Hi,
On Fri, 2018-03-23 at 11:30 +0100, Maxime Ripard wrote:
> On Wed, Mar 21, 2018 at 04:29:01PM +0100, Paul Kocialkowski wrote:
> > The frontend supports many YUV formats as input and also contains a
> > color-space converter (CSC) block that can convert YUV input into
> > RGB output. It also allows scaling between the input and output for
> > every possible combination of supported formats.
> >
> > This adds support for all the (untiled) YUV video formats supported
> > by
> > the frontend, with associated changes in the backend and layer
> > management.
> >
> > A specific dumb GEM create function translates a hardware
> > constraint,
> > that the stride must be an even number, when allocating dumb
> > (linear)
> > buffers.
>
> This should be in a separate, potentially preliminary, patch.
Sure thing.
> > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>
> > ---
> > drivers/gpu/drm/sun4i/sun4i_backend.c | 10 +-
> > drivers/gpu/drm/sun4i/sun4i_drv.c | 11 +-
> > drivers/gpu/drm/sun4i/sun4i_drv.h | 4 +
> > drivers/gpu/drm/sun4i/sun4i_frontend.c | 234
> > ++++++++++++++++++++++++++++-----
> > drivers/gpu/drm/sun4i/sun4i_frontend.h | 48 ++++++-
> > drivers/gpu/drm/sun4i/sun4i_layer.c | 34 +++--
> > 6 files changed, 293 insertions(+), 48 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/sun4i/sun4i_backend.c
> > b/drivers/gpu/drm/sun4i/sun4i_backend.c
> > index e8af9f3cf20b..3de7f3a427c3 100644
> > --- a/drivers/gpu/drm/sun4i/sun4i_backend.c
> > +++ b/drivers/gpu/drm/sun4i/sun4i_backend.c
> > @@ -500,6 +500,11 @@ static int sun4i_backend_atomic_check(struct
> > sunxi_engine *engine,
> > layer_state->uses_frontend = true;
> > num_frontend_planes++;
> > } else {
> > + if (sun4i_format_is_yuv(fb->format-
> > >format)) {
> > + DRM_DEBUG_DRIVER("Plane FB format
> > is YUV\n");
> > + num_yuv_planes++;
> > + }
> > +
> > layer_state->uses_frontend = false;
> > }
> >
> > @@ -510,11 +515,6 @@ static int sun4i_backend_atomic_check(struct
> > sunxi_engine *engine,
> > if (fb->format->has_alpha)
> > num_alpha_planes++;
> >
> > - if (sun4i_format_is_yuv(fb->format->format)) {
> > - DRM_DEBUG_DRIVER("Plane FB format is
> > YUV\n");
> > - num_yuv_planes++;
> > - }
> > -
>
> Why is this needed?
I forgot to comment on this in the commit message. We only need to count
YUV planes when they come directly to the backend, not when they are
piped through the frontend (which outputs RGB, not YUV, to the
frontend).
> > DRM_DEBUG_DRIVER("Plane zpos is %d\n",
> > plane_state->normalized_zpos);
> >
> > diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.c
> > b/drivers/gpu/drm/sun4i/sun4i_drv.c
> > index 3957c2ff6870..d374bb61c565 100644
> > --- a/drivers/gpu/drm/sun4i/sun4i_drv.c
> > +++ b/drivers/gpu/drm/sun4i/sun4i_drv.c
> > @@ -42,7 +42,7 @@ static struct drm_driver sun4i_drv_driver = {
> > .minor = 0,
> >
> > /* GEM Operations */
> > - .dumb_create = drm_gem_cma_dumb_create,
> > + .dumb_create = drm_sun4i_gem_dumb_create,
> > .gem_free_object_unlocked = drm_gem_cma_free_object,
> > .gem_vm_ops = &drm_gem_cma_vm_ops,
> >
> > @@ -60,6 +60,15 @@ static struct drm_driver sun4i_drv_driver = {
> > /* Frame Buffer Operations */
> > };
> >
> > +int drm_sun4i_gem_dumb_create(struct drm_file *file_priv,
> > + struct drm_device *drm,
> > + struct drm_mode_create_dumb *args)
> > +{
> > + args->pitch = ALIGN(DIV_ROUND_UP(args->width * args->bpp,
> > 8), 2);
> > +
> > + return drm_gem_cma_dumb_create_internal(file_priv, drm,
> > args);
> > +}
> > +
> > static void sun4i_remove_framebuffers(void)
> > {
> > struct apertures_struct *ap;
> > diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.h
> > b/drivers/gpu/drm/sun4i/sun4i_drv.h
> > index 5750b8ce8b31..47969711a889 100644
> > --- a/drivers/gpu/drm/sun4i/sun4i_drv.h
> > +++ b/drivers/gpu/drm/sun4i/sun4i_drv.h
> > @@ -23,4 +23,8 @@ struct sun4i_drv {
> > struct list_head tcon_list;
> > };
> >
> > +int drm_sun4i_gem_dumb_create(struct drm_file *file_priv,
> > + struct drm_device *drm,
> > + struct drm_mode_create_dumb *args);
> > +
>
> I'm not sure this is needed, you just need to move the function before
> the structure definition.
Well, the sun4i_drv_driver definition is kind of at the start of the
file, so it felt better readability-wise to keep functions below it
instead of having the structure definition in a sandwich of functions.
> > #endif /* _SUN4I_DRV_H_ */
> > diff --git a/drivers/gpu/drm/sun4i/sun4i_frontend.c
> > b/drivers/gpu/drm/sun4i/sun4i_frontend.c
> > index 2dc33383be22..d9e58e96119c 100644
> > --- a/drivers/gpu/drm/sun4i/sun4i_frontend.c
> > +++ b/drivers/gpu/drm/sun4i/sun4i_frontend.c
> > @@ -16,6 +16,7 @@
> > #include <linux/reset.h>
> >
> > #include "sun4i_drv.h"
> > +#include "sun4i_format.h"
> > #include "sun4i_frontend.h"
> >
> > static const u32 sun4i_frontend_vert_coef[32] = {
> > @@ -89,26 +90,135 @@ void sun4i_frontend_update_buffer(struct
> > sun4i_frontend *frontend,
> > {
> > struct drm_plane_state *state = plane->state;
> > struct drm_framebuffer *fb = state->fb;
> > + uint32_t format = fb->format->format;
> > + uint32_t width, height;
> > + uint32_t stride, offset;
> > + bool swap;
> > dma_addr_t paddr;
> >
> > - /* Set the line width */
> > - DRM_DEBUG_DRIVER("Frontend stride: %d bytes\n", fb-
> > >pitches[0]);
>
> Keeping that debug message would be valuable.
Agreed.
> > + width = state->src_w >> 16;
> > + height = state->src_h >> 16;
> > +
>
> You don't seem to be using these values anywhere.
You're right, width is only used for tiling adaptation, so it should be
introduced later. Height is totally unused so it will be dropped.
> > regmap_write(frontend->regs, SUN4I_FRONTEND_LINESTRD0_REG,
> > fb->pitches[0]);
> >
> > + if (drm_format_num_planes(format) > 1)
> > + regmap_write(frontend->regs,
> > SUN4I_FRONTEND_LINESTRD1_REG,
> > + fb->pitches[1]);
> > +
> > + if (drm_format_num_planes(format) > 2)
> > + regmap_write(frontend->regs,
> > SUN4I_FRONTEND_LINESTRD2_REG,
> > + fb->pitches[2]);
> > +
> > /* Set the physical address of the buffer in memory */
> > paddr = drm_fb_cma_get_gem_addr(fb, state, 0);
> > paddr -= PHYS_OFFSET;
> > - DRM_DEBUG_DRIVER("Setting buffer address to %pad\n",
> > &paddr);
> > + DRM_DEBUG_DRIVER("Setting buffer #0 address to %pad\n",
> > &paddr);
> > regmap_write(frontend->regs, SUN4I_FRONTEND_BUF_ADDR0_REG,
> > paddr);
> > +
> > + /* Some planar formats require chroma channel swapping by
> > hand. */
> > + swap = sun4i_frontend_format_chroma_requires_swap(format);
> > +
> > + if (drm_format_num_planes(format) > 1) {
> > + paddr = drm_fb_cma_get_gem_addr(fb, state, swap ? 2
> > : 1);
> > + paddr -= PHYS_OFFSET;
> > + DRM_DEBUG_DRIVER("Setting buffer #1 address to
> > %pad\n", &paddr);
> > + regmap_write(frontend->regs,
> > SUN4I_FRONTEND_BUF_ADDR1_REG,
> > + paddr);
> > + }
> > +
> > + if (drm_format_num_planes(format) > 2) {
> > + paddr = drm_fb_cma_get_gem_addr(fb, state, swap ? 1
> > : 2);
> > + paddr -= PHYS_OFFSET;
> > + DRM_DEBUG_DRIVER("Setting buffer #2 address to
> > %pad\n", &paddr);
> > + regmap_write(frontend->regs,
> > SUN4I_FRONTEND_BUF_ADDR2_REG,
> > + paddr);
> > + }
> > }
> > EXPORT_SYMBOL(sun4i_frontend_update_buffer);
> >
> > static int sun4i_frontend_drm_format_to_input_fmt(uint32_t fmt, u32
> > *val)
> > {
> > + if (sun4i_format_is_rgb(fmt))
> > + *val = SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_RGB;
> > + else if (sun4i_format_is_yuv411(fmt))
> > + *val = SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_YUV411;
> > + else if (sun4i_format_is_yuv420(fmt))
> > + *val = SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_YUV420;
> > + else if (sun4i_format_is_yuv422(fmt))
> > + *val = SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_YUV422;
> > + else if (sun4i_format_is_yuv444(fmt))
> > + *val = SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_YUV444;
> > + else
> > + return -EINVAL;
> > +
> > + return 0;
> > +}
> > +
> > +static int sun4i_frontend_drm_format_to_input_mode(uint32_t fmt,
> > u32 *val)
> > +{
> > + if (sun4i_format_is_packed(fmt))
> > + *val = SUN4I_FRONTEND_INPUT_FMT_DATA_MOD_PACKED;
> > + else if (sun4i_format_is_semiplanar(fmt))
> > + *val =
> > SUN4I_FRONTEND_INPUT_FMT_DATA_MOD_SEMIPLANAR;
> > + else if (sun4i_format_is_planar(fmt))
> > + *val = SUN4I_FRONTEND_INPUT_FMT_DATA_MOD_PLANAR;
> > + else
> > + return -EINVAL;
> > +
> > + return 0;
> > +}
> > +
> > +static int sun4i_frontend_drm_format_to_input_sequence(uint32_t
> > fmt, u32 *val)
> > +{
> > + /* Planar formats have an explicit input sequence. */
> > + if (sun4i_format_is_planar(fmt)) {
> > + *val = 0;
> > + return 0;
> > + }
> > +
> > switch (fmt) {
> > + /* RGB */
> > case DRM_FORMAT_XRGB8888:
> > - *val = 5;
> > + *val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_XRGB;
> > + return 0;
> > +
> > + case DRM_FORMAT_BGRX8888:
> > + *val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_BGRX;
> > + return 0;
> > +
> > + /* YUV420 */
> > + case DRM_FORMAT_NV12:
> > + *val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_UV;
> > + return 0;
> > +
> > + case DRM_FORMAT_NV21:
> > + *val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_VU;
> > + return 0;
> > +
> > + /* YUV422 */
> > + case DRM_FORMAT_YUYV:
> > + *val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_YUYV;
> > + return 0;
> > +
> > + case DRM_FORMAT_VYUY:
> > + *val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_VYUY;
> > + return 0;
> > +
> > + case DRM_FORMAT_YVYU:
> > + *val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_YVYU;
> > + return 0;
> > +
> > + case DRM_FORMAT_UYVY:
> > + *val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_UYVY;
> > + return 0;
> > +
> > + case DRM_FORMAT_NV16:
> > + *val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_UV;
> > + return 0;
> > +
> > + case DRM_FORMAT_NV61:
> > + *val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_VU;
> > return 0;
> >
> > default:
> > @@ -120,7 +230,11 @@ static int
> > sun4i_frontend_drm_format_to_output_fmt(uint32_t fmt, u32 *val)
> > {
> > switch (fmt) {
> > case DRM_FORMAT_XRGB8888:
> > - *val = 2;
> > + *val = SUN4I_FRONTEND_OUTPUT_FMT_DATA_FMT_XRGB8888;
> > + return 0;
> > +
> > + case DRM_FORMAT_BGRX8888:
> > + *val = SUN4I_FRONTEND_OUTPUT_FMT_DATA_FMT_BGRX8888;
> > return 0;
>
> Are we using this anywhere?
I don't think so. It seems simple enough to be kept around in case we
need it someday, but I don't really have strong opinions about it.
> >
> > default:
> > @@ -172,22 +286,52 @@ bool
> > sun4i_frontend_format_is_supported(uint32_t fmt)
> > return true;
> > }
> >
> > +bool sun4i_frontend_format_chroma_requires_swap(uint32_t fmt)
> > +{
> > + switch (fmt) {
> > + case DRM_FORMAT_YVU444:
> > + case DRM_FORMAT_YVU422:
> > + case DRM_FORMAT_YVU420:
> > + case DRM_FORMAT_YVU411:
> > + return true;
> > +
> > + default:
> > + return false;
> > + }
> > +}
> > +
> > int sun4i_frontend_update_formats(struct sun4i_frontend *frontend,
> > struct drm_plane *plane, uint32_t
> > out_fmt)
> > {
> > struct drm_plane_state *state = plane->state;
> > struct drm_framebuffer *fb = state->fb;
> > + uint32_t format = fb->format->format;
> > u32 out_fmt_val;
> > u32 in_fmt_val;
> > + u32 in_mod_val;
> > + u32 in_ps_val;
> > + u32 bypass;
> > + unsigned int i;
> > int ret;
> >
> > - ret = sun4i_frontend_drm_format_to_input_fmt(fb->format-
> > >format,
> > - &in_fmt_val);
> > + ret = sun4i_frontend_drm_format_to_input_fmt(format,
> > &in_fmt_val);
> > if (ret) {
> > DRM_DEBUG_DRIVER("Invalid input format\n");
> > return ret;
> > }
> >
> > + ret = sun4i_frontend_drm_format_to_input_mode(format,
> > &in_mod_val);
> > + if (ret) {
> > + DRM_DEBUG_DRIVER("Invalid input mode\n");
> > + return ret;
> > + }
> > +
> > + ret = sun4i_frontend_drm_format_to_input_sequence(format,
> > &in_ps_val);
> > + if (ret) {
> > + DRM_DEBUG_DRIVER("Invalid pixel sequence\n");
> > + return ret;
> > + }
> > +
> > ret = sun4i_frontend_drm_format_to_output_fmt(out_fmt,
> > &out_fmt_val);
> > if (ret) {
> > DRM_DEBUG_DRIVER("Invalid output format\n");
> > @@ -205,10 +349,30 @@ int sun4i_frontend_update_formats(struct
> > sun4i_frontend *frontend,
> > regmap_write(frontend->regs,
> > SUN4I_FRONTEND_CH0_VERTPHASE1_REG, 0x400);
> > regmap_write(frontend->regs,
> > SUN4I_FRONTEND_CH1_VERTPHASE1_REG, 0x400);
> >
> > + if (sun4i_format_is_yuv(format) &&
> > + !sun4i_format_is_yuv(out_fmt)) {
> > + /* Setup the CSC engine for YUV to RGB conversion.
> > */
> > +
> > + for (i = 0; i <
> > ARRAY_SIZE(sunxi_bt601_yuv2rgb_coef); i++)
> > + regmap_write(frontend->regs,
> > + SUN4I_FRONTEND_CSC_COEF_REG(i)
> > ,
> > + sunxi_bt601_yuv2rgb_coef[i]);
> > +
> > + regmap_update_bits(frontend->regs,
> > + SUN4I_FRONTEND_FRM_CTRL_REG,
> > + SUN4I_FRONTEND_FRM_CTRL_COEF_RDY
> > ,
> > + SUN4I_FRONTEND_FRM_CTRL_COEF_RDY
> > );
> > +
> > + bypass = 0;
> > + } else {
> > + bypass = SUN4I_FRONTEND_BYPASS_CSC_EN;
>
> I guess this is also something you introduce that should be in a
> separate patch.
Right, since we're moving the CSC bypass control around, I agree it's
best to have it as a preleminary patch for YUV support.
> > + }
> > +
> > + regmap_update_bits(frontend->regs,
> > SUN4I_FRONTEND_BYPASS_REG,
> > + SUN4I_FRONTEND_BYPASS_CSC_EN, bypass);
> > +
> > regmap_write(frontend->regs, SUN4I_FRONTEND_INPUT_FMT_REG,
> > - SUN4I_FRONTEND_INPUT_FMT_DATA_MOD(1) |
> > - SUN4I_FRONTEND_INPUT_FMT_DATA_FMT(in_fmt_val)
> > |
> > - SUN4I_FRONTEND_INPUT_FMT_PS(1));
> > + in_mod_val | in_fmt_val | in_ps_val);
> >
> > /*
> > * TODO: It look like the A31 and A80 at least will need
> > the
> > @@ -216,7 +380,7 @@ int sun4i_frontend_update_formats(struct
> > sun4i_frontend *frontend,
> > * ARGB8888).
> > */
> > regmap_write(frontend->regs, SUN4I_FRONTEND_OUTPUT_FMT_REG,
> > - SUN4I_FRONTEND_OUTPUT_FMT_DATA_FMT(out_fmt_val
> > ));
> > + out_fmt_val);
> >
> > return 0;
> > }
> > @@ -226,31 +390,45 @@ void sun4i_frontend_update_coord(struct
> > sun4i_frontend *frontend,
> > struct drm_plane *plane)
> > {
> > struct drm_plane_state *state = plane->state;
> > + struct drm_framebuffer *fb = state->fb;
> > + uint32_t format = fb->format->format;
> > + uint32_t luma_width, luma_height;
> > + uint32_t chroma_width, chroma_height;
> >
> > /* Set height and width */
> > - DRM_DEBUG_DRIVER("Frontend size W: %u H: %u\n",
> > + DRM_DEBUG_DRIVER("Frontend crtc size W: %u H: %u\n",
>
> The frontend is not the CRTC
Agreed.
> > state->crtc_w, state->crtc_h);
> > - regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_INSIZE_REG,
> > - SUN4I_FRONTEND_INSIZE(state->src_h >> 16,
> > - state->src_w >> 16));
> > - regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_INSIZE_REG,
> > - SUN4I_FRONTEND_INSIZE(state->src_h >> 16,
> > - state->src_w >> 16));
> >
> > + luma_width = chroma_width = state->src_w >> 16;
> > + luma_height = chroma_height = state->src_h >> 16;
> > +
> > + if (sun4i_format_is_yuv411(format)) {
> > + chroma_width = DIV_ROUND_UP(luma_width, 4);
> > + } else if (sun4i_format_is_yuv420(format)) {
> > + chroma_width = DIV_ROUND_UP(luma_width, 2);
> > + chroma_height = DIV_ROUND_UP(luma_height, 2);
> > + } else if (sun4i_format_is_yuv422(format)) {
> > + chroma_width = DIV_ROUND_UP(luma_width, 2);
> > + }
> > +
> > + regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_INSIZE_REG,
> > + SUN4I_FRONTEND_INSIZE(luma_height,
> > luma_width));
> > regmap_write(frontend->regs,
> > SUN4I_FRONTEND_CH0_OUTSIZE_REG,
> > SUN4I_FRONTEND_OUTSIZE(state->crtc_h, state-
> > >crtc_w));
> > + regmap_write(frontend->regs,
> > SUN4I_FRONTEND_CH0_HORZFACT_REG,
> > + (luma_width << 16) / state->crtc_w);
> > + regmap_write(frontend->regs,
> > SUN4I_FRONTEND_CH0_VERTFACT_REG,
> > + (luma_height << 16) / state->crtc_h);
> > +
> > + /* These also have to be specified, even for interleaved
> > formats. */
> > + regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_INSIZE_REG,
> > + SUN4I_FRONTEND_INSIZE(chroma_height,
> > chroma_width));
> > regmap_write(frontend->regs,
> > SUN4I_FRONTEND_CH1_OUTSIZE_REG,
> > SUN4I_FRONTEND_OUTSIZE(state->crtc_h, state-
> > >crtc_w));
> > -
> > - regmap_write(frontend->regs,
> > SUN4I_FRONTEND_CH0_HORZFACT_REG,
> > - state->src_w / state->crtc_w);
> > regmap_write(frontend->regs,
> > SUN4I_FRONTEND_CH1_HORZFACT_REG,
> > - state->src_w / state->crtc_w);
> > -
> > - regmap_write(frontend->regs,
> > SUN4I_FRONTEND_CH0_VERTFACT_REG,
> > - state->src_h / state->crtc_h);
> > + (chroma_width << 16) / state->crtc_w);
> > regmap_write(frontend->regs,
> > SUN4I_FRONTEND_CH1_VERTFACT_REG,
> > - state->src_h / state->crtc_h);
> > + (chroma_height << 16) / state->crtc_h);
> >
> > regmap_write_bits(frontend->regs,
> > SUN4I_FRONTEND_FRM_CTRL_REG,
> > SUN4I_FRONTEND_FRM_CTRL_REG_RDY,
> > @@ -382,10 +560,6 @@ static int sun4i_frontend_runtime_resume(struct
> > device *dev)
> > SUN4I_FRONTEND_EN_EN,
> > SUN4I_FRONTEND_EN_EN);
> >
> > - regmap_update_bits(frontend->regs,
> > SUN4I_FRONTEND_BYPASS_REG,
> > - SUN4I_FRONTEND_BYPASS_CSC_EN,
> > - SUN4I_FRONTEND_BYPASS_CSC_EN);
> > -
> > sun4i_frontend_scaler_init(frontend);
> >
> > return 0;
> > diff --git a/drivers/gpu/drm/sun4i/sun4i_frontend.h
> > b/drivers/gpu/drm/sun4i/sun4i_frontend.h
> > index a9cb908ced16..6dd1d18752f4 100644
> > --- a/drivers/gpu/drm/sun4i/sun4i_frontend.h
> > +++ b/drivers/gpu/drm/sun4i/sun4i_frontend.h
> > @@ -21,17 +21,56 @@
> > #define SUN4I_FRONTEND_BYPASS_REG 0x008
> > #define SUN4I_FRONTEND_BYPASS_CSC_EN BIT(1)
> >
> > +#define SUN4I_FRONTEND_AGTH_SEL_REG 0x00C
> > +#define SUN4I_FRONTEND_AGTH_SEL_ORIGINAL BIT(8)
> > +
> > #define SUN4I_FRONTEND_BUF_ADDR0_REG 0x020
> > +#define SUN4I_FRONTEND_BUF_ADDR1_REG 0x024
> > +#define SUN4I_FRONTEND_BUF_ADDR2_REG 0x028
> > +
> > +#define SUN4I_FRONTEND_TB_OFF0_REG 0x030
> > +#define SUN4I_FRONTEND_TB_OFF1_REG 0x034
> > +#define SUN4I_FRONTEND_TB_OFF2_REG 0x038
> > +
> > +#define SUN4I_FRONTEND_TB_OFF_X1(x1) ((x1)
> > << 16)
> > +#define SUN4I_FRONTEND_TB_OFF_Y0(y0) ((y0)
> > << 8)
> > +#define SUN4I_FRONTEND_TB_OFF_X0(x0) (x0)
> >
> > #define SUN4I_FRONTEND_LINESTRD0_REG 0x040
> > +#define SUN4I_FRONTEND_LINESTRD1_REG 0x044
> > +#define SUN4I_FRONTEND_LINESTRD2_REG 0x048
> >
> > #define SUN4I_FRONTEND_INPUT_FMT_REG 0x04c
> > -#define SUN4I_FRONTEND_INPUT_FMT_DATA_MOD(mod) ((mod
> > ) << 8)
> > -#define SUN4I_FRONTEND_INPUT_FMT_DATA_FMT(fmt) ((fmt
> > ) << 4)
> > -#define SUN4I_FRONTEND_INPUT_FMT_PS(ps) (ps)
> > +
> > +#define SUN4I_FRONTEND_INPUT_FMT_DATA_MOD_MASK
> > GENMASK(10, 8)
> > +#define SUN4I_FRONTEND_INPUT_FMT_DATA_MOD_PLANAR (0
> > << 8)
> > +#define SUN4I_FRONTEND_INPUT_FMT_DATA_MOD_PACKED (1
> > << 8)
> > +#define SUN4I_FRONTEND_INPUT_FMT_DATA_MOD_SEMIPLANAR
> > (2 << 8)
> > +#define SUN4I_FRONTEND_INPUT_FMT_DATA_MOD_MB32_PLANAR
> > (4 << 8)
> > +#define SUN4I_FRONTEND_INPUT_FMT_DATA_MOD_MB32_SEMIPLANAR (6
> > << 8)
> > +
> > +#define SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_MASK
> > GENMASK(6, 4)
> > +#define SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_YUV444 (0
> > << 4)
> > +#define SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_YUV422 (1
> > << 4)
> > +#define SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_YUV420 (2
> > << 4)
> > +#define SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_YUV411 (3
> > << 4)
> > +#define SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_RGB
> > (5 << 4)
> > +
> > +#define SUN4I_FRONTEND_INPUT_FMT_DATA_PS_MASK
> > GENMASK(1, 0)
> > +#define SUN4I_FRONTEND_INPUT_FMT_DATA_PS_UYVY
> > 0
> > +#define SUN4I_FRONTEND_INPUT_FMT_DATA_PS_YUYV
> > 1
> > +#define SUN4I_FRONTEND_INPUT_FMT_DATA_PS_VYUY
> > 2
> > +#define SUN4I_FRONTEND_INPUT_FMT_DATA_PS_YVYU
> > 3
> > +#define SUN4I_FRONTEND_INPUT_FMT_DATA_PS_UV
> > 0
> > +#define SUN4I_FRONTEND_INPUT_FMT_DATA_PS_VU
> > 1
> > +#define SUN4I_FRONTEND_INPUT_FMT_DATA_PS_XRGB
> > 0
> > +#define SUN4I_FRONTEND_INPUT_FMT_DATA_PS_BGRX
> > 1
> >
> > #define SUN4I_FRONTEND_OUTPUT_FMT_REG 0x05c
> > -#define SUN4I_FRONTEND_OUTPUT_FMT_DATA_FMT(fmt) (fmt
> > )
> > +#define SUN4I_FRONTEND_OUTPUT_FMT_DATA_FMT_BGRX8888 1
> > +#define SUN4I_FRONTEND_OUTPUT_FMT_DATA_FMT_XRGB8888 2
> > +
> > +#define SUN4I_FRONTEND_CSC_COEF_REG(c) (0x070 + (0x4
> > * (c)))
> >
> > #define SUN4I_FRONTEND_CH0_INSIZE_REG 0x100
> > #define SUN4I_FRONTEND_INSIZE(h, w) ((((h) -
> > 1) << 16) | (((w) - 1)))
> > @@ -96,5 +135,6 @@ void sun4i_frontend_update_coord(struct
> > sun4i_frontend *frontend,
> > int sun4i_frontend_update_formats(struct sun4i_frontend *frontend,
> > struct drm_plane *plane, uint32_t
> > out_fmt);
> > bool sun4i_frontend_format_is_supported(uint32_t fmt);
> > +bool sun4i_frontend_format_chroma_requires_swap(uint32_t fmt);
> >
> > #endif /* _SUN4I_FRONTEND_H_ */
> > diff --git a/drivers/gpu/drm/sun4i/sun4i_layer.c
> > b/drivers/gpu/drm/sun4i/sun4i_layer.c
> > index 15238211a61a..a39eed6a0e75 100644
> > --- a/drivers/gpu/drm/sun4i/sun4i_layer.c
> > +++ b/drivers/gpu/drm/sun4i/sun4i_layer.c
> > @@ -128,19 +128,37 @@ static const struct drm_plane_funcs
> > sun4i_backend_layer_funcs = {
> > .update_plane =
> > drm_atomic_helper_update_plane,
> > };
> >
> > -static const uint32_t sun4i_backend_layer_formats[] = {
> > - DRM_FORMAT_ARGB8888,
> > +static const uint32_t sun4i_layer_formats[] = {
> > + /* RGB */
> > DRM_FORMAT_ARGB4444,
> > + DRM_FORMAT_RGBA4444,
> > DRM_FORMAT_ARGB1555,
> > DRM_FORMAT_RGBA5551,
> > - DRM_FORMAT_RGBA4444,
> > - DRM_FORMAT_RGB888,
> > DRM_FORMAT_RGB565,
> > - DRM_FORMAT_UYVY,
> > - DRM_FORMAT_VYUY,
> > + DRM_FORMAT_RGB888,
> > DRM_FORMAT_XRGB8888,
> > + DRM_FORMAT_BGRX8888,
> > + DRM_FORMAT_ARGB8888,
> > + /* YUV444 */
> > + DRM_FORMAT_YUV444,
> > + DRM_FORMAT_YVU444,
> > + /* YUV422 */
> > DRM_FORMAT_YUYV,
> > DRM_FORMAT_YVYU,
> > + DRM_FORMAT_UYVY,
> > + DRM_FORMAT_VYUY,
> > + DRM_FORMAT_NV16,
> > + DRM_FORMAT_NV61,
> > + DRM_FORMAT_YUV422,
> > + DRM_FORMAT_YVU422,
> > + /* YUV420 */
> > + DRM_FORMAT_NV12,
> > + DRM_FORMAT_NV21,
> > + DRM_FORMAT_YUV420,
> > + DRM_FORMAT_YVU420,
> > + /* YUV411 */
> > + DRM_FORMAT_YUV411,
> > + DRM_FORMAT_YVU411,
> > };
> >
> > static struct sun4i_layer *sun4i_layer_init_one(struct drm_device
> > *drm,
> > @@ -157,8 +175,8 @@ static struct sun4i_layer
> > *sun4i_layer_init_one(struct drm_device *drm,
> > /* possible crtcs are set later */
> > ret = drm_universal_plane_init(drm, &layer->plane, 0,
> > &sun4i_backend_layer_funcs,
> > - sun4i_backend_layer_formats,
> > - ARRAY_SIZE(sun4i_backend_lay
> > er_formats),
> > + sun4i_layer_formats,
> > + ARRAY_SIZE(sun4i_layer_forma
> > ts),
> > NULL, type, NULL);
>
> I stopped reviewing this, because it should be split in at least the
> following commits, possibly more:
> - one to add the custom GEM allocator
> - one to move the yuv number check in atomic_check
> - one to enable the input sequence computation
> - one to enable the input mode computation
> - one to move the CSC bypass setting from the probe to the
> update_fomats function
> - one to introduce the interleaved YUV formats
> - one to introduce the multi-planar YUV formats
> - one to rename the sun4i_backend_layer_formats array
I'll craft v2 in this direction then.
Cheers,
--
Paul Kocialkowski, Bootlin (formerly Free Electrons)
Embedded Linux and kernel engineering
https://bootlin.comAttachment:
signature.asc
Description: This is a digitally signed message part
_______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
