Implements a interface for single burst read of data that is larger
than 512 Bytes through gmbus.
HDCP2.2 spec expects HDCP2.2 transmitter to read 522Bytes of HDCP
receiver certificates in single burst read. On gmbus, to read more
than 511Bytes, HW provides a workaround for burst read.
This patch passes the burst read request through gmbus read functions.
And implements the sequence of enabling and disabling the burst read.
v2:
No Changes.
v3:
No Changes.
Signed-off-by: Ramalingam C <ramalingam.c@xxxxxxxxx>
---
drivers/gpu/drm/i915/i915_drv.h | 2 +
drivers/gpu/drm/i915/i915_reg.h | 3 +
drivers/gpu/drm/i915/intel_i2c.c | 124 +++++++++++++++++++++++++++++++++------
3 files changed, 112 insertions(+), 17 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 6e740f6fe33f..72534a1e544b 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -3688,6 +3688,8 @@ extern void intel_teardown_gmbus(struct drm_i915_private *dev_priv);
extern bool intel_gmbus_is_valid_pin(struct drm_i915_private *dev_priv,
unsigned int pin);
extern int intel_gmbus_output_aksv(struct i2c_adapter *adapter);
+extern int intel_gmbus_burst_read(struct i2c_adapter *adapter,
+ unsigned int offset, void *buf, size_t size);
extern struct i2c_adapter *
intel_gmbus_get_adapter(struct drm_i915_private *dev_priv, unsigned int pin);
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index f04ad3c15abd..56979bc4e9d8 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3123,6 +3123,7 @@ enum i915_power_well_id {
#define GMBUS_RATE_400KHZ (2<<8) /* reserved on Pineview */
#define GMBUS_RATE_1MHZ (3<<8) /* reserved on Pineview */
#define GMBUS_HOLD_EXT (1<<7) /* 300ns hold time, rsvd on Pineview */
+#define GMBUS_BYTE_CNT_OVERRIDE (1<<6)
#define GMBUS_PIN_DISABLED 0
#define GMBUS_PIN_SSC 1
#define GMBUS_PIN_VGADDC 2
@@ -3150,8 +3151,10 @@ enum i915_power_well_id {
#define GMBUS_CYCLE_WAIT (1<<25)
#define GMBUS_CYCLE_INDEX (2<<25)
#define GMBUS_CYCLE_STOP (4<<25)
+#define GMBUS_CYCLE_MASK (7<<25)
#define GMBUS_BYTE_COUNT_SHIFT 16
#define GMBUS_BYTE_COUNT_MAX 256U
+#define GMBUS_BYTE_COUNT_HW_MAX 511U
#define GMBUS_SLAVE_INDEX_SHIFT 8
#define GMBUS_SLAVE_ADDR_SHIFT 1
#define GMBUS_SLAVE_READ (1<<0)
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index e6875509bcd9..dcb2be0d54ee 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -364,21 +364,30 @@ gmbus_wait_idle(struct drm_i915_private *dev_priv)
static int
gmbus_xfer_read_chunk(struct drm_i915_private *dev_priv,
unsigned short addr, u8 *buf, unsigned int len,
- u32 gmbus1_index)
+ u32 gmbus1_index, bool burst_read)
{
+ unsigned int size = len;
+ int ret;
+
+ if (burst_read) {
+ /* Seq to enable Burst Read */
+ I915_WRITE_FW(GMBUS0, (I915_READ_FW(GMBUS0) |
+ GMBUS_BYTE_CNT_OVERRIDE));
+ size = GMBUS_BYTE_COUNT_HW_MAX;
+ }
+
I915_WRITE_FW(GMBUS1,
gmbus1_index |
GMBUS_CYCLE_WAIT |
- (len << GMBUS_BYTE_COUNT_SHIFT) |
+ (size << GMBUS_BYTE_COUNT_SHIFT) |
(addr << GMBUS_SLAVE_ADDR_SHIFT) |
GMBUS_SLAVE_READ | GMBUS_SW_RDY);
while (len) {
- int ret;
u32 val, loop = 0;
ret = gmbus_wait(dev_priv, GMBUS_HW_RDY, GMBUS_HW_RDY_EN);
if (ret)
- return ret;
+ goto exit;
val = I915_READ_FW(GMBUS3);
do {
@@ -387,12 +396,29 @@ gmbus_xfer_read_chunk(struct drm_i915_private *dev_priv,
} while (--len && ++loop < 4);
}
- return 0;
+exit:
+ if (burst_read) {
+
+ /* Seq to disable the Burst Read */
+ I915_WRITE_FW(GMBUS0, (I915_READ_FW(GMBUS0) &
+ ~GMBUS_BYTE_CNT_OVERRIDE));
+ I915_WRITE_FW(GMBUS1, (I915_READ_FW(GMBUS1) &
+ ~GMBUS_CYCLE_MASK) | GMBUS_CYCLE_STOP);
+
+ /*
+ * On Burst read disable, GMBUS need more time to settle
+ * down to Idle State.
+ */
+ ret = intel_wait_for_register_fw(dev_priv, GMBUS2,
+ GMBUS_ACTIVE, 0, 50);
+ }
+
+ return ret;
}
static int
gmbus_xfer_read(struct drm_i915_private *dev_priv, struct i2c_msg *msg,
- u32 gmbus1_index)
+ u32 gmbus1_index, bool burst_read)
{
u8 *buf = msg->buf;
unsigned int rx_size = msg->len;
@@ -400,10 +426,13 @@ gmbus_xfer_read(struct drm_i915_private *dev_priv, struct i2c_msg *msg,
int ret;
do {
- len = min(rx_size, GMBUS_BYTE_COUNT_MAX);
+ if (burst_read)
+ len = rx_size;
+ else
+ len = min(rx_size, GMBUS_BYTE_COUNT_MAX);
- ret = gmbus_xfer_read_chunk(dev_priv, msg->addr,
- buf, len, gmbus1_index);
+ ret = gmbus_xfer_read_chunk(dev_priv, msg->addr, buf, len,
+ gmbus1_index, burst_read);
if (ret)
return ret;
@@ -491,7 +520,8 @@ gmbus_is_index_xfer(struct i2c_msg *msgs, int i, int num)
}
static int
-gmbus_index_xfer(struct drm_i915_private *dev_priv, struct i2c_msg *msgs)
+gmbus_index_xfer(struct drm_i915_private *dev_priv, struct i2c_msg *msgs,
+ bool burst_read)
{
u32 gmbus1_index = 0;
u32 gmbus5 = 0;
@@ -509,7 +539,8 @@ gmbus_index_xfer(struct drm_i915_private *dev_priv, struct i2c_msg *msgs)
I915_WRITE_FW(GMBUS5, gmbus5);
if (msgs[1].flags & I2C_M_RD)
- ret = gmbus_xfer_read(dev_priv, &msgs[1], gmbus1_index);
+ ret = gmbus_xfer_read(dev_priv, &msgs[1],
+ gmbus1_index, burst_read);
else
ret = gmbus_xfer_write(dev_priv, &msgs[1], gmbus1_index);
@@ -522,7 +553,7 @@ gmbus_index_xfer(struct drm_i915_private *dev_priv, struct i2c_msg *msgs)
static int
do_gmbus_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num,
- u32 gmbus0_source)
+ u32 gmbus0_source, bool burst_read)
{
struct intel_gmbus *bus = container_of(adapter,
struct intel_gmbus,
@@ -544,15 +575,20 @@ do_gmbus_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num,
for (; i < num; i += inc) {
inc = 1;
if (gmbus_is_index_xfer(msgs, i, num)) {
- ret = gmbus_index_xfer(dev_priv, &msgs[i]);
+ ret = gmbus_index_xfer(dev_priv, &msgs[i], burst_read);
inc = 2; /* an index transmission is two msgs */
} else if (msgs[i].flags & I2C_M_RD) {
- ret = gmbus_xfer_read(dev_priv, &msgs[i], 0);
+ ret = gmbus_xfer_read(dev_priv, &msgs[i],
+ 0, burst_read);
} else {
ret = gmbus_xfer_write(dev_priv, &msgs[i], 0);
}
- if (!ret)
+ /*
+ * Burst read Sequence ends with STOP. So Dont expect
+ * HW wait phase.
+ */
+ if (!ret && !burst_read)
ret = gmbus_wait(dev_priv,
GMBUS_HW_WAIT_PHASE, GMBUS_HW_WAIT_EN);
if (ret == -ETIMEDOUT)
@@ -664,7 +700,7 @@ gmbus_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num)
if (ret < 0)
bus->force_bit &= ~GMBUS_FORCE_BIT_RETRY;
} else {
- ret = do_gmbus_xfer(adapter, msgs, num, 0);
+ ret = do_gmbus_xfer(adapter, msgs, num, 0, false);
if (ret == -EAGAIN)
bus->force_bit |= GMBUS_FORCE_BIT_RETRY;
}
@@ -705,7 +741,8 @@ int intel_gmbus_output_aksv(struct i2c_adapter *adapter)
* pass the i2c command, and tell GMBUS to use the HW-provided value
* instead of sourcing GMBUS3 for the data.
*/
- ret = do_gmbus_xfer(adapter, msgs, ARRAY_SIZE(msgs), GMBUS_AKSV_SELECT);
+ ret = do_gmbus_xfer(adapter, msgs, ARRAY_SIZE(msgs),
+ GMBUS_AKSV_SELECT, false);
mutex_unlock(&dev_priv->gmbus_mutex);
intel_display_power_put(dev_priv, POWER_DOMAIN_GMBUS);
@@ -713,6 +750,59 @@ int intel_gmbus_output_aksv(struct i2c_adapter *adapter)
return ret;
}
+static inline
+bool intel_gmbus_burst_read_supported(struct drm_i915_private *dev_priv)
+{
+ if (INTEL_GEN(dev_priv) > 10 || IS_GEMINILAKE(dev_priv) ||
+ IS_KABYLAKE(dev_priv))
+ return true;
+ return false;
+}
+
+int intel_gmbus_burst_read(struct i2c_adapter *adapter, unsigned int offset,
+ void *buf, size_t size)
+{
+ struct intel_gmbus *bus = container_of(adapter, struct intel_gmbus,
+ adapter);
+ struct drm_i915_private *dev_priv = bus->dev_priv;
+ int ret;
+ u8 start = offset & 0xff;
+ struct i2c_msg msgs[] = {
+ {
+ .addr = DRM_HDCP_DDC_ADDR,
+ .flags = 0,
+ .len = 1,
+ .buf = &start,
+ },
+ {
+ .addr = DRM_HDCP_DDC_ADDR,
+ .flags = I2C_M_RD,
+ .len = size,
+ .buf = buf,
+ }
+ };
+
+ if (!intel_gmbus_burst_read_supported(dev_priv))
+ return -EINVAL;
+
+ intel_display_power_get(dev_priv, POWER_DOMAIN_GMBUS);
+ mutex_lock(&dev_priv->gmbus_mutex);
+
+ /*
+ * In order to read the complete length(More than GMBus Limit) of data,
+ * in burst mode, implement the Workaround supported in HW.
+ */
+ ret = do_gmbus_xfer(adapter, msgs, ARRAY_SIZE(msgs), 0, true);
+
+ mutex_unlock(&dev_priv->gmbus_mutex);
+ intel_display_power_put(dev_priv, POWER_DOMAIN_GMBUS);
+
+ if (ret == ARRAY_SIZE(msgs))
+ return 0;
+
+ return ret >= 0 ? -EIO : ret;
+}
+
static u32 gmbus_func(struct i2c_adapter *adapter)
{
return i2c_bit_algo.functionality(adapter) &
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
