There's an ongoing effort to remove VLAs[1] from the kernel to eventually turn on -Wvla. The vla in reg_write_range is based on the length of data passed. The one use of a non-constant size for this range is bounded by the size buffer passed to hdmi_infoframe_pack which is a fixed size. Switch to this upper bound. [1] https://lkml.org/lkml/2018/3/7/621 Signed-off-by: Laura Abbott <labbott@xxxxxxxxxx> --- v2: Switch to make the buffer size more transparent and add a bounds check. --- drivers/gpu/drm/i2c/tda998x_drv.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c index 9e67a7b4e3a4..c8b6029b7839 100644 --- a/drivers/gpu/drm/i2c/tda998x_drv.c +++ b/drivers/gpu/drm/i2c/tda998x_drv.c @@ -466,13 +466,22 @@ reg_read_range(struct tda998x_priv *priv, u16 reg, char *buf, int cnt) return ret; } +#define MAX_WRITE_RANGE_BUF 32 + static void reg_write_range(struct tda998x_priv *priv, u16 reg, u8 *p, int cnt) { struct i2c_client *client = priv->hdmi; - u8 buf[cnt+1]; + /* This is the maximum size of the buffer passed in */ + u8 buf[MAX_WRITE_RANGE_BUF + 1]; int ret; + if (cnt > MAX_WRITE_RANGE_BUF) { + dev_err(&client->dev, "Fixed write buffer too small (%d)\n", + MAX_WRITE_RANGE_BUF); + return; + } + buf[0] = REG2ADDR(reg); memcpy(&buf[1], p, cnt); @@ -679,7 +688,7 @@ static void tda998x_write_if(struct tda998x_priv *priv, u8 bit, u16 addr, union hdmi_infoframe *frame) { - u8 buf[32]; + u8 buf[MAX_WRITE_RANGE_BUF]; ssize_t len; len = hdmi_infoframe_pack(frame, buf, sizeof(buf)); -- 2.14.3 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
