From: Rob Clark <rob@xxxxxx>
Signed-off-by: Rob Clark <rob@xxxxxx>
---
This one is a bit f-ugly.. kms_bo_create() and dumb-scanout alloc only
really knows about allocating 4byte/pixel buffers, so we just allocate
oversized buffers and use the part we need. It is functional enough
to test the driver (or at least omapdrm), but I'm not sure about how
best to deal w/ kms_bo_create(). (Or perhaps I should only test YUV
support in omapdrmtest tree, and not try to use generic kms_bo_create()?)
tests/modetest/modetest.c | 151 ++++++++++++++++++++++++++++++++++++++++++---
1 files changed, 142 insertions(+), 9 deletions(-)
diff --git a/tests/modetest/modetest.c b/tests/modetest/modetest.c
index 2936de0..36bdfff 100644
--- a/tests/modetest/modetest.c
+++ b/tests/modetest/modetest.c
@@ -335,6 +335,7 @@ struct plane {
uint32_t con_id; /* the id of connector to bind to */
uint32_t w, h;
unsigned int fb_id;
+ char format_str[5]; /* need to leave room for terminating \0 */
};
static void
@@ -594,6 +595,63 @@ page_flip_handler(int fd, unsigned int frame,
}
}
+/* swap these for big endian.. */
+#define RED 2
+#define GREEN 1
+#define BLUE 0
+
+static void
+fill420(unsigned char *y, unsigned char *u, unsigned char *v,
+ int cs /*chroma pixel stride */,
+ int n, int width, int height, int stride)
+{
+ int i, j;
+
+ /* paint the buffer with colored tiles, in blocks of 2x2 */
+ for (j = 0; j < height; j+=2) {
+ unsigned char *y1p = y + j * stride;
+ unsigned char *y2p = y1p + stride;
+ unsigned char *up = u + (j/2) * stride * cs / 2;
+ unsigned char *vp = v + (j/2) * stride * cs / 2;
+
+ for (i = 0; i < width; i+=2) {
+ div_t d = div(n+i+j, width);
+ uint32_t rgb = 0x00130502 * (d.quot >> 6) + 0x000a1120 * (d.rem >> 6);
+ unsigned char *rgbp = (unsigned char *)&rgb;
+ unsigned char y = (0.299 * rgbp[RED]) + (0.587 * rgbp[GREEN]) + (0.114 * rgbp[BLUE]);
+
+ *(y2p++) = *(y1p++) = y;
+ *(y2p++) = *(y1p++) = y;
+
+ *up = (rgbp[BLUE] - y) * 0.565 + 128;
+ *vp = (rgbp[RED] - y) * 0.713 + 128;
+ up += cs;
+ vp += cs;
+ }
+ }
+}
+
+static void
+fill422(unsigned char *virtual, int n, int width, int height, int stride)
+{
+ int i, j;
+ /* paint the buffer with colored tiles */
+ for (j = 0; j < height; j++) {
+ uint8_t *ptr = (uint8_t*)((char*)virtual + j * stride);
+ for (i = 0; i < width; i++) {
+ div_t d = div(n+i+j, width);
+ uint32_t rgb = 0x00130502 * (d.quot >> 6) + 0x000a1120 * (d.rem >> 6);
+ unsigned char *rgbp = (unsigned char *)&rgb;
+ unsigned char y = (0.299 * rgbp[RED]) + (0.587 * rgbp[GREEN]) + (0.114 * rgbp[BLUE]);
+
+ *(ptr++) = y;
+ *(ptr++) = (rgbp[BLUE] - y) * 0.565 + 128;
+ *(ptr++) = y;
+ *(ptr++) = (rgbp[RED] - y) * 0.713 + 128;
+ }
+ }
+}
+
static int
set_plane(struct kms_driver *kms, struct connector *c, struct plane *p)
{
@@ -602,8 +660,8 @@ set_plane(struct kms_driver *kms, struct connector *c, struct plane *p)
uint32_t handles[4], pitches[4], offsets[4] = {0}; /* we only use [0] */
uint32_t plane_id = 0;
struct kms_bo *plane_bo;
- uint32_t plane_flags = 0;
- int i, crtc_x, crtc_y, crtc_w, crtc_h;
+ uint32_t plane_flags = 0, format;
+ int i, ret, crtc_x, crtc_y, crtc_w, crtc_h;
/* find an unused plane which can be connected to our crtc */
plane_resources = drmModeGetPlaneResources(fd);
@@ -627,19 +685,87 @@ set_plane(struct kms_driver *kms, struct connector *c, struct plane *p)
drmModeFreePlane(ovr);
}
+ fprintf(stderr, "testing %dx%d@%s overlay plane\n",
+ p->w, p->h, p->format_str);
+
if (!plane_id) {
fprintf(stderr, "failed to find plane!\n");
return -1;
}
- /* TODO.. would be nice to test YUV overlays.. */
- if (create_test_buffer(kms, p->w, p->h, &pitches[0], &plane_bo))
- return -1;
+ if (!strcmp(p->format_str, "XR24")) {
+ if (create_test_buffer(kms, p->w, p->h, &pitches[0], &plane_bo))
+ return -1;
+ kms_bo_get_prop(plane_bo, KMS_HANDLE, &handles[0]);
+ format = DRM_FORMAT_XRGB8888;
+ } else {
+ void *virtual;
+
+ /* TODO: this always allocates a buffer for 32bpp RGB.. but for
+ * YUV formats, we don't use all of it.. since 4bytes/pixel is
+ * worst case, so live with it for now and just don't use all
+ * the buffer:
+ */
+ plane_bo = allocate_buffer(kms, p->w, p->h, &pitches[0]);
+ if (!plane_bo)
+ return -1;
- kms_bo_get_prop(plane_bo, KMS_HANDLE, &handles[0]);
+ ret = kms_bo_map(plane_bo, &virtual);
+ if (ret) {
+ fprintf(stderr, "failed to map buffer: %s\n",
+ strerror(-ret));
+ kms_bo_destroy(&plane_bo);
+ return -1;
+ }
+
+ /* just testing a limited # of formats to test single
+ * and multi-planar path.. would be nice to add more..
+ */
+ if (!strcmp(p->format_str, "YUYV")) {
+ pitches[0] = p->w * 2;
+ offsets[0] = 0;
+ kms_bo_get_prop(plane_bo, KMS_HANDLE, &handles[0]);
+
+ fill422(virtual, 0, p->w, p->h, pitches[0]);
+
+ format = DRM_FORMAT_YUYV;
+ } else if (!strcmp(p->format_str, "NV12")) {
+ pitches[0] = p->w;
+ offsets[0] = 0;
+ kms_bo_get_prop(plane_bo, KMS_HANDLE, &handles[0]);
+ pitches[1] = p->w;
+ offsets[1] = p->w * p->h;
+ kms_bo_get_prop(plane_bo, KMS_HANDLE, &handles[1]);
+
+ fill420(virtual, virtual+offsets[1], virtual+offsets[1]+1,
+ 2, 0, p->w, p->h, pitches[0]);
+
+ format = DRM_FORMAT_NV12;
+ } else if (!strcmp(p->format_str, "YV12")) {
+ pitches[0] = p->w;
+ offsets[0] = 0;
+ kms_bo_get_prop(plane_bo, KMS_HANDLE, &handles[0]);
+ pitches[1] = p->w / 2;
+ offsets[1] = p->w * p->h;
+ kms_bo_get_prop(plane_bo, KMS_HANDLE, &handles[1]);
+ pitches[2] = p->w / 2;
+ offsets[2] = offsets[1] + (p->w * p->h) / 4;
+ kms_bo_get_prop(plane_bo, KMS_HANDLE, &handles[1]);
+
+ fill420(virtual, virtual+offsets[1], virtual+offsets[2],
+ 1, 0, p->w, p->h, pitches[0]);
+
+ format = DRM_FORMAT_YVU420;
+ } else {
+ fprintf(stderr, "Unknown format: %s\n", p->format_str);
+ return -1;
+ }
+
+ kms_bo_unmap(plane_bo);
+ }
/* just use single plane format for now.. */
- if (drmModeAddFB2(fd, p->w, p->h, DRM_FORMAT_XRGB8888,
+ if (drmModeAddFB2(fd, p->w, p->h, format,
handles, pitches, offsets, &p->fb_id, plane_flags)) {
fprintf(stderr, "failed to add fb: %s\n", strerror(errno));
return -1;
@@ -826,6 +952,7 @@ void usage(char *name)
fprintf(stderr, "\t-s <connector_id>:<mode>\tset a mode\n");
fprintf(stderr, "\t-s <connector_id>@<crtc_id>:<mode>\tset a mode\n");
fprintf(stderr, "\t-P <connector_id>:<w>x<h>\tset a plane\n");
+ fprintf(stderr, "\t-P <connector_id>:<w>x<h>@<format>\tset a plane\n");
fprintf(stderr, "\n\tDefault is to dump all info.\n");
exit(0);
}
@@ -862,7 +989,7 @@ int main(int argc, char **argv)
char *modeset = NULL;
int i, count = 0, plane_count = 0;
struct connector con_args[2];
- struct plane plane_args[2];
+ struct plane plane_args[2] = {0};
opterr = 0;
while ((c = getopt(argc, argv, optstr)) != -1) {
@@ -900,7 +1027,13 @@ int main(int argc, char **argv)
count++;
break;
case 'P':
- if (sscanf(optarg, "%d:%dx%d",
+ strcpy(plane_args[plane_count].format_str, "XR24");
+ if (sscanf(optarg, "%d:%dx%d@%4s",
+ &plane_args[plane_count].con_id,
+ &plane_args[plane_count].w,
+ &plane_args[plane_count].h,
+ plane_args[plane_count].format_str) != 4 &&
+ sscanf(optarg, "%d:%dx%d",
&plane_args[plane_count].con_id,
&plane_args[plane_count].w,
&plane_args[plane_count].h) != 3)
--
1.7.5.4
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
