(changed subject and decoupling from udmabuf thread) On Wed, Apr 11, 2018 at 08:59:32AM +0300, Oleksandr Andrushchenko wrote: > On 04/10/2018 08:26 PM, Dongwon Kim wrote: > >On Tue, Apr 10, 2018 at 09:37:53AM +0300, Oleksandr Andrushchenko wrote: > >>On 04/06/2018 09:57 PM, Dongwon Kim wrote: > >>>On Fri, Apr 06, 2018 at 03:36:03PM +0300, Oleksandr Andrushchenko wrote: > >>>>On 04/06/2018 02:57 PM, Gerd Hoffmann wrote: > >>>>> Hi, > >>>>> > >>>>>>>I fail to see any common ground for xen-zcopy and udmabuf ... > >>>>>>Does the above mean you can assume that xen-zcopy and udmabuf > >>>>>>can co-exist as two different solutions? > >>>>>Well, udmabuf route isn't fully clear yet, but yes. > >>>>> > >>>>>See also gvt (intel vgpu), where the hypervisor interface is abstracted > >>>>>away into a separate kernel modules even though most of the actual vgpu > >>>>>emulation code is common. > >>>>Thank you for your input, I'm just trying to figure out > >>>>which of the three z-copy solutions intersect and how much > >>>>>>And what about hyper-dmabuf? > >>>xen z-copy solution is pretty similar fundamentally to hyper_dmabuf > >>>in terms of these core sharing feature: > >>> > >>>1. the sharing process - import prime/dmabuf from the producer -> extract > >>>underlying pages and get those shared -> return references for shared pages > >Another thing is danvet was kind of against to the idea of importing existing > >dmabuf/prime buffer and forward it to the other domain due to synchronization > >issues. He proposed to make hyper_dmabuf only work as an exporter so that it > >can have a full control over the buffer. I think we need to talk about this > >further as well. > Yes, I saw this. But this limits the use-cases so much. I agree. Our current approach is a lot more flexible. You can find very similar feedback in my reply to those review messages. However, I also understand Daniel's concern as well. I believe we need more dicussion regarding this matter. > For instance, running Android as a Guest (which uses ION to allocate > buffers) means that finally HW composer will import dma-buf into > the DRM driver. Then, in case of xen-front for example, it needs to be > shared with the backend (Host side). Of course, we can change user-space > to make xen-front allocate the buffers (make it exporter), but what we try > to avoid is to change user-space which in normal world would have remain > unchanged otherwise. > So, I do think we have to support this use-case and just have to understand > the complexity. > > > > >danvet, can you comment on this topic? > > > >>>2. the page sharing mechanism - it uses Xen-grant-table. > >>> > >>>And to give you a quick summary of differences as far as I understand > >>>between two implementations (please correct me if I am wrong, Oleksandr.) > >>> > >>>1. xen-zcopy is DRM specific - can import only DRM prime buffer > >>>while hyper_dmabuf can export any dmabuf regardless of originator > >>Well, this is true. And at the same time this is just a matter > >>of extending the API: xen-zcopy is a helper driver designed for > >>xen-front/back use-case, so this is why it only has DRM PRIME API > >>>2. xen-zcopy doesn't seem to have dma-buf synchronization between two VMs > >>>while (as danvet called it as remote dmabuf api sharing) hyper_dmabuf sends > >>>out synchronization message to the exporting VM for synchronization. > >>This is true. Again, this is because of the use-cases it covers. > >>But having synchronization for a generic solution seems to be a good idea. > >Yeah, understood xen-zcopy works ok with your use case. But I am just curious > >if it is ok not to have any inter-domain synchronization in this sharing model. > The synchronization is done with displif protocol [1] > >The buffer being shared is technically dma-buf and originator needs to be able > >to keep track of it. > As I am working in DRM terms the tracking is done by the DRM core > for me for free. (This might be one of the reasons Daniel sees DRM > based implementation fit very good from code-reuse POV). yeah but once you have a DRM object (whether it's dmabuf or not) on a remote domain, it is totally new object and out of sync (correct me if I am wrong) with original DRM prime, isn't it? How could these two different but based on same pages be synchronized? > > > >>>3. 1-level references - when using grant-table for sharing pages, there will > >>>be same # of refs (each 8 byte) > >>To be precise, grant ref is 4 bytes > >You are right. Thanks for correction.;) > > > >>>as # of shared pages, which is passed to > >>>the userspace to be shared with importing VM in case of xen-zcopy. > >>The reason for that is that xen-zcopy is a helper driver, e.g. > >>the grant references come from the display backend [1], which implements > >>Xen display protocol [2]. So, effectively the backend extracts references > >>from frontend's requests and passes those to xen-zcopy as an array > >>of refs. > >>> Compared > >>>to this, hyper_dmabuf does multiple level addressing to generate only one > >>>reference id that represents all shared pages. > >>In the protocol [2] only one reference to the gref directory is passed > >>between VMs > >>(and the gref directory is a single-linked list of shared pages containing > >>all > >>of the grefs of the buffer). > >ok, good to know. I will look into its implementation in more details but is > >this gref directory (chained grefs) something that can be used for any general > >memory sharing use case or is it jsut for xen-display (in current code base)? > Not to mislead you: one grant ref is passed via displif protocol, > but the page it's referencing contains the rest of the grant refs. > I checked displif.h. I like the concept of chaining 2nd level grefs. As you should have already realized, our multi-level addressing is almost identical to gref directory except that we defined another level on top to address multiple 2nd level grefs instead of creating a linked list. And I see there would be an advantage in terms of memory saving in your method. Now I think why it should be remaining as one of displif features. I think we could expand this to any type of large buffer sharing use-case in Xen (possibly as an extension to grant-table driver?) > As to if this can be used for any memory: yes. It is the same for > sndif and displif Xen protocols, but defined twice as strictly speaking > sndif and displif are two separate protocols. > > While reviewing your RFC v2 one of the comments I had [2] was that if we > can start from defining such a generic protocol for hyper-dmabuf. > It can be a header file, which not only has the description part > (which then become a part of Documentation/...rst file), but also defines > all the required constants for requests, responses, defines message formats, > state diagrams etc. all at one place. Of course this protocol must not be > Xen specific, but be OS/hypervisor agnostic. > Having that will trigger a new round of discussion, so we have it all > designed > and discussed before we start implementing. > > Besides the protocol we have to design UAPI part as well and make sure > the hyper-dmabuf is not only accessible from user-space, but there will be > number > of kernel-space users as well. > > > >>>4. inter VM messaging (hype_dmabuf only) - hyper_dmabuf has inter-vm msg > >>>communication defined for dmabuf synchronization and private data (meta > >>>info that Matt Roper mentioned) exchange. > >>This is true, xen-zcopy has no means for inter VM sync and meta-data, > >>simply because it doesn't have any code for inter VM exchange in it, > >>e.g. the inter VM protocol is handled by the backend [1]. > >>>5. driver-to-driver notification (hyper_dmabuf only) - importing VM gets > >>>notified when newdmabuf is exported from other VM - uevent can be optionally > >>>generated when this happens. > >>> > >>>6. structure - hyper_dmabuf is targetting to provide a generic solution for > >>>inter-domain dmabuf sharing for most hypervisors, which is why it has two > >>>layers as mattrope mentioned, front-end that contains standard API and backend > >>>that is specific to hypervisor. > >>Again, xen-zcopy is decoupled from inter VM communication > >>>>>No idea, didn't look at it in detail. > >>>>> > >>>>>Looks pretty complex from a distant view. Maybe because it tries to > >>>>>build a communication framework using dma-bufs instead of a simple > >>>>>dma-buf passing mechanism. > >>>we started with simple dma-buf sharing but realized there are many > >>>things we need to consider in real use-case, so we added communication > >>>, notification and dma-buf synchronization then re-structured it to > >>>front-end and back-end (this made things more compicated..) since Xen > >>>was not our only target. Also, we thought passing the reference for the > >>>buffer (hyper_dmabuf_id) is not secure so added uvent mechanism later. > >>> > >>>>Yes, I am looking at it now, trying to figure out the full story > >>>>and its implementation. BTW, Intel guys were about to share some > >>>>test application for hyper-dmabuf, maybe I have missed one. > >>>>It could probably better explain the use-cases and the complexity > >>>>they have in hyper-dmabuf. > >>>One example is actually in github. If you want take a look at it, please > >>>visit: > >>> > >>>https://github.com/downor/linux_hyper_dmabuf_test/tree/xen/simple_export > >>Thank you, I'll have a look > >>>>>Like xen-zcopy it seems to depend on the idea that the hypervisor > >>>>>manages all memory it is easy for guests to share pages with the help of > >>>>>the hypervisor. > >>>>So, for xen-zcopy we were not trying to make it generic, > >>>>it just solves display (dumb) zero-copying use-cases for Xen. > >>>>We implemented it as a DRM helper driver because we can't see any > >>>>other use-cases as of now. > >>>>For example, we also have Xen para-virtualized sound driver, but > >>>>its buffer memory usage is not comparable to what display wants > >>>>and it works somewhat differently (e.g. there is no "frame done" > >>>>event, so one can't tell when the sound buffer can be "flipped"). > >>>>At the same time, we do not use virtio-gpu, so this could probably > >>>>be one more candidate for shared dma-bufs some day. > >>>>> Which simply isn't the case on kvm. > >>>>> > >>>>>hyper-dmabuf and xen-zcopy could maybe share code, or hyper-dmabuf build > >>>>>on top of xen-zcopy. > >>>>Hm, I can imagine that: xen-zcopy could be a library code for hyper-dmabuf > >>>>in terms of implementing all that page sharing fun in multiple directions, > >>>>e.g. Host->Guest, Guest->Host, Guest<->Guest. > >>>>But I'll let Matt and Dongwon to comment on that. > >>>I think we can definitely collaborate. Especially, maybe we are using some > >>>outdated sharing mechanism/grant-table mechanism in our Xen backend (thanks > >>>for bringing that up Oleksandr). However, the question is once we collaborate > >>>somehow, can xen-zcopy's usecase use the standard API that hyper_dmabuf > >>>provides? I don't think we need different IOCTLs that do the same in the final > >>>solution. > >>> > >>If you think of xen-zcopy as a library (which implements Xen > >>grant references mangling) and DRM PRIME wrapper on top of that > >>library, we can probably define proper API for that library, > >>so both xen-zcopy and hyper-dmabuf can use it. What is more, I am > >>about to start upstreaming Xen para-virtualized sound device driver soon, > >>which also uses similar code and gref passing mechanism [3]. > >>(Actually, I was about to upstream drm/xen-front, drm/xen-zcopy and > >>snd/xen-front and then propose a Xen helper library for sharing big buffers, > >>so common code of the above drivers can use the same code w/o code > >>duplication) > >I think it is possible to use your functions for memory sharing part in > >hyper_dmabuf's backend (this 'backend' means the layer that does page sharing > >and inter-vm communication with xen-specific way.), so why don't we work on > >"Xen helper library for sharing big buffers" first while we continue our > >discussion on the common API layer that can cover any dmabuf sharing cases. > > > Well, I would love we reuse the code that I have, but I also > understand that it was limited by my use-cases. So, I do not > insist we have to ;) > If we start designing and discussing hyper-dmabuf protocol we of course > can work on this helper library in parallel. > >>Thank you, > >>Oleksandr > >> > >>P.S. All, is it a good idea to move this out of udmabuf thread into a > >>dedicated one? > >Either way is fine with me. > So, if you can start designing the protocol we may have a dedicated mail > thread for that. I will try to help with the protocol as much as I can Sure thanks. We can talk about it. just FYI, I have prepared a application note that contains definition of hyper_dmabuf messages included in RFC v2 patch. That would be a great starting point. It will be great if you can review it. > > >>>>>cheers, > >>>>> Gerd > >>>>> > >>>>Thank you, > >>>>Oleksandr > >>>> > >>>>P.S. Sorry for making your original mail thread to discuss things much > >>>>broader than your RFC... > >>>> > >>[1] https://github.com/xen-troops/displ_be > >>[2] https://elixir.bootlin.com/linux/v4.16-rc7/source/include/xen/interface/io/displif.h#L484 > >>[3] https://elixir.bootlin.com/linux/v4.16-rc7/source/include/xen/interface/io/sndif.h > >> > [1] https://elixir.bootlin.com/linux/v4.16-rc7/source/include/xen/interface/io/displif.h > [2] > https://lists.xenproject.org/archives/html/xen-devel/2018-04/msg00685.html _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
