On 04/04/18 12:51, Laurent Pinchart wrote: > Hi Tomi, > > On Wednesday, 4 April 2018 10:37:05 EEST Tomi Valkeinen wrote: >> On 04/04/18 00:11, Laurent Pinchart wrote: >>> I assume access to DMM-mapped buffers to be way more frequent than access >>> to the DMM registers. If that's the case, this partial workaround should >>> only slightly lower the probability of system lock-up. Do you have plans >>> to implement a workaround that will fix the problem completely ? >> >> CPU only accesses memory via DMM when using TILER 2D buffers, which are >> not officially supported. For non-2D, the pages are mapped directly to >> the CPU without DMM in between. > > What is the DMM used for with non-2D then ? Does it need to be setup at all ? It creates a contiguous view of memory for IPs without IOMMUs, like DSS. Tomi -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
