
> > +
> >  	thc63->bridge.driver_private = thc63;
> >  	thc63->bridge.of_node = pdev->dev.of_node;
> >  	thc63->bridge.funcs = &thc63_bridge_func;
> >
>

Attachment: signature.asc
Description: PGP signature

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux