A5XX GPUs can be run in either 32 or 64 bit mode. The GPU registers
and the microcode use 64 bit virtual addressing in either case but the
upper 32 bits are ignored if the GPU is in 32 bit mode. There is no
performance disadvantage to remaining in 64 bit mode even if we are
only generating 32 bit addresses so switch over now to prepare for
using addresses above 4G for targets that support them.
Signed-off-by: Jordan Crouse <jcrouse@xxxxxxxxxxxxxx>
---
drivers/gpu/drm/msm/adreno/a5xx_gpu.c | 14 ++++++++++++++
drivers/gpu/drm/msm/msm_iommu.c | 2 +-
2 files changed, 15 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
index 7e09d44e4a15..c106606887e2 100644
--- a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
@@ -695,6 +695,20 @@ static int a5xx_hw_init(struct msm_gpu *gpu)
REG_A5XX_RBBM_SECVID_TSB_TRUSTED_BASE_HI, 0x00000000);
gpu_write(gpu, REG_A5XX_RBBM_SECVID_TSB_TRUSTED_SIZE, 0x00000000);
+ /* Put the GPU into 64 bit by default */
+ gpu_write(gpu, REG_A5XX_CP_ADDR_MODE_CNTL, 0x1);
+ gpu_write(gpu, REG_A5XX_VSC_ADDR_MODE_CNTL, 0x1);
+ gpu_write(gpu, REG_A5XX_GRAS_ADDR_MODE_CNTL, 0x1);
+ gpu_write(gpu, REG_A5XX_RB_ADDR_MODE_CNTL, 0x1);
+ gpu_write(gpu, REG_A5XX_PC_ADDR_MODE_CNTL, 0x1);
+ gpu_write(gpu, REG_A5XX_HLSQ_ADDR_MODE_CNTL, 0x1);
+ gpu_write(gpu, REG_A5XX_VFD_ADDR_MODE_CNTL, 0x1);
+ gpu_write(gpu, REG_A5XX_VPC_ADDR_MODE_CNTL, 0x1);
+ gpu_write(gpu, REG_A5XX_UCHE_ADDR_MODE_CNTL, 0x1);
+ gpu_write(gpu, REG_A5XX_SP_ADDR_MODE_CNTL, 0x1);
+ gpu_write(gpu, REG_A5XX_TPL1_ADDR_MODE_CNTL, 0x1);
+ gpu_write(gpu, REG_A5XX_RBBM_SECVID_TSB_ADDR_MODE_CNTL, 0x1);
+
ret = adreno_hw_init(gpu);
if (ret)
return ret;
diff --git a/drivers/gpu/drm/msm/msm_iommu.c b/drivers/gpu/drm/msm/msm_iommu.c
index b23d33622f37..fdbe1a8372f0 100644
--- a/drivers/gpu/drm/msm/msm_iommu.c
+++ b/drivers/gpu/drm/msm/msm_iommu.c
@@ -30,7 +30,7 @@ static int msm_fault_handler(struct iommu_domain *domain, struct device *dev,
struct msm_iommu *iommu = arg;
if (iommu->base.handler)
return iommu->base.handler(iommu->base.arg, iova, flags);
- pr_warn_ratelimited("*** fault: iova=%08lx, flags=%d\n", iova, flags);
+ pr_warn_ratelimited("*** fault: iova=%16lx, flags=%d\n", iova, flags);
return 0;
}
--
2.16.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
