On 2018-04-10 03:37 AM, Michel Dänzer wrote: > On 2018-04-10 08:45 AM, Christian König wrote: >> Am 09.04.2018 um 23:45 schrieb Manasi Navare: >>> Thanks for initiating the discussion. Find my comments below: >>> On Mon, Apr 09, 2018 at 04:00:21PM -0400, Harry Wentland wrote: >>>> On 2018-04-09 03:56 PM, Harry Wentland wrote: >>>>> >>>>> === A DRM render API to support variable refresh rates === >>>>> >>>>> In order to benefit from adaptive sync and VRR userland needs a way >>>>> to let us know whether to vary frame timings or to target a >>>>> different frame time. These can be provided as atomic properties on >>>>> a CRTC: >>>>> * bool variable_refresh_compatible >>>>> * int target_frame_duration_ns (nanosecond frame duration) >>>>> >>>>> This gives us the following cases: >>>>> >>>>> variable_refresh_compatible = 0, target_frame_duration_ns = 0 >>>>> * drive monitor at timing's normal refresh rate >>>>> >>>>> variable_refresh_compatible = 1, target_frame_duration_ns = 0 >>>>> * send new frame to monitor as soon as it's available, if within >>>>> min/max of monitor's reported capabilities >>>>> >>>>> variable_refresh_compatible = 0/1, target_frame_duration_ns = > 0 >>>>> * send new frame to monitor with the specified >>>>> target_frame_duration_ns >>>>> >>>>> When a target_frame_duration_ns or variable_refresh_compatible >>>>> cannot be supported the atomic check will reject the commit. >>>>> >>> What I would like is two sets of properties on a CRTC or preferably on >>> a connector: >>> >>> KMD properties that UMD can query: >>> * vrr_capable - This will be an immutable property for exposing >>> hardware's capability of supporting VRR. This will be set by the >>> kernel after >>> reading the EDID mode information and monitor range capabilities. >>> * vrr_vrefresh_max, vrr_vrefresh_min - To expose the min and max >>> refresh rates supported. >>> These properties are optional and will be created and attached to the >>> DP/eDP connector when the connector >>> is getting intialized. >> >> Mhm, aren't those properties actually per mode and not per CRTC/connector? >> >>> Properties that you mentioned above that the UMD can set before kernel >>> can enable VRR functionality >>> *bool vrr_enable or vrr_compatible >>> target_frame_duration_ns >> >> Yeah, that certainly makes sense. But target_frame_duration_ns is a bad >> name/semantics. >> >> We should use an absolute timestamp where the frame should be presented, >> otherwise you could run into a bunch of trouble with IOCTL restarts or >> missed blanks. > > Also, a fixed target frame duration isn't suitable even for video > playback, due to drift between the video and audio clocks. > > Time-based presentation seems to be the right approach for preventing > micro-stutter in games as well, Croteam developers have been researching > this. > I'm not sure if the driver can ever give a guarantee of the exact time a flip occurs. What we have control over with our HW is frame duration. Are Croteam devs trying to predict render times? I'm not sure how that would work. We've had bad experience in the past with games that try to do framepacing as that's usually not accurate and tends to lead to more problems than benefits. Harry > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
