[PATCH v4 14/38] drm/bridge: analogix_dp: Set PD_INC_BG first when powering up edp phy

[Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>]

From: zain wang <wzz@xxxxxxxxxxxxxx>

Following the correct power up sequence:
dp_pd=ff => dp_pd=7f => wait 10us => dp_pd=00

Cc: Stéphane Marchesin <marcheu@xxxxxxxxxxxx>
Signed-off-by: zain wang <wzz@xxxxxxxxxxxxxx>
Signed-off-by: Sean Paul <seanpaul@xxxxxxxxxxxx>
Signed-off-by: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
---

 drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 10 ++++++++--
 drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h |  3 +++
 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index b47c5af43560..bb72f8b0e603 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -321,10 +321,16 @@ void analogix_dp_set_analog_power_down(struct analogix_dp_device *dp,
 		break;
 	case POWER_ALL:
 		if (enable) {
-			reg = DP_PHY_PD | AUX_PD | CH3_PD | CH2_PD |
-				CH1_PD | CH0_PD;
+			reg = DP_ALL_PD;
 			writel(reg, dp->reg_base + phy_pd_addr);
 		} else {
+			reg = DP_ALL_PD;
+			writel(reg, dp->reg_base + phy_pd_addr);
+			usleep_range(10, 15);
+			reg &= ~DP_INC_BG;
+			writel(reg, dp->reg_base + phy_pd_addr);
+			usleep_range(10, 15);
+
 			writel(0x00, dp->reg_base + phy_pd_addr);
 		}
 		break;
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
index 40200c652533..9602668669f4 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
@@ -342,12 +342,15 @@
 #define DP_PLL_REF_BIT_1_2500V			(0x7 << 0)
 
 /* ANALOGIX_DP_PHY_PD */
+#define DP_INC_BG				(0x1 << 7)
+#define DP_EXP_BG				(0x1 << 6)
 #define DP_PHY_PD				(0x1 << 5)
 #define AUX_PD					(0x1 << 4)
 #define CH3_PD					(0x1 << 3)
 #define CH2_PD					(0x1 << 2)
 #define CH1_PD					(0x1 << 1)
 #define CH0_PD					(0x1 << 0)
+#define DP_ALL_PD				(0xff)
 
 /* ANALOGIX_DP_PHY_TEST */
 #define MACRO_RST				(0x1 << 5)
-- 
2.16.1

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel