Handle both positive and negative dclk polarity,
according to bus_flags.
Signed-off-by: Giulio Benetti <giulio.benetti@xxxxxxxxxxxxxxxx>
---
drivers/gpu/drm/sun4i/sun4i_tcon.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index aaf911a..534e5ee 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -17,6 +17,7 @@
#include <drm/drm_encoder.h>
#include <drm/drm_modes.h>
#include <drm/drm_of.h>
+#include <drm/drm_panel.h>
#include <uapi/drm/drm_mode.h>
@@ -340,6 +341,9 @@ static void sun4i_tcon0_mode_set_lvds(struct sun4i_tcon *tcon,
static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
const struct drm_display_mode *mode)
{
+ struct drm_panel *panel = tcon->panel;
+ struct drm_connector *connector = panel->connector;
+ struct drm_display_info display_info = connector->display_info;
unsigned int bp, hsync, vsync;
u8 clk_delay;
u32 val = 0;
@@ -395,8 +399,15 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
if (mode->flags & DRM_MODE_FLAG_PVSYNC)
val |= SUN4I_TCON0_IO_POL_VSYNC_POSITIVE;
+ if (display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_POSEDGE)
+ clk_set_phase(tcon->dclk, 240);
+
+ if (display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_NEGEDGE)
+ clk_set_phase(tcon->dclk, 0);
+
regmap_update_bits(tcon->regs, SUN4I_TCON0_IO_POL_REG,
- SUN4I_TCON0_IO_POL_HSYNC_POSITIVE | SUN4I_TCON0_IO_POL_VSYNC_POSITIVE,
+ SUN4I_TCON0_IO_POL_HSYNC_POSITIVE |
+ SUN4I_TCON0_IO_POL_VSYNC_POSITIVE,
val);
/* Map output pins to channel 0 */
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
