On Wed, Apr 04, 2018 at 06:50:16PM +0300, Ville Syrjälä wrote:
> On Fri, Mar 30, 2018 at 04:26:53PM +0200, Hans de Goede wrote:
> > Hi,
> >
> > On 30-03-18 15:25, Hans de Goede wrote:
> > > Hi,
> > >
> > > On 30-03-18 14:44, Chris Wilson wrote:
> > >> Quoting Hans de Goede (2018-03-30 13:37:40)
> > >>> Hi,
> > >>>
> > >>> On 30-03-18 14:30, Chris Wilson wrote:
> > >>>> Quoting Hans de Goede (2018-03-30 13:27:15)
> > >>>>> Before this commit the WaSkipStolenMemoryFirstPage workaround code was
> > >>>>> skipping the first 4k by passing 4096 as start of the address range passed
> > >>>>> to drm_mm_init(). This means that calling drm_mm_reserve_node() to try and
> > >>>>> reserve the firmware framebuffer so that we can inherit it would always
> > >>>>> fail, as the firmware framebuffer starts at address 0.
> > >>>>>
> > >>>>> Commit d43537610470 ("drm/i915: skip the first 4k of stolen memory on
> > >>>>> everything >= gen8") says in its commit message: "This is confirmed to fix
> > >>>>> Skylake screen flickering issues (probably caused by the fact that we
> > >>>>> initialized a ring in the first page of stolen, but I didn't 100% confirm
> > >>>>> this theory)."
> > >>>>>
> > >>>>> Which suggests that it is safe to use the first page for a linear
> > >>>>> framebuffer as the firmware is doing.
> > >>>>>
> > >>>>> This commit always passes 0 as start to drm_mm_init() and works around
> > >>>>> WaSkipStolenMemoryFirstPage in i915_gem_stolen_insert_node_in_range()
> > >>>>> by insuring the start address passed by to drm_mm_insert_node_in_range()
> > >>>>> is always 4k or more. All entry points to i915_gem_stolen.c go through
> > >>>>> i915_gem_stolen_insert_node_in_range(), so that any newly allocated
> > >>>>> objects such as ring-buffers will not be allocated in the first 4k.
> > >>>>>
> > >>>>> The one exception is i915_gem_object_create_stolen_for_preallocated()
> > >>>>> which directly calls drm_mm_reserve_node() which now will be able to
> > >>>>> use the first 4k.
> > >>>>>
> > >>>>> This fixes the i915 driver no longer being able to inherit the firmware
> > >>>>> framebuffer on gen8+, which fixes the video output changing from the
> > >>>>> vendor logo to a black screen as soon as the i915 driver is loaded
> > >>>>> (on systems without fbcon).
> > >>>>
> > >>>> We've been told by the HW guys not to use the first page. (That's my
> > >>>> understanding from every time this gets questioned.)
> > >>>
> > >>> Yet the GOP is happily using the first page. I think we may need to make
> > >>> a difference here between the GPU not using the first page and the
> > >>> display engine/pipeline not using the first page. Note that my patch
> > >>> only influences the inheriting of the initial framebuffer as allocated
> > >>> by the GOP. It does not influence any other allocations from the
> > >>> reserved range, those will still all avoid the first page.
> > >>>
> > >>> Without this patch fastboot / flickerfree support is essentially broken
> > >>> on any gen8+ hardware given that one of the goals of atomic is to be
> > >>> able to do flickerfree transitions I think that this warrants a closer
> > >>> look then just simply saying never use the first page.
> > >>
> > >> The concern is what else (i.e. nothing that we allocated ourselves) that
> > >> may be in the first page...
> > >
> > > Given that the GOP has put its framebuffer there at least at boot there
> > > is nothing there, otherwise it would show up on the display.
> > >
> > > We have a whole bunch of code to inherit the BIOS fb in intel_display.c
> > > and AFAIK that code is there because this inheriting the BIOS fb is
> > > deemed an important feature. So I'm not happy at all with the handwavy
> > > best to not touch it answer I'm getting to this patch.
> > >
> > > Unless there are some clear answer from the hardware folks which specifically
> > > say we cannot put a framebuffer there (and then why is the GOP doing it?)
> > > then I believe that the best way forward here is to get various people to
> > > test with this patch and the best way to do that is probably to put it
> > > in next. Note I deliberately did not add a Cc stable.
> >
> > To elaborate on this, the excluding of the first 4k of the stolen memory
> > region causes intel_alloc_initial_plane_obj() from intel_display.c to fail,
> > which in turn causes intel_find_initial_plane_obj() to call
> > intel_plane_disable_noatomic(intel_crtc, intel_plane); which temporarily
> > completely turns off the display which leads to a very ugly flickering
> > of the display at boot (as well as replacing the vendor logo with a
> > black screen).
> >
> > I think we can all agree that this behavior is undesirable and even a
> > regression in behavior caused by the fix to exclude the first 4k.
> >
> > Chris, if my patch is not an acceptable way to fix this, then how do you
> > suggest that we fix this?
> >
> > Digging a bit deeper I found this:
> >
> > https://01.org/sites/default/files/documentation/intel-gfx-prm-osrc-kbl-vol16-workarounds.pdf
> >
> > Which says:
> >
> > "WaSkipStolenMemoryFirstPage:
> >
> > WA to skip the first page of stolen
> > memory due to sporadic HW write on *CS Idle"
> >
> > And also about FBC:
> >
> > "First line of FBC getting corrupted when FBC
> > compressed frame buffer offset is programmed to
> > zero. Command streamers are doing flush writes to
> > base of stolen.
> > WA: New restriction to program FBC compressed
> > frame buffer offset to at least 4KB."
> >
> > So using the first 4kB for the *framebuffer* as done by the GOP will
> > not cause any major problems (freezes, hangs, etc.), and commit
> > d43537610470 ("drm/i915: skip the first 4k of stolen memory on
> > everything >= gen8") was correct in deducing that the problem was
> > likely that some *vital* information was being stored i the first 4k
> > and that go overwritten.
> >
> > But the contents of the (first lines of) the framebuffer may become
> > corrupted once we actually start using the command-streamers, which
> > is still very much not wanted.
> >
> > In practice Xorg or Wayland will likely have setup another framebuffer
> > by the time the command-streamers will start to get used.
> >
> > Alternatively we could start with inheriting the BIOS framebuffer
> > (as my patch allows) so that we don't get the flicker and then soon
> > afterwards atomically transit to a new framebuffer (which should
> > contain a copy of the BIOS fb contents) at a different location.
>
> What I suggested long ago was to copy just the first page and adjust the
> sg list. But I'm not sure if our stolen gem code would be happy with an
> sg list with two entries instead of one.
Oh I vaguely remember the issue and this suggestion.
But looking to Hans code and explanation I believe that makes sense,
although I understand the fear of regressions :/
>
> --
> Ville Syrjälä
> Intel OTC
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
