On Wed, Apr 18, 2018 at 2:48 PM, Robin Murphy <robin.murphy@xxxxxxx> wrote: > On 18/04/18 09:52, Linus Walleij wrote: >> >> The Versatile Express uses a special configuration controller >> deeply embedded in the system motherboard FPGA to multiplex the >> two to three (!) display controller instances out to the single >> SiI9022 bridge. >> >> Set up an extra file with the logic to probe to the FPGA mux >> register on the system controller bus, then parse the device >> tree to see if there is a CLCD or HDLCD instance on the core >> tile (also known as the daughterboard) by looking in the >> root of the device tree for compatible nodes. >> >> - If there is a HDLCD on the core tile, and there is a driver >> for it, we exit probe and deactivate the motherboard CLCD. >> We do not touch the DVI mux in this case, to make sure we >> don't break HDLCD. >> >> - If there is a CLCD on both the motherboard and the core tile >> (only the CA9 has this) the core tile CLCD takes precedence >> and get muxed to the DVI connector. >> >> - Only if there is no working graphics on the core tile, the >> motherboard CLCD is probed and muxed to the DVI connector. > > > This approach seems reasonable (modulo a couple of nits below), and almost > certainly sufficient for most realistic uses, but I can't help wondering > whether it might be feasible to model the mux with its own separate > connector/bridge driver which could handle prioritisation of multiple inputs > itself (I'm pondering things like RK3288/RK3399 where the two VOPs feeding > into the single HDMI block looks a fair bit like the V2P-CA9 situation if > you squint at it). I did look and make a brief attempt at that approach using a bridge device for the mux. The problem is that the scenario of daisy-chained brigdges isn't really there, I would have to invent the world for this, I added timings to the dumb VGA bridges and now what would be needed (as decribed by Laurent) is a timings daisy-chaining API so that the driver can ask the whole chain of bridges to accumulate timing effects and present the resulting timings. It can be done, but it would sadly also break some implicit assumptions in the existing DT bindings. I would say it is a separate task that can be looked into once we are migrated over to DRM. Yours, Linus Walleij _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
