Hi Peter, thanks a million for the extensive testing and reviewing. I'll go through the issues you've found below, but it appears to me that they're all either in the "works as intended" category or are caused by something unrelated to this series: On Mon, Mar 05, 2018 at 09:58:31PM +0100, Peter Wu wrote: > Issue 1 - GPU does not suspend on text console. > When present at the text console and an external monitor is connected > through HDMI or DP, the RPM counter is 1. Only when the cable is removed > (or when "echo off > /sys/class/drm/card1-HDMI-A-1/status"), the RPM > count drops to 0 and the GPU device suspends. When Xorg is started > (startx), the RPM counter also drops to 0 though. Yes, that behavior is intended: The GPU device is kept resumed as long as it has an active crtc, and it has an active crtc if it's used as text console. > Issue 2 - RPM counter for audio function drops below 0 on system sleep. > When both nouveau and snd-hda-intel are loaded and a HDMI (or DP?) cable > is connected, the RPM counter becomes one after suspend/resume. This > happens both with text console and Xorg. Which RPM counter becomes one? That of the GPU? If so, it would be caused by the GPU activating a crtc on hotplug to light up the display, hence staying resumed. I don't quite understand what you mean by "RPM counter for audio function drops below 0 on system sleep". I've gone through the HDA code and don't see an unbalanced pm_runtime_get / _put. However the PM core changes the usage count a couple of times over a system sleep cycle by acquiring/releasing a runtime PM ref or enabling/disabling runtime PM (see drivers/base/power/main.c), maybe that's what you observed. > Issue 3 - invalid PCI config reads to audio device if disconnected. > When no HDMI/DP cable is connected, the HDMI audio function will be > inaccessible after runtime/system resume. Assume nouveau loaded before > s/r, then loading snd-hda-intel will fail with: > > hdaudio hdaudioC1D0: no AFG or MFG node found > hdaudio hdaudioC1D1: no AFG or MFG node found > hdaudio hdaudioC1D2: no AFG or MFG node found > hdaudio hdaudioC1D3: no AFG or MFG node found > hdaudio hdaudioC1D4: no AFG or MFG node found > hdaudio hdaudioC1D5: no AFG or MFG node found > hdaudio hdaudioC1D6: no AFG or MFG node found > hdaudio hdaudioC1D7: no AFG or MFG node found > snd_hda_intel 0000:01:00.1: no codecs initialized Okay, that's really bad, but it appears to be caused by the BIOS hiding the audio function on resume if no cable is connected. I've attached 3 patches to this bugzilla to fix this issue: https://bugs.freedesktop.org/show_bug.cgi?id=75985 I've extensively tested system sleep in conjunction with the switcheroo_devlink patches and the above never occurred on my machine because the audio function is never hidden. I don't consider this issue a blocker for the switcheroo_devlink patches because I would expect it to occur regardless. Quite to the contrary, the switcheroo_devlink patches are a requirement to fix the issue because the audio function needs to be exposed either from the GPU driver or a PCI quirk applied to the GPU, and the audio function needs to delay resume until that has happened, which is achieved by the device link. > Issue 4 - runtime_active_kids leak with audio function. > After the above issue, the audio device never entered the suspended > state even though the runtime_usage counter reached 0. It turned out > that runtime_active_kids was 4. Every time snd-hda-intel is loaded (and > fails to initialize due to the above issue), this counter is increased. Yes, the codec devices are created as children of the HDA device and keep it awake because initialization failed. This won't occur once issue 3 is fixed. > Issue 5 - audio breaks after system sleep or stopping Xorg. > When Xorg is stopped or the system sleep/resumes while speaker-test is > active (e.g. in GNU screen), audio stops playing and speaker-test exits. That is odd, I don't have an explanation for this but suspect a bug in the sound code. > Issue 6 - wrong pin status reported / no audio > (Possibly "working as expected" since audio is tied to GPU function.) > Scenario: HDMI cable is connected but GPU is unused > ("echo off > /sys/class/drm/card1-HDMI-1-1/status" from console or > with "xrandr --output HDMI-A-1 --off"). hdajacksensetest reports no > HDMI pin presence even if connected, dmesg reports: > > nouveau 0000:01:00.0: DRM: DDC responded, but no EDID for HDMI-A-1 Interesting, and yes, that would seem to be working as expected. > Issue 7 - nouveau: warning after unloading after stopping Xorg > (Issue in nouveau, likely not related to this patch set.) > After "xrandr --output HDMI-1-1 --mode 2560x1440" in Xorg, stopping Xorg > (and possibly "echo off > /sys/class/drm/card1-HDMI-A-1/status"), > removing nouveau triggered: > > WARNING: CPU: 7 PID: 5475 at drivers/gpu/drm/drm_mode_config.c:439 drm_mode_config_cleanup+0x1fa/0x260 Okay, the driver was unloaded while the connector was still active. You should also see a "connector HDMI-1-1 leaked!" message in dmesg. I thought I had fixed this two years ago with commit 523872f6b072 ("drm/nouveau: Turn off CRTCs on driver unload"). Either that commit didn't work as it should or the issue reappeared. :-( So yes, it's a bug, but unrelated to the switcheroo_devlink patches. > Issue 8 - acpi: sleeping function in atomic context. > (Issue is likely not related to this patch set.) > At some point I also got a BUG, nouveau was already unloaded and I ran: > "echo 1 | tee /sys/bus/pci/devices/0000:01:00.{0,1}/remove" > > BUG: sleeping function called from invalid context at /home/peter/linux/mm/slab.h:419 Wow, that would seem to be a bug in ACPI code, sorry, I'm clueless about that one. :-) Once again thanks and let me know if unhiding the audio function as per the patches I attached to the above-linked bugzilla fixes issue 3. Lukas _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
