On 22/03/18 15:42, Peter Ujfalusi wrote:
> From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
>
> Errata i878 says that MPU should not be used to access RAM and DMM at
> the same time. As it's not possible to prevent MPU accessing RAM, we
> need to access DMM via a proxy.
>
> This patch changes DMM driver to access DMM registers via sDMA. Instead
> of doing a normal readl/writel call to read/write a register, we use
> sDMA to copy 4 bytes from/to the DMM registers.
>
> This patch provides only a partial workaround for i878, as not only DMM
> register reads/writes are affected, but also accesses to the DMM mapped
> buffers (framebuffers, usually).
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
> ---
> drivers/gpu/drm/omapdrm/omap_dmm_priv.h | 8 ++
> drivers/gpu/drm/omapdrm/omap_dmm_tiler.c | 153 ++++++++++++++++++++++++++++++-
> 2 files changed, 159 insertions(+), 2 deletions(-)
>
> + dmm->wa_dma_chan = dma_request_channel(mask, NULL, NULL);
> + if (!dmm->wa_dma_chan) {
> + dma_free_coherent(dmm->dev, 4, dmm->wa_dma_data, dmm->wa_dma_handle);
This and the other free below should use sizeof(u32) as the alloc does.
And I guess device_prep_dma_memcpy() too. Perhaps a #define would be
best here. DMM_REG_SIZE? I can do this change when applying, if you agree.
Tomi
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
