As I have another series which is based on this one + Eagle board display support, I'm re-sending this one to fix the small issue I pointed out in my reply to v8. Simon: no changes to Eagle DTS series, so the last one sent is still the good one. DRM: I have collected several reviewed-by tags both on driver and bindings. Can I send out incremental patches on this series and consider this one to be ready to be collected? Thanks j v8 -> v9: - Put 'remote' OF node after usage not just in error path during device tree parsing routine - Add Rob's Reviewed-by tag to the device tree bindings documentation v7 -> b8: - Make 'vcc' supply mandatory - Use 'oe' property name to describe "OE" pin - Minor fixes as suggested by Laurent on bindings and driver v6 -> v7: - Use semi-standard names for powerdown and output enable GPIOs as suggested by Rob and Vladimir - Use 'regulator_get()' not the optional version, and list only 'vcc' as requested supply - Addressed Laurent's review comments and removed Eagle display enablement patch to be sent separately v5 -> v6: - Drop check for CONFIG_OF as it is a Kconfig dependency - Add Niklas Reviewed-by tags - List [3/3] depenencies below commit message to ease integration v4 -> v5: - Fix punctuation in bindings documentation - Add small statement to bindings document to clarify the chip has no control bus - Print regulator name in enable/disable routines error path - Add Andrzej Reviewed-by tag v3 -> v4: - Rename permutations of "pdwn" to just "pdwn" everywhere in the series - Improve power enable/disable routines as suggested by Andrzej and Sergei - Change "pdwn" gpio initialization to use the logical output level - Change Kconfig description v2 -> v3: - Drop support for "lvds-decoder" and make the driver THC63LVD1024 specific -- Rework bindings to describe multiple input/output ports -- Rename driver and remove "lvds-decoder" references -- Rework Eagle DTS to use new bindings v1 -> v2: - Drop support for THC63LVD1024 Jacopo Mondi (2): dt-bindings: display: bridge: Document THC63LVD1024 LVDS decoder drm: bridge: Add thc63lvd1024 LVDS decoder driver .../bindings/display/bridge/thine,thc63lvd1024.txt | 60 ++++++ drivers/gpu/drm/bridge/Kconfig | 6 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/thc63lvd1024.c | 205 +++++++++++++++++++++ 4 files changed, 272 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt create mode 100644 drivers/gpu/drm/bridge/thc63lvd1024.c -- 2.7.4 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
