Hi Kieran,
On Wednesday, 28 March 2018 17:43:13 EEST Kieran Bingham wrote:
> On 26/02/18 21:45, Laurent Pinchart wrote:
> > The DRM pipeline setup code used at atomic commit time is similar to the
> > setup code used when enabling the pipeline. Move it to a separate
> > function in order to share it.
> >
> > Signed-off-by: Laurent Pinchart
> > <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
>
> Assuming no hidden secret code addition in this code move that I haven't
> seen..
>
> Only a minor nit below asking if the function should be pluralised (_inputs,
> rather than _input)
I'll fix that in v2, thanks.
> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
>
> > ---
> >
> > drivers/media/platform/vsp1/vsp1_drm.c | 347
> > +++++++++++++++++---------------- 1 file changed, 180 insertions(+), 167
> > deletions(-)
> >
> > diff --git a/drivers/media/platform/vsp1/vsp1_drm.c
> > b/drivers/media/platform/vsp1/vsp1_drm.c index 9a043a915c0b..7bf697ba7969
> > 100644
> > --- a/drivers/media/platform/vsp1/vsp1_drm.c
> > +++ b/drivers/media/platform/vsp1/vsp1_drm.c
> > @@ -46,6 +46,185 @@ static void vsp1_du_pipeline_frame_end(struct
> > vsp1_pipeline *pipe,>
> > * Pipeline Configuration
> > */
> >
> > +/* Setup one RPF and the connected BRU sink pad. */
> > +static int vsp1_du_pipeline_setup_rpf(struct vsp1_device *vsp1,
> > + struct vsp1_pipeline *pipe,
> > + struct vsp1_rwpf *rpf,
> > + unsigned int bru_input)
> > +{
> > + struct v4l2_subdev_selection sel;
> > + struct v4l2_subdev_format format;
> > + const struct v4l2_rect *crop;
> > + int ret;
> > +
> > + /*
> > + * Configure the format on the RPF sink pad and propagate it up to the
> > + * BRU sink pad.
> > + */
> > + crop = &vsp1->drm->inputs[rpf->entity.index].crop;
> > +
> > + memset(&format, 0, sizeof(format));
> > + format.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> > + format.pad = RWPF_PAD_SINK;
> > + format.format.width = crop->width + crop->left;
> > + format.format.height = crop->height + crop->top;
> > + format.format.code = rpf->fmtinfo->mbus;
> > + format.format.field = V4L2_FIELD_NONE;
> > +
> > + ret = v4l2_subdev_call(&rpf->entity.subdev, pad, set_fmt, NULL,
> > + &format);
> > + if (ret < 0)
> > + return ret;
> > +
> > + dev_dbg(vsp1->dev,
> > + "%s: set format %ux%u (%x) on RPF%u sink\n",
> > + __func__, format.format.width, format.format.height,
> > + format.format.code, rpf->entity.index);
> > +
> > + memset(&sel, 0, sizeof(sel));
> > + sel.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> > + sel.pad = RWPF_PAD_SINK;
> > + sel.target = V4L2_SEL_TGT_CROP;
> > + sel.r = *crop;
> > +
> > + ret = v4l2_subdev_call(&rpf->entity.subdev, pad, set_selection, NULL,
> > + &sel);
> > + if (ret < 0)
> > + return ret;
> > +
> > + dev_dbg(vsp1->dev,
> > + "%s: set selection (%u,%u)/%ux%u on RPF%u sink\n",
> > + __func__, sel.r.left, sel.r.top, sel.r.width, sel.r.height,
> > + rpf->entity.index);
> > +
> > + /*
> > + * RPF source, hardcode the format to ARGB8888 to turn on format
> > + * conversion if needed.
> > + */
> > + format.pad = RWPF_PAD_SOURCE;
> > +
> > + ret = v4l2_subdev_call(&rpf->entity.subdev, pad, get_fmt, NULL,
> > + &format);
> > + if (ret < 0)
> > + return ret;
> > +
> > + dev_dbg(vsp1->dev,
> > + "%s: got format %ux%u (%x) on RPF%u source\n",
> > + __func__, format.format.width, format.format.height,
> > + format.format.code, rpf->entity.index);
> > +
> > + format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32;
> > +
> > + ret = v4l2_subdev_call(&rpf->entity.subdev, pad, set_fmt, NULL,
> > + &format);
> > + if (ret < 0)
> > + return ret;
> > +
> > + /* BRU sink, propagate the format from the RPF source. */
> > + format.pad = bru_input;
> > +
> > + ret = v4l2_subdev_call(&pipe->bru->subdev, pad, set_fmt, NULL,
> > + &format);
> > + if (ret < 0)
> > + return ret;
> > +
> > + dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on %s pad %u\n",
> > + __func__, format.format.width, format.format.height,
> > + format.format.code, BRU_NAME(pipe->bru), format.pad);
> > +
> > + sel.pad = bru_input;
> > + sel.target = V4L2_SEL_TGT_COMPOSE;
> > + sel.r = vsp1->drm->inputs[rpf->entity.index].compose;
> > +
> > + ret = v4l2_subdev_call(&pipe->bru->subdev, pad, set_selection, NULL,
> > + &sel);
> > + if (ret < 0)
> > + return ret;
> > +
> > + dev_dbg(vsp1->dev, "%s: set selection (%u,%u)/%ux%u on %s pad %u\n",
> > + __func__, sel.r.left, sel.r.top, sel.r.width, sel.r.height,
> > + BRU_NAME(pipe->bru), sel.pad);
> > +
> > + return 0;
> > +}
> > +
> > +static unsigned int rpf_zpos(struct vsp1_device *vsp1, struct vsp1_rwpf
> > *rpf) +{
> > + return vsp1->drm->inputs[rpf->entity.index].zpos;
> > +}
> > +
> > +/* Setup the input side of the pipeline (RPFs and BRU sink pads). */
> > +static int vsp1_du_pipeline_setup_input(struct vsp1_device *vsp1,
>
> Minor nit - shouldn't this be _setup_inputs(..)
> as we could have multiple inputs, and it configures them all.
>
> > + struct vsp1_pipeline *pipe)
> > +{
> > + struct vsp1_rwpf *inputs[VSP1_MAX_RPF] = { NULL, };
> > + struct vsp1_bru *bru = to_bru(&pipe->bru->subdev);
> > + unsigned int i;
> > + int ret;
> > +
> > + /* Count the number of enabled inputs and sort them by Z-order. */
> > + pipe->num_inputs = 0;
> > +
> > + for (i = 0; i < vsp1->info->rpf_count; ++i) {
> > + struct vsp1_rwpf *rpf = vsp1->rpf[i];
> > + unsigned int j;
> > +
> > + /*
> > + * Make sure we don't accept more inputs than the hardware can
> > + * handle. This is a temporary fix to avoid display stall, we
> > + * need to instead allocate the BRU or BRS to display pipelines
> > + * dynamically based on the number of planes they each use.
> > + */
> > + if (pipe->num_inputs >= pipe->bru->source_pad)
> > + pipe->inputs[i] = NULL;
> > +
> > + if (!pipe->inputs[i])
> > + continue;
> > +
> > + /* Insert the RPF in the sorted RPFs array. */
> > + for (j = pipe->num_inputs++; j > 0; --j) {
> > + if (rpf_zpos(vsp1, inputs[j-1]) <= rpf_zpos(vsp1, rpf))
> > + break;
> > + inputs[j] = inputs[j-1];
> > + }
> > +
> > + inputs[j] = rpf;
> > + }
> > +
> > + /* Setup the RPF input pipeline for every enabled input. */
> > + for (i = 0; i < pipe->bru->source_pad; ++i) {
> > + struct vsp1_rwpf *rpf = inputs[i];
> > +
> > + if (!rpf) {
> > + bru->inputs[i].rpf = NULL;
> > + continue;
> > + }
> > +
> > + if (!rpf->entity.pipe) {
> > + rpf->entity.pipe = pipe;
> > + list_add_tail(&rpf->entity.list_pipe, &pipe->entities);
> > + }
> > +
> > + bru->inputs[i].rpf = rpf;
> > + rpf->bru_input = i;
> > + rpf->entity.sink = pipe->bru;
> > + rpf->entity.sink_pad = i;
> > +
> > + dev_dbg(vsp1->dev, "%s: connecting RPF.%u to %s:%u\n",
> > + __func__, rpf->entity.index, BRU_NAME(pipe->bru), i);
> > +
> > + ret = vsp1_du_pipeline_setup_rpf(vsp1, pipe, rpf, i);
> > + if (ret < 0) {
> > + dev_err(vsp1->dev,
> > + "%s: failed to setup RPF.%u\n",
> > + __func__, rpf->entity.index);
> > + return ret;
> > + }
> > + }
> > +
> > + return 0;
> > +}
> > +
> >
> > /* Configure all entities in the pipeline. */
> > static void vsp1_du_pipeline_configure(struct vsp1_pipeline *pipe)
> > {
> >
> > @@ -396,111 +575,6 @@ int vsp1_du_atomic_update(struct device *dev,
> > unsigned int pipe_index,>
> > }
> > EXPORT_SYMBOL_GPL(vsp1_du_atomic_update);
> >
> > -static int vsp1_du_setup_rpf_pipe(struct vsp1_device *vsp1,
> > - struct vsp1_pipeline *pipe,
> > - struct vsp1_rwpf *rpf, unsigned int bru_input)
> > -{
> > - struct v4l2_subdev_selection sel;
> > - struct v4l2_subdev_format format;
> > - const struct v4l2_rect *crop;
> > - int ret;
> > -
> > - /*
> > - * Configure the format on the RPF sink pad and propagate it up to the
> > - * BRU sink pad.
> > - */
> > - crop = &vsp1->drm->inputs[rpf->entity.index].crop;
> > -
> > - memset(&format, 0, sizeof(format));
> > - format.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> > - format.pad = RWPF_PAD_SINK;
> > - format.format.width = crop->width + crop->left;
> > - format.format.height = crop->height + crop->top;
> > - format.format.code = rpf->fmtinfo->mbus;
> > - format.format.field = V4L2_FIELD_NONE;
> > -
> > - ret = v4l2_subdev_call(&rpf->entity.subdev, pad, set_fmt, NULL,
> > - &format);
> > - if (ret < 0)
> > - return ret;
> > -
> > - dev_dbg(vsp1->dev,
> > - "%s: set format %ux%u (%x) on RPF%u sink\n",
> > - __func__, format.format.width, format.format.height,
> > - format.format.code, rpf->entity.index);
> > -
> > - memset(&sel, 0, sizeof(sel));
> > - sel.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> > - sel.pad = RWPF_PAD_SINK;
> > - sel.target = V4L2_SEL_TGT_CROP;
> > - sel.r = *crop;
> > -
> > - ret = v4l2_subdev_call(&rpf->entity.subdev, pad, set_selection, NULL,
> > - &sel);
> > - if (ret < 0)
> > - return ret;
> > -
> > - dev_dbg(vsp1->dev,
> > - "%s: set selection (%u,%u)/%ux%u on RPF%u sink\n",
> > - __func__, sel.r.left, sel.r.top, sel.r.width, sel.r.height,
> > - rpf->entity.index);
> > -
> > - /*
> > - * RPF source, hardcode the format to ARGB8888 to turn on format
> > - * conversion if needed.
> > - */
> > - format.pad = RWPF_PAD_SOURCE;
> > -
> > - ret = v4l2_subdev_call(&rpf->entity.subdev, pad, get_fmt, NULL,
> > - &format);
> > - if (ret < 0)
> > - return ret;
> > -
> > - dev_dbg(vsp1->dev,
> > - "%s: got format %ux%u (%x) on RPF%u source\n",
> > - __func__, format.format.width, format.format.height,
> > - format.format.code, rpf->entity.index);
> > -
> > - format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32;
> > -
> > - ret = v4l2_subdev_call(&rpf->entity.subdev, pad, set_fmt, NULL,
> > - &format);
> > - if (ret < 0)
> > - return ret;
> > -
> > - /* BRU sink, propagate the format from the RPF source. */
> > - format.pad = bru_input;
> > -
> > - ret = v4l2_subdev_call(&pipe->bru->subdev, pad, set_fmt, NULL,
> > - &format);
> > - if (ret < 0)
> > - return ret;
> > -
> > - dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on %s pad %u\n",
> > - __func__, format.format.width, format.format.height,
> > - format.format.code, BRU_NAME(pipe->bru), format.pad);
> > -
> > - sel.pad = bru_input;
> > - sel.target = V4L2_SEL_TGT_COMPOSE;
> > - sel.r = vsp1->drm->inputs[rpf->entity.index].compose;
> > -
> > - ret = v4l2_subdev_call(&pipe->bru->subdev, pad, set_selection, NULL,
> > - &sel);
> > - if (ret < 0)
> > - return ret;
> > -
> > - dev_dbg(vsp1->dev, "%s: set selection (%u,%u)/%ux%u on %s pad %u\n",
> > - __func__, sel.r.left, sel.r.top, sel.r.width, sel.r.height,
> > - BRU_NAME(pipe->bru), sel.pad);
> > -
> > - return 0;
> > -}
> > -
> > -static unsigned int rpf_zpos(struct vsp1_device *vsp1, struct vsp1_rwpf
> > *rpf) -{
> > - return vsp1->drm->inputs[rpf->entity.index].zpos;
> > -}
> > -
> >
> > /**
> >
> > * vsp1_du_atomic_flush - Commit an atomic update
> > * @dev: the VSP device
> >
> > @@ -511,69 +585,8 @@ void vsp1_du_atomic_flush(struct device *dev,
> > unsigned int pipe_index)>
> > struct vsp1_device *vsp1 = dev_get_drvdata(dev);
> > struct vsp1_drm_pipeline *drm_pipe = &vsp1->drm->pipe[pipe_index];
> > struct vsp1_pipeline *pipe = &drm_pipe->pipe;
> >
> > - struct vsp1_rwpf *inputs[VSP1_MAX_RPF] = { NULL, };
> > - struct vsp1_bru *bru = to_bru(&pipe->bru->subdev);
> > - unsigned int i;
> > - int ret;
> > -
> > - /* Count the number of enabled inputs and sort them by Z-order. */
> > - pipe->num_inputs = 0;
> > -
> > - for (i = 0; i < vsp1->info->rpf_count; ++i) {
> > - struct vsp1_rwpf *rpf = vsp1->rpf[i];
> > - unsigned int j;
> > -
> > - /*
> > - * Make sure we don't accept more inputs than the hardware can
> > - * handle. This is a temporary fix to avoid display stall, we
> > - * need to instead allocate the BRU or BRS to display pipelines
> > - * dynamically based on the number of planes they each use.
> > - */
> > - if (pipe->num_inputs >= pipe->bru->source_pad)
> > - pipe->inputs[i] = NULL;
> > -
> > - if (!pipe->inputs[i])
> > - continue;
> > -
> > - /* Insert the RPF in the sorted RPFs array. */
> > - for (j = pipe->num_inputs++; j > 0; --j) {
> > - if (rpf_zpos(vsp1, inputs[j-1]) <= rpf_zpos(vsp1, rpf))
> > - break;
> > - inputs[j] = inputs[j-1];
> > - }
> > -
> > - inputs[j] = rpf;
> > - }
> > -
> > - /* Setup the RPF input pipeline for every enabled input. */
> > - for (i = 0; i < pipe->bru->source_pad; ++i) {
> > - struct vsp1_rwpf *rpf = inputs[i];
> > -
> > - if (!rpf) {
> > - bru->inputs[i].rpf = NULL;
> > - continue;
> > - }
> > -
> > - if (!rpf->entity.pipe) {
> > - rpf->entity.pipe = pipe;
> > - list_add_tail(&rpf->entity.list_pipe, &pipe->entities);
> > - }
> > -
> > - bru->inputs[i].rpf = rpf;
> > - rpf->bru_input = i;
> > - rpf->entity.sink = pipe->bru;
> > - rpf->entity.sink_pad = i;
> > -
> > - dev_dbg(vsp1->dev, "%s: connecting RPF.%u to %s:%u\n",
> > - __func__, rpf->entity.index, BRU_NAME(pipe->bru), i);
> > -
> > - ret = vsp1_du_setup_rpf_pipe(vsp1, pipe, rpf, i);
> > - if (ret < 0)
> > - dev_err(vsp1->dev,
> > - "%s: failed to setup RPF.%u\n",
> > - __func__, rpf->entity.index);
> > - }
> >
> > + vsp1_du_pipeline_setup_input(vsp1, pipe);
> >
> > vsp1_du_pipeline_configure(pipe);
> >
> > }
> > EXPORT_SYMBOL_GPL(vsp1_du_atomic_flush);
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
