On Fri, Mar 02, 2018 at 02:25:58PM -0800, matthew.s.atwood@xxxxxxxxx wrote:
> From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
>
> For panels that do not follow Display Port specifications mask off invalid
> values for DP_TRAINING_AUX_RD_INTERVAL. Specification lists acceptable
> values 0-4 all other values are reserved and bit 7 of DPCD 0x0000e
> describes another feature. Currently the code uses all of DPCD 0x0000e and
> can cause max wait for 1024 ms instead of 16 ms as specified table 2-158.
> This address is read for both clock recovery and channel equalization.
>
> Signed-off-by: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
> ---
> drivers/gpu/drm/drm_dp_helper.c | 4 ++--
> include/drm/drm_dp_helper.h | 1 +
> 2 files changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
> index adf79be..a7e9b75 100644
> --- a/drivers/gpu/drm/drm_dp_helper.c
> +++ b/drivers/gpu/drm/drm_dp_helper.c
> @@ -122,7 +122,7 @@ void drm_dp_link_train_clock_recovery_delay(const u8 dpcd[DP_RECEIVER_CAP_SIZE])
> if (dpcd[DP_TRAINING_AUX_RD_INTERVAL] == 0)
> udelay(100);
> else
> - mdelay(dpcd[DP_TRAINING_AUX_RD_INTERVAL] * 4);
> + mdelay((dpcd[DP_TRAINING_AUX_RD_INTERVAL] & DP_TRAINING_AUX_RD_MASK) * 4);
> }
> EXPORT_SYMBOL(drm_dp_link_train_clock_recovery_delay);
>
> @@ -130,7 +130,7 @@ void drm_dp_link_train_channel_eq_delay(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) {
> if (dpcd[DP_TRAINING_AUX_RD_INTERVAL] == 0)
> udelay(400);
> else
> - mdelay(dpcd[DP_TRAINING_AUX_RD_INTERVAL] * 4);
> + mdelay((dpcd[DP_TRAINING_AUX_RD_INTERVAL] & DP_TRAINING_AUX_RD_MASK) * 4);
> }
> EXPORT_SYMBOL(drm_dp_link_train_channel_eq_delay);
>
> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
> index da58a42..77ba003 100644
> --- a/include/drm/drm_dp_helper.h
> +++ b/include/drm/drm_dp_helper.h
> @@ -118,6 +118,7 @@
> # define DP_DPCD_DISPLAY_CONTROL_CAPABLE (1 << 3) /* edp v1.2 or higher */
>
> #define DP_TRAINING_AUX_RD_INTERVAL 0x00e /* XXX 1.2? */
> +# define DP_TRAINING_AUX_RD_MASK 0x7 /* 1.4 */
I confirmed it is already part of 1.2 and 1.3
So probably a good idea to already to s/XXX 1.2?/1.2/
but this is optional and up to you.
With s/1.4/1.2 feel free to add:
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
(well... in a hope that no other bad panel uses 5,6 or 7,
that are also reserved values. But I believe these cases shouldn't
be as bad as this one you faced here anyways)
>
> #define DP_ADAPTER_CAP 0x00f /* 1.2 */
> # define DP_FORCE_LOAD_SENSE_CAP (1 << 0)
> --
> 2.7.4
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
