Re: [PATCH v6 3/3] arm64: dts: renesas: Add LVDS decoder to R-Car V3M Eagle

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jacopo,

On 03/20/2018 03:01 PM, Laurent Pinchart wrote:
> Hi Jacopo,
> 
> Thank you for the patch.
> 
> On Friday, 16 March 2018 17:16:39 EET Jacopo Mondi wrote:
>> The R-Car V3M Eagle board includes a transparent THC63LVD1024 LVDS
>> decoder, connected to the on-chip LVDS encoder output on one side
>> and to HDMI encoder ADV7511w on the other one.
>>
>> As the decoder does not need any configuration it has been so-far
>> omitted from DTS. Now that a driver is available, describe it in DT
>> as well.
>>
>> Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
>> Reviewed-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
> 
> The patch looks OK to me, but I think it should be squashed with Niklas' patch 
> that added display HDMI output support to the V3M Eagle DT.
> 
>> ---
>>
>> List of patch dependencies, as of renesas-drivers-2018-03-13-v4.16-rc5:
>>
>> - [PATCH v2 0/5] arm64: dts: renesas: r8a77970: enable HDMI output
>>    which includes DU, LVDS and FCPD enablement from:
>>   [PATCH v2 0/5] Add R8A77970/V3MSK LVDS/HDMI support
>> - [PATCH v4] v4l: vsp1: Fix video output on R8A77970
>>
>> Patches to be applied on top of
>> "arm64: dts: renesas: eagle: add HDMI output using the ADV7511W"
>>
>> Thanks
>>    j
>> ---
>>  arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 33 ++++++++++++++++++++---
>>  1 file changed, 30 insertions(+), 3 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
>> b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index c0fd144..69f43b8
>> 100644
>> --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
>> +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
>> @@ -42,6 +42,33 @@
>>  			};
>>  		};
>>  	};
>> +
>> +	thc63lvd1024: lvds-decoder {
>> +		compatible = "thine,thc63lvd1024";
>> +
>> +		ports {
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +
>> +			port@0 {
>> +				reg = <0>;
>> +
>> +				thc63lvd1024_in_0: endpoint {
>> +					remote-endpoint = <&lvds0_out>;
>> +				};
>> +			};
>> +
>> +			port@2{
>> +				reg = <2>;
>> +
>> +				thc63lvd1024_out_2: endpoint {
>> +					remote-endpoint = <&adv7511_in>;
>> +				};
>> +

Remove the empty line above.

>> +			};
>> +

Remove the empty line above.

>> +		};
>> +	};
>>  };
>>

--
With best wishes,
Vladimir
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux