Our backend supports a per-plane alpha property. Support it through our new
helper.
Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
---
drivers/gpu/drm/sun4i/sun4i_backend.c | 16 +++++++++++++---
drivers/gpu/drm/sun4i/sun4i_backend.h | 3 +++
drivers/gpu/drm/sun4i/sun4i_layer.c | 2 ++
3 files changed, 18 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/sun4i/sun4i_backend.c b/drivers/gpu/drm/sun4i/sun4i_backend.c
index f387420bda8d..0ec00600eace 100644
--- a/drivers/gpu/drm/sun4i/sun4i_backend.c
+++ b/drivers/gpu/drm/sun4i/sun4i_backend.c
@@ -191,6 +191,15 @@ int sun4i_backend_update_layer_formats(struct sun4i_backend *backend,
DRM_DEBUG_DRIVER("Switching display backend interlaced mode %s\n",
interlaced ? "on" : "off");
+ val = SUN4I_BACKEND_ATTCTL_REG0_LAY_GLBALPHA(state->alpha);
+ if (state->alpha != 255)
+ val |= SUN4I_BACKEND_ATTCTL_REG0_LAY_GLBALPHA_EN;
+ regmap_update_bits(backend->engine.regs,
+ SUN4I_BACKEND_ATTCTL_REG0(layer),
+ SUN4I_BACKEND_ATTCTL_REG0_LAY_GLBALPHA_MASK |
+ SUN4I_BACKEND_ATTCTL_REG0_LAY_GLBALPHA_EN,
+ val);
+
ret = sun4i_backend_drm_format_to_layer(plane, fb->format->format,
&val);
if (ret) {
@@ -365,7 +374,7 @@ static int sun4i_backend_atomic_check(struct sunxi_engine *engine,
DRM_DEBUG_DRIVER("Plane FB format is %s\n",
drm_get_format_name(fb->format->format,
&format_name));
- if (fb->format->has_alpha)
+ if (fb->format->has_alpha || (plane_state->alpha != 255))
num_alpha_planes++;
DRM_DEBUG_DRIVER("Plane zpos is %d\n",
@@ -418,7 +427,8 @@ static int sun4i_backend_atomic_check(struct sunxi_engine *engine,
}
/* We can't have an alpha plane at the lowest position */
- if (plane_states[0]->fb->format->has_alpha)
+ if (plane_states[0]->fb->format->has_alpha ||
+ (plane_states[0]->alpha != 255))
return -EINVAL;
for (i = 1; i < num_planes; i++) {
@@ -430,7 +440,7 @@ static int sun4i_backend_atomic_check(struct sunxi_engine *engine,
* The only alpha position is the lowest plane of the
* second pipe.
*/
- if (fb->format->has_alpha)
+ if (fb->format->has_alpha || (p_state->alpha != 255))
current_pipe++;
s_state->pipe = current_pipe;
diff --git a/drivers/gpu/drm/sun4i/sun4i_backend.h b/drivers/gpu/drm/sun4i/sun4i_backend.h
index 52e77591186a..03294d5dd1a2 100644
--- a/drivers/gpu/drm/sun4i/sun4i_backend.h
+++ b/drivers/gpu/drm/sun4i/sun4i_backend.h
@@ -68,11 +68,14 @@
#define SUN4I_BACKEND_CKMIN_REG 0x884
#define SUN4I_BACKEND_CKCFG_REG 0x888
#define SUN4I_BACKEND_ATTCTL_REG0(l) (0x890 + (0x4 * (l)))
+#define SUN4I_BACKEND_ATTCTL_REG0_LAY_GLBALPHA_MASK GENMASK(31, 24)
+#define SUN4I_BACKEND_ATTCTL_REG0_LAY_GLBALPHA(x) ((x) << 24)
#define SUN4I_BACKEND_ATTCTL_REG0_LAY_PIPESEL_MASK BIT(15)
#define SUN4I_BACKEND_ATTCTL_REG0_LAY_PIPESEL(x) ((x) << 15)
#define SUN4I_BACKEND_ATTCTL_REG0_LAY_PRISEL_MASK GENMASK(11, 10)
#define SUN4I_BACKEND_ATTCTL_REG0_LAY_PRISEL(x) ((x) << 10)
#define SUN4I_BACKEND_ATTCTL_REG0_LAY_VDOEN BIT(1)
+#define SUN4I_BACKEND_ATTCTL_REG0_LAY_GLBALPHA_EN BIT(0)
#define SUN4I_BACKEND_ATTCTL_REG1(l) (0x8a0 + (0x4 * (l)))
#define SUN4I_BACKEND_ATTCTL_REG1_LAY_HSCAFCT GENMASK(15, 14)
diff --git a/drivers/gpu/drm/sun4i/sun4i_layer.c b/drivers/gpu/drm/sun4i/sun4i_layer.c
index 33ad377569ec..f491fd963534 100644
--- a/drivers/gpu/drm/sun4i/sun4i_layer.c
+++ b/drivers/gpu/drm/sun4i/sun4i_layer.c
@@ -37,6 +37,7 @@ static void sun4i_backend_layer_reset(struct drm_plane *plane)
if (state) {
plane->state = &state->state;
plane->state->plane = plane;
+ plane->state->alpha = 255;
plane->state->zpos = layer->id;
}
}
@@ -163,6 +164,7 @@ static struct sun4i_layer *sun4i_layer_init_one(struct drm_device *drm,
&sun4i_backend_layer_helper_funcs);
layer->backend = backend;
+ drm_plane_create_alpha_property(&layer->plane, 255);
drm_plane_create_zpos_property(&layer->plane, 0, 0,
SUN4I_BACKEND_NUM_LAYERS - 1);
--
git-series 0.9.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
