Hi Vladimir,
On Thu, Apr 19, 2018 at 02:18:30PM +0300, Vladimir Zapolskiy wrote:
> Hi Jacopo,
>
> On 04/10/2018 01:53 PM, Jacopo Mondi wrote:
> > Add DRM bridge driver for Thine THC63LVD1024 LVDS to digital parallel
> > output converter.
> >
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> > Reviewed-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
> > Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
>
> Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
>
Thanks. FYI I sent v9 yesterday with a minimal change compared to v8.
> Generally I have only one pretty ignorable comment.
>
> > +
> > +enum thc63_ports {
> > + THC63_LVDS_IN0,
> > + THC63_LVDS_IN1,
> > + THC63_RGB_OUT0,
> > + THC63_RGB_OUT1,
> > +};
> > +
>
> The driver uses only THC63_RGB_OUT0 value, or port@2, and MODE{0,1,2} IC
> configuration is ignored.
>
> I don't know if right from the beginning it would be better to support
> dual-out modes, preferably both single-in and dual-in ones. Will it
> impact port enumeration?
The bindings have been designed to support dual in/out modes, as you
can see there are 4 possible ports described there:
Required video port nodes:
- port@0: First LVDS input port
- port@2: First digital CMOS/TTL parallel output
Optional video port nodes:
- port@1: Second LVDS input port
- port@3: Second digital CMOS/TTL parallel output
Future extension should not require changing the port enumeration,
just add a property to specify the selected mode.
>
> I do understand that the extension is possible, and likely only hardware
> accessibility postpones it.
Yes, hardware on one side, but also what I think is a shortcoming of
DRM (which exists in other sub-systems, say v4l2) that matches devices
on their OF device nodes and makes cumbersome handling drivers wanting
to register on 'port' nodes instead, as it would happen if you have 2
input endpoints.
See my [1] note here: https://lkml.org/lkml/2018/3/9/422
And this reply to Archit's comment which has been left floating as it
is not a real issue (yet): https://lkml.org/lkml/2018/3/10/214
Thanks
j
>
> --
> With best wishes,
> Vladimir
Attachment:
signature.asc
Description: PGP signature
_______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
