Re: [PATCH v8 1/2] dt-bindings: display: bridge: Document THC63LVD1024 LVDS decoder

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jacopo,

On 04/19/2018 12:44 PM, Vladimir Zapolskiy wrote:
> Hi Jacopo, Laurent,
> 
> On 04/10/2018 01:53 PM, Jacopo Mondi wrote:
>> Document Thine THC63LVD1024 LVDS decoder device tree bindings.
>>
>> Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
>> Reviewed-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
>> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
>> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> 
> Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
> 
>> ---
>>  .../bindings/display/bridge/thine,thc63lvd1024.txt | 60 ++++++++++++++++++++++
>>  1 file changed, 60 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
>>
>> diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
>> new file mode 100644
>> index 0000000..0b23e70
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
>> @@ -0,0 +1,60 @@
>> +Thine Electronics THC63LVD1024 LVDS decoder
>> +-------------------------------------------
>> +
>> +The THC63LVD1024 is a dual link LVDS receiver designed to convert LVDS streams
>> +to parallel data outputs. The chip supports single/dual input/output modes,
>> +handling up to two LVDS input streams and up to two digital CMOS/TTL outputs.
>> +
>> +Single or dual operation mode, output data mapping and DDR output modes are
>> +configured through input signals and the chip does not expose any control bus.
>> +
>> +Required properties:
>> +- compatible: Shall be "thine,thc63lvd1024"
>> +- vcc-supply: Power supply for TTL output, TTL CLOCKOUT signal, LVDS input,
>> +  PPL and digital circuitry
>> +
>> +Optional properties:
>> +- powerdown-gpios: Power down GPIO signal, pin name "/PDWN". Active low
> 

sorry for a follow-up, I've just noticed it, could you please double check
spelling PDWN vs PWDN? Thank you in advance.

--
With best wishes,
Vladimir
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux