On Thu, Apr 05, 2018 at 11:10:03AM +0000, Alexey Brodkin wrote: > Hi Daniel, Lucas, > > On Thu, 2018-04-05 at 12:59 +0200, Daniel Vetter wrote: > > On Thu, Apr 5, 2018 at 12:29 PM, Lucas Stach <l.stach@xxxxxxxxxxxxxx> wrote: > > > Am Donnerstag, den 05.04.2018, 11:32 +0200 schrieb Daniel Vetter: > > > > On Thu, Apr 5, 2018 at 9:16 AM, Alexey Brodkin > > > > <Alexey.Brodkin@xxxxxxxxxxxx> wrote: > > > > > Hi Daniel, > > > > > > > > > > On Thu, 2018-04-05 at 08:18 +0200, Daniel Vetter wrote: > > > > > > On Wed, Apr 4, 2018 at 10:06 PM, Alexey Brodkin > > > > > > <Alexey.Brodkin@xxxxxxxxxxxx> wrote: > > > > > > > Hello, > > > > > > > > > > > > > > We're trying to use DisplayLink USB2-to-HDMI adapter to render > > > > > > > GPU-accelerated graphics. > > > > > > > Hardware setup is as simple as a devboard + DisplayLink > > > > > > > adapter. > > > > > > > Devboards we use for this experiment are: > > > > > > > * Wandboard Quad (based on IMX6 SoC with Vivante GPU) or > > > > > > > * HSDK (based on Synopsys ARC HS38 SoC with Vivante GPU as > > > > > > > well) > > > > > > > > > > > > > > I'm sure any other board with DRM supported GPU will work, > > > > > > > those we just used > > > > > > > as the very recent Linux kernels could be easily run on them > > > > > > > both. > > > > > > > > > > > > > > Basically the problem is UDL needs to be explicitly notified > > > > > > > about new data > > > > > > > to be rendered on the screen compared to typical bit-streamers > > > > > > > that infinitely > > > > > > > scan a dedicated buffer in memory. > > > > > > > > > > > > > > In case of UDL there're just 2 ways for this notification: > > > > > > > 1) DRM_IOCTL_MODE_PAGE_FLIP that calls drm_crtc_funcs- > > > > > > > > page_flip() > > > > > > > > > > > > > > 2) DRM_IOCTL_MODE_DIRTYFB that calls drm_framebuffer_funcs- > > > > > > > > dirty() > > > > > > > > > > > > > > But neither of IOCTLs happen when we run Xserver with xf86- > > > > > > > video-armada driver > > > > > > > (see https://urldefense.proofpoint.com/v2/url?u=http-3A__git.ar > > > > > > > m.linux.org.uk_cgit_xf86-2Dvideo-2Darmada.git_log_-3Fh- > > > > > > > 3Dunstable-2Ddevel&d=DwIBaQ&; > > > > > > > c=DPL6_X_6JkXFx7AXWqB0tg&r=lqdeeSSEes0GFDDl656eViXO7breS55ytWkh > > > > > > > pk5R81I&m=oEAlP64L9vkuUs_k3kGwwwlN1WJbDMJbCo0uDhwKwwk&s=3ZHj- > > > > > > > 6JXZBLSTWg_4KMnL0VNi7z8c0RxHzj2U5ywVIw&e=). > > > > > > > > > > > > > > Is it something missing in Xserver or in UDL driver? > > > > > > > > > > > > Use the -modesetting driverr for UDL, that one works correctly. > > > > > > > > > > If you're talking about "modesetting" driver of Xserver [1] then > > > > > indeed > > > > > picture is displayed on the screen. But there I guess won't be any > > > > > 3D acceleration. > > > > > > > > > > At least that's what was suggested to me earlier here [2] by Lucas: > > > > > ---------------------------->8--------------------------- > > > > > For 3D acceleration to work under X you need the etnaviv specific > > > > > DDX > > > > > driver, which can be found here: > > > > > > > > > > https://urldefense.proofpoint.com/v2/url?u=http-3A__git.arm.linux.org.uk_cgit_xf86-2Dvideo-2Darmada.git_log_-3Fh-3Dunsta&d=DwIBaQ&c=DPL6_X_6Jk > > > > > XFx7AXWqB0tg&r=lqdeeSSEes0GFDDl656eViXO7breS55ytWkhpk5R81I&m=FleDFAQb2lBcZk5DMld7qpeSrB5Srsb4XPQecA5BPvU&s=YUzMQWe3lpC_pjGqRjb4MvRYh16ZBbealqf > > > > > rywlqjKE&e= > > > > > ble-devel > > > > > > > > You definitely want to use -modesetting for UDL. And I thought with > > > > glamour and the corresponding mesa work you should also get > > > > accelaration. Insisting that you must use a driver-specific ddx is > > > > broken, the world doesn't work like that anymore. > > > > > > On etnaviv the world definitely still works like this. The etnaviv DDX > > > uses the dedicated 2D hardware of the Vivante GPUs, which is much > > > faster and efficient than going through Glamor. > > > Especially since almost all X accel operations are done on linear > > > buffers, while the 3D GPU can only ever do tiled on both sampler and > > > render, where some multi-pipe 3D cores can't even read the tiling they > > > write out. So Glamor is an endless copy fest using the resolve engine > > > on those. > > > > Ah right, I've forgotten about the vivante 2d cores again. > > > > > If using etnaviv with UDL is a use-case that need to be supported, one > > > would need to port the UDL specifics from -modesetting to the -armada > > > DDX. > > > > I don't think this makes sense. > > I'm not really sure it has something to do with Etnaviv in particular. > Given UDL might be attached to any board with any GPU that would mean we'd > need to add those "UDL specifics from -modesetting" in all xf86-video-drivers, > right? X server supports multiple drivers (for different devices) in parallel. You should be using armada for the imx-drm thing, and modesetting for udl. And through the magic of prime it should even figure out that the device > > > > Lucas, can you pls clarify? Also, why does -armada bind against all > > > > kms drivers, that's probaly too much. > > > > > > I think that's a local modification done by Alexey. The armada driver > > > only binds to armada and imx-drm by default. > > Actually it all magically works without any modifications. > I just start X with the following xorg.conf [1]: > ------------------------>8-------------------------- > Section "Device" > Identifier "Driver0" > Screen 0 > Driver "armada" > EndSection > ------------------------>8-------------------------- > > In fact in case of "kmscube" I had to trick Mesa like that: > ------------------------>8-------------------------- > export MESA_LOADER_DRIVER_OVERRIDE=imx-drm Yeah this shouldn't be necessary at all. > ------------------------>8-------------------------- > And then UDL out works perfectly fine (that's because "kmscube" > explicitly calls drmModePageFlip()). > > As for Xserver nothing special was done. > > [1] http://git.arm.linux.org.uk/cgit/xf86-video-armada.git/tree/conf/xorg-sample.conf?h=unstable-devel xorg.log is probably more interesting. No idea whether your Xorg.conf snippet is needed for armada or not. -Daniel -- Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
