Hi Laurent,
On 26/02/18 21:45, Laurent Pinchart wrote:
> To implement fully dynamic plane assignment to pipelines, we need to
> reassign the BRU and BRS to the DRM pipelines in the atomic commit
> handler. In preparation for this setup factor out the BRU source pad
> code and call it both at LIF setup and atomic commit time.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
Oops .. skipped one.
But this looks ok to me.
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
> ---
> drivers/media/platform/vsp1/vsp1_drm.c | 56 +++++++++++++++++++++++++++++++++-
> drivers/media/platform/vsp1/vsp1_drm.h | 5 +++
> 2 files changed, 60 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/platform/vsp1/vsp1_drm.c b/drivers/media/platform/vsp1/vsp1_drm.c
> index 7bf697ba7969..6ad8aa6c8138 100644
> --- a/drivers/media/platform/vsp1/vsp1_drm.c
> +++ b/drivers/media/platform/vsp1/vsp1_drm.c
> @@ -148,12 +148,51 @@ static int vsp1_du_pipeline_setup_rpf(struct vsp1_device *vsp1,
> return 0;
> }
>
> +/* Setup the BRU source pad. */
> +static int vsp1_du_pipeline_setup_bru(struct vsp1_device *vsp1,
> + struct vsp1_pipeline *pipe)
> +{
> + struct vsp1_drm_pipeline *drm_pipe = to_vsp1_drm_pipeline(pipe);
> + struct v4l2_subdev_format format = {
> + .which = V4L2_SUBDEV_FORMAT_ACTIVE,
> + };
> + int ret;
> +
> + /*
> + * Configure the format on the BRU source and verify that it matches the
> + * requested format. We don't set the media bus code as it is configured
> + * on the BRU sink pad 0 and propagated inside the entity, not on the
> + * source pad.
> + */
> + format.pad = pipe->bru->source_pad;
> + format.format.width = drm_pipe->width;
> + format.format.height = drm_pipe->height;
> + format.format.field = V4L2_FIELD_NONE;
> +
> + ret = v4l2_subdev_call(&pipe->bru->subdev, pad, set_fmt, NULL,
> + &format);
> + if (ret < 0)
> + return ret;
> +
> + dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on %s pad %u\n",
> + __func__, format.format.width, format.format.height,
> + format.format.code, BRU_NAME(pipe->bru), pipe->bru->source_pad);
> +
> + if (format.format.width != drm_pipe->width ||
> + format.format.height != drm_pipe->height) {
> + dev_dbg(vsp1->dev, "%s: format mismatch\n", __func__);
> + return -EPIPE;
> + }
> +
> + return 0;
> +}
> +
> static unsigned int rpf_zpos(struct vsp1_device *vsp1, struct vsp1_rwpf *rpf)
> {
> return vsp1->drm->inputs[rpf->entity.index].zpos;
> }
>
> -/* Setup the input side of the pipeline (RPFs and BRU sink pads). */
> +/* Setup the input side of the pipeline (RPFs and BRU). */
> static int vsp1_du_pipeline_setup_input(struct vsp1_device *vsp1,
> struct vsp1_pipeline *pipe)
> {
> @@ -191,6 +230,18 @@ static int vsp1_du_pipeline_setup_input(struct vsp1_device *vsp1,
> inputs[j] = rpf;
> }
>
> + /*
> + * Setup the BRU. This must be done before setting up the RPF input
> + * pipelines as the BRU sink compose rectangles depend on the BRU source
> + * format.
> + */
> + ret = vsp1_du_pipeline_setup_bru(vsp1, pipe);
> + if (ret < 0) {
> + dev_err(vsp1->dev, "%s: failed to setup %s source\n", __func__,
> + BRU_NAME(pipe->bru));
> + return ret;
> + }
> +
> /* Setup the RPF input pipeline for every enabled input. */
> for (i = 0; i < pipe->bru->source_pad; ++i) {
> struct vsp1_rwpf *rpf = inputs[i];
> @@ -355,6 +406,9 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
> return 0;
> }
>
> + drm_pipe->width = cfg->width;
> + drm_pipe->height = cfg->height;
> +
> dev_dbg(vsp1->dev, "%s: configuring LIF%u with format %ux%u\n",
> __func__, pipe_index, cfg->width, cfg->height);
>
> diff --git a/drivers/media/platform/vsp1/vsp1_drm.h b/drivers/media/platform/vsp1/vsp1_drm.h
> index 9aa19325cbe9..c8dd75ba01f6 100644
> --- a/drivers/media/platform/vsp1/vsp1_drm.h
> +++ b/drivers/media/platform/vsp1/vsp1_drm.h
> @@ -20,12 +20,17 @@
> /**
> * vsp1_drm_pipeline - State for the API exposed to the DRM driver
> * @pipe: the VSP1 pipeline used for display
> + * @width: output display width
> + * @height: output display height
> * @du_complete: frame completion callback for the DU driver (optional)
> * @du_private: data to be passed to the du_complete callback
> */
> struct vsp1_drm_pipeline {
> struct vsp1_pipeline pipe;
>
> + unsigned int width;
> + unsigned int height;
> +
> /* Frame synchronisation */
> void (*du_complete)(void *, bool);
> void *du_private;
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
