Hi Laurent, On Fri, Apr 20, 2018 at 01:18:13PM +0300, Laurent Pinchart wrote: > Hello, > > On Friday, 20 April 2018 11:52:35 EEST jacopo mondi wrote: > > Hi Peter, > > I've been a bit a pain in the arse for you recently, but please > > bear with me a bit more, and sorry for jumping late on the band wagon. > > > > On Thu, Apr 19, 2018 at 06:27:44PM +0200, Peter Rosin wrote: > > > Hi! > > > > > > I naively thought that since there was support for both nxp,tda19988 (in > > > the tda998x driver) and the atmel-hlcdc, things would be a smooth ride. > > > But it wasn't, so I started looking around and realized I had to fix > > > things. > > > > > > In v1 and v2 I fixed things by making the atmel-hlcdc driver a master > > > component, but now in v3 I fix things by making the tda998x driver > > > a bridge instead. This was after a suggestion from Boris Brezillion > > > (the atmel-hlcdc maintainer), so there was some risk of bias ... but > > > after comparing what was needed, I too find the bridge approach better. > > > > > > In addition to the above, our PCB interface between the SAMA5D3 and the > > > HDMI encoder is only using 16 bits, and this has to be described > > > somewhere, or the atmel-hlcdc driver have no chance of selecting the > > > correct output mode. Since I have similar problems with a ds90c185 lvds > > > encoder I added patches to override the atmel-hlcdc output format via > > > DT properties compatible with the media video-interface binding and > > > things start to play together. > > > > > > Since this series superseeds the bridge series [1], I have included the > > > leftover bindings patch for the ti,ds90c185 here. > > > > I feel like this series would look better if it would make use of the > > proposed bridge media bus format support I have recently sent out [1] > > (and which was not there when you first sent v1). > > > > I understand your fundamental problem here is that the bus format > > that should be reported by your bridge is different from the ones > > actually supported by the TDA19988 chip, as the wirings ground some > > of the input pins. > > > > Although this is defintely something that could be described in the > > bridge's own OF node with the 'bus_width' property, and what I would do, > > now that you have made a bridge out from the tda19988 driver, is: > > > > 1) Set the bridge accepted input bus_format parsing its pin > > configuration, or default it if that's not implemented yet. > > This will likely be rgb888. You can do that using the trivial > > support for bridge input image formats implemented by my series. > > 2) Specify in the bridge endpoint a 'bus_width' of <16> > > 3) In your atmel-hlcd get both the image format of the bridge (rgb888) > > and parse the remote endpoint property 'bus_width' and get the <16> > > value back. > > Parsing properties of remote nodes should be avoided as much as possible, as > they need to be interpreted in the context of the DT bindings related to the > compatible string applicable to that node. I'd rather have the bus_width > property in the local endpoint node. Right, I see... Well, in Peter's case, the bus width, being a consequence of wirings, can be described safely in both endpoints, right? > > > 4) Set the correct format in the atmel hlcd driver to accommodate a > > bridge that wants rgb888 on a 16 bit wide bus (that would be rgb565, > > or are there other possible combinations I am missing?) > > > > I would consider this better mostly because in this series you are > > creating a semantic for the whole DRM subsystem on the 'bus_width' > > property, where numerical values as '12', '16' etc are arbitrary tied > > to the selection of a media bus format. At least you should use a > > common set of defines [1] between the device tree and the driver, > > but this looks anyway fragile imho. > > This I agree with though. Combining the remote bus format with the local bus > width should fix the problem without having to parse remote properties. > > > Have I maybe missed some parts of the problem you are trying to solve > > here? > > > > Thank you > > j > > > > [1] drm: bridge: Add support for static image formats > > https://lwn.net/Articles/752296/ > > [2] include/uapi/linux/media-bus-format.h > > > > > Anyway, this series solves some real issues for my HW. > > > > > > Cheers, > > > Peter > > > > > > Changes since v2 https://lkml.org/lkml/2018/4/17/385 > > > - patch 2/7 fixed spelling and added an example > > > - patch 4/7 parse the DT up front and store the result indexed by encoder > > > - old patch 5/6 and 6/6 dropped > > > - patch 5-7/7 are new and makes the tda998x driver a drm_bridge > > > > > > Changes since v1 https://lkml.org/lkml/2018/4/9/294 > > > - added reviewed-by from Rob to patch 1/6 > > > - patch 2/6 changed so that the bus format override is in the endpoint > > > DT node, and follows the binding of media video-interfaces. > > > - patch 3/6 is new, it adds drm_of_media_bus_fmt which parses above > > > media video-interface binding (partially). > > > - patch 4/6 now makes use of the above helper (and also fixes problems > > > with the 3/5 patch from v1 when no override was specified). > > > - do not mention unrelated connector display_info details in the cover > > > letter and commit messages. > > > > > > [1] > > > "Bridge" series v2 https://lkml.org/lkml/2018/3/26/610 > > > "Bridge" series v1 https://lkml.org/lkml/2018/3/17/221 > > > > > > Peter Rosin (7): > > > dt-bindings: display: bridge: lvds-transmitter: add ti,ds90c185 > > > dt-bindings: display: atmel: optional video-interface of endpoints > > > drm: of: introduce drm_of_media_bus_fmt > > > drm/atmel-hlcdc: support bus-width (12/16/18/24) in endpoint nodes > > > drm/i2c: tda998x: find the drm_device via the drm_connector > > > drm/i2c: tda998x: split encoder and component functions from the work > > > drm/i2c: tda998x: register as a drm bridge > > > > > > .../devicetree/bindings/display/atmel/hlcdc-dc.txt | 26 +++ > > > .../bindings/display/bridge/lvds-transmitter.txt | 8 +- > > > drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 71 ++++++-- > > > drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h | 2 + > > > drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c | 40 +++- > > > drivers/gpu/drm/drm_of.c | 38 ++++ > > > drivers/gpu/drm/i2c/tda998x_drv.c | 201 ++++++++++++++-- > > > include/drm/drm_of.h | 7 + > > > 8 files changed, 342 insertions(+), 51 deletions(-) > > -- > Regards, > > Laurent Pinchart > > >
Attachment:
signature.asc
Description: PGP signature
_______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
