On 15.03.2018 11:56, Jacopo Mondi wrote: > The R-Car V3M Eagle board includes a transparent THC63LVD1024 LVDS > decoder, connected to the on-chip LVDS encoder output on one side > and to HDMI encoder ADV7511w on the other one. > > As the decoder does not need any configuration it has been so-far > omitted from DTS. Now that a driver is available, describe it in DT > as well. > > Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx> Reviewed-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx> -- Regards Andrzej > --- > arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 33 +++++++++++++++++++++++--- > 1 file changed, 30 insertions(+), 3 deletions(-) > > diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts > index c0fd144..69f43b8 100644 > --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts > +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts > @@ -42,6 +42,33 @@ > }; > }; > }; > + > + thc63lvd1024: lvds-decoder { > + compatible = "thine,thc63lvd1024"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + thc63lvd1024_in_0: endpoint { > + remote-endpoint = <&lvds0_out>; > + }; > + }; > + > + port@2{ > + reg = <2>; > + > + thc63lvd1024_out_2: endpoint { > + remote-endpoint = <&adv7511_in>; > + }; > + > + }; > + > + }; > + }; > }; > > &avb { > @@ -98,7 +125,7 @@ > port@0 { > reg = <0>; > adv7511_in: endpoint { > - remote-endpoint = <&lvds0_out>; > + remote-endpoint = <&thc63lvd1024_out_2>; > }; > }; > > @@ -152,8 +179,8 @@ > > ports { > port@1 { > - endpoint { > - remote-endpoint = <&adv7511_in>; > + lvds0_out: endpoint { > + remote-endpoint = <&thc63lvd1024_in_0>; > }; > }; > }; _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel