On Wed, Mar 21, 2018 at 09:03:12PM +0100, Giulio Benetti wrote:
> The A20-Linova1-4_3 HMI, also called Q027_2_A which is printed on
> production label, is an industrial Human Machine Interface.
> It features:
> - 512MB DDR RAM
> - 1 Sd-card >= 4GB
> - 1 Usb otg(programmable via software) with A-Usb Connector
> - 1 Usb host
> - 1 Buzzer
> - 1 Input for LiPo
> - 1 Relay to signal absence of power supply
> - 1 External Rtc with 56 bytes of ram + CR2032 battery
> - 1 4.3" 24-bits Tft 480x272 with PCap on
> - 1 Mono audio 1-watt amplifier
> - 1 RS485 port
> - 1 Power On Line through +12Vdc reaching 57.600baud,
> from where it can be supplied and placed in a network of 50 units
> - exposed jtag pins
>
> HMI is supplied from +12Vdc.
> Ethernet is absent, so for debugging, need to enable rndis on Usb otg
> port through an A-A usb cable.
> It comes in different flavours for connector types and can be found with
> umounted features as requested by customers.
>
> Signed-off-by: Giulio Benetti <giulio.benetti@xxxxxxxxxxxxxxxx>
> ---
> .../devicetree/bindings/arm/micronova.txt | 6 +
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/sun7i-a20-linova1-ctp-4_3i.dts | 192 +++++++++++++++++++++
> 3 files changed, 199 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/micronova.txt
> create mode 100644 arch/arm/boot/dts/sun7i-a20-linova1-ctp-4_3i.dts
>
> diff --git a/Documentation/devicetree/bindings/arm/micronova.txt b/Documentation/devicetree/bindings/arm/micronova.txt
> new file mode 100644
> index 0000000..35c4127
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/micronova.txt
> @@ -0,0 +1,6 @@
> +Micronova Device Tree Bindings
> +---------------------------
> +
> +A20-LiNova1-4_3 HMI
> +Required root node properties:
> + - compatible = "micronova,a20-linova1-ctp-4_3i", "allwinner,sun7i-a20";
I'd prefer that board compatibles are documented where the SoC
compatibles are documented, but it seems mostly allwinner platforms have
not done this.
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index ade7a38..c45a4f25 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -941,6 +941,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
> sun7i-a20-lamobo-r1.dtb \
> sun7i-a20-m3.dtb \
> sun7i-a20-mk808c.dtb \
> + sun7i-a20-linova1-ctp-4_3i.dtb\
> sun7i-a20-olimex-som-evb.dtb \
> sun7i-a20-olinuxino-lime.dtb \
> sun7i-a20-olinuxino-lime2.dtb \
> diff --git a/arch/arm/boot/dts/sun7i-a20-linova1-ctp-4_3i.dts b/arch/arm/boot/dts/sun7i-a20-linova1-ctp-4_3i.dts
> new file mode 100644
> index 0000000..cd4ac73
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun7i-a20-linova1-ctp-4_3i.dts
> @@ -0,0 +1,192 @@
> +/*
> + * This is based on sun7i-a20-linova1-ctp-4_3i.dts
> + *
> + * Copyright 2014 - Hans de Goede <hdegoede@xxxxxxxxxx>
> + * Copyright (c) 2014 FUKAUMI Naoki <naobsd@xxxxxxxxx>
> + * Copyright (c) 2018 Giulio Benetti <giulio.benetti@xxxxxxxxxxxxxxxx>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
Use SPDX tag instead of license text. checkpatch.pl will now tell you
this.
> + */
> +
> +/dts-v1/;
> +#include "sun7i-a20.dtsi"
> +#include "sunxi-common-regulators.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +/ {
> + model = "Micronova srl LiNova1 CTP 4.3i";
> + compatible = "micronova,a20-linova1-ctp-4_3i", "allwinner,sun7i-a20";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + panel: panel {
> + compatible = "cdtech,s043wq26h-ct7", "simple-panel";
> + power-supply = <®_vcc3v3>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + panel_input: endpoint@0 {
> + reg = <0>;
reg is not needed if there is only one child.
> + remote-endpoint = <&tcon0_out_panel>;
> + };
> + };
> + };
> +};
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
