Selecting CONFIG_HDMI for S390 is inappropriate - there is no real
graphic hardware on this architecture. The drm subsystem is only
enabled here for using the virtual graphics card "virtio-gpu". So
it should be possible to compile the drm subsystem also without
CONFIG_I2C. Tweak the Makefile to only compile the affected files
with CONFIG_I2C=y and disable some I2C-related code in drm_edid.c.
Signed-off-by: Thomas Huth <thuth@xxxxxxxxxx>
---
drivers/gpu/drm/Kconfig | 4 ++--
drivers/gpu/drm/Makefile | 16 +++++++++-------
drivers/gpu/drm/drm_edid.c | 10 +++++++---
3 files changed, 18 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 298a518..c9df67f 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -10,8 +10,8 @@ menuconfig DRM
select DRM_PANEL_ORIENTATION_QUIRKS
select HDMI if !S390
select FB_CMDLINE
- select I2C
- select I2C_ALGOBIT
+ select I2C if !S390
+ select I2C_ALGOBIT if !S390
select DMA_SHARED_BUFFER
select SYNC_FILE
help
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index 16fd8e3..4cf53ba 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -7,10 +7,9 @@ drm-y := drm_auth.o drm_bufs.o drm_cache.o \
drm_context.o drm_dma.o \
drm_file.o drm_gem.o drm_ioctl.o drm_irq.o \
drm_lock.o drm_memory.o drm_drv.o \
- drm_scatter.o drm_pci.o \
+ drm_scatter.o drm_pci.o drm_info.o \
drm_sysfs.o drm_hashtab.o drm_mm.o \
drm_crtc.o drm_fourcc.o drm_modes.o drm_edid.o \
- drm_info.o drm_encoder_slave.o \
drm_trace_points.o drm_global.o drm_prime.o \
drm_rect.o drm_vma_manager.o drm_flip_work.o \
drm_modeset_lock.o drm_atomic.o drm_bridge.o \
@@ -20,6 +19,7 @@ drm-y := drm_auth.o drm_bufs.o drm_cache.o \
drm_dumb_buffers.o drm_mode_config.o drm_vblank.o \
drm_syncobj.o drm_lease.o
+drm-$(CONFIG_I2C) += drm_encoder_slave.o
drm-$(CONFIG_HDMI) += drm_hdmi.o
drm-$(CONFIG_DRM_LIB_RANDOM) += lib/drm_random.o
drm-$(CONFIG_DRM_VM) += drm_vm.o
@@ -32,11 +32,13 @@ drm-$(CONFIG_AGP) += drm_agpsupport.o
drm-$(CONFIG_DEBUG_FS) += drm_debugfs.o drm_debugfs_crc.o
drm-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o
-drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o drm_probe_helper.o \
- drm_plane_helper.o drm_dp_mst_topology.o drm_atomic_helper.o \
- drm_kms_helper_common.o drm_dp_dual_mode_helper.o \
- drm_simple_kms_helper.o drm_modeset_helper.o \
- drm_scdc_helper.o drm_gem_framebuffer_helper.o
+drm_kms_helper-y := drm_crtc_helper.o drm_probe_helper.o \
+ drm_plane_helper.o drm_atomic_helper.o \
+ drm_gem_framebuffer_helper.o drm_kms_helper_common.o \
+ drm_simple_kms_helper.o drm_modeset_helper.o
+
+drm_kms_helper-$(CONFIG_I2C) += drm_dp_helper.o drm_dp_mst_topology.o \
+ drm_dp_dual_mode_helper.o drm_scdc_helper.o
drm_kms_helper-$(CONFIG_DRM_PANEL_BRIDGE) += bridge/panel.o
drm_kms_helper-$(CONFIG_DRM_FBDEV_EMULATION) += drm_fb_helper.o
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 3820763..0d0d5af 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -1467,11 +1467,14 @@ bool drm_edid_is_valid(struct edid *edid)
static int
drm_do_probe_ddc_edid(void *data, u8 *buf, unsigned int block, size_t len)
{
- struct i2c_adapter *adapter = data;
- unsigned char start = block * EDID_LENGTH;
unsigned char segment = block >> 1;
unsigned char xfers = segment ? 3 : 2;
- int ret, retries = 5;
+ int ret = -1;
+
+#if IS_ENABLED(CONFIG_I2C)
+ struct i2c_adapter *adapter = data;
+ unsigned char start = block * EDID_LENGTH;
+ int retries = 5;
/*
* The core I2C driver will automatically retry the transfer if the
@@ -1512,6 +1515,7 @@ bool drm_edid_is_valid(struct edid *edid)
break;
}
} while (ret != xfers && --retries);
+#endif /* CONFIG_I2C */
return ret == xfers ? 0 : -1;
}
--
1.8.3.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
