Hi Kieran, Thank you for the patch. On Tuesday, 13 February 2018 00:07:52 EET Kieran Bingham wrote: > From: Jean-Michel Hautbois <jean-michel.hautbois@xxxxxxxxxxx> > > The ADV7604 has thirteen 256-byte maps that can be accessed via the main > I²C ports. Each map has it own I²C address and acts as a standard slave > device on the I²C bus. > > Allow a device tree node to override the default addresses so that > address conflicts with other devices on the same bus may be resolved at > the board description level. > > Signed-off-by: Jean-Michel Hautbois <jean-michel.hautbois@xxxxxxxxxxx> > [Kieran: Re-adapted for mainline] > Signed-off-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx> > > --- > Based upon the original posting : > https://lkml.org/lkml/2014/10/22/469 > > v2: > - Split out DT bindings from driver updates > - Return -EINVAL on error paths from adv76xx_dummy_client() > > drivers/media/i2c/adv7604.c | 62 ++++++++++++++++++++++++++---------------- > 1 file changed, 40 insertions(+), 22 deletions(-) > > diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c > index 1544920ec52d..872e124793f8 100644 > --- a/drivers/media/i2c/adv7604.c > +++ b/drivers/media/i2c/adv7604.c > @@ -2734,6 +2734,27 @@ static const struct v4l2_ctrl_config > adv76xx_ctrl_free_run_color = { > > /* --------------------------------------------------------------------- */ > > +struct adv76xx_register { adv76xx_register seems to imply that this describes a particular register, while the structure describes a registers map. How about adv76xx_register_map, adv76xx_register_bank or adv76xx_register_page ? > + const char *name; > + u8 default_addr; > +}; > + > +static const struct adv76xx_register adv76xx_secondary_names[] = { The table doesn't contain secondary names only as there's an entry for the main map. How about calling it adv76xx_default_addresses or something along the same line ? > + [ADV76XX_PAGE_IO] = { "main", 0x4c }, > + [ADV7604_PAGE_AVLINK] = { "avlink", 0x42 }, > + [ADV76XX_PAGE_CEC] = { "cec", 0x40 }, > + [ADV76XX_PAGE_INFOFRAME] = { "infoframe", 0x3e }, > + [ADV7604_PAGE_ESDP] = { "esdp", 0x38 }, > + [ADV7604_PAGE_DPP] = { "dpp", 0x3c }, > + [ADV76XX_PAGE_AFE] = { "afe", 0x26 }, > + [ADV76XX_PAGE_REP] = { "rep", 0x32 }, > + [ADV76XX_PAGE_EDID] = { "edid", 0x36 }, > + [ADV76XX_PAGE_HDMI] = { "hdmi", 0x34 }, > + [ADV76XX_PAGE_TEST] = { "test", 0x30 }, > + [ADV76XX_PAGE_CP] = { "cp", 0x22 }, > + [ADV7604_PAGE_VDP] = { "vdp", 0x24 }, > +}; > + > static int adv76xx_core_init(struct v4l2_subdev *sd) > { > struct adv76xx_state *state = to_state(sd); > @@ -2834,13 +2855,26 @@ static void adv76xx_unregister_clients(struct > adv76xx_state *state) } > > static struct i2c_client *adv76xx_dummy_client(struct v4l2_subdev *sd, > - u8 addr, u8 io_reg) > + unsigned int i) Maybe unsigned int page ? With these fixed, Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > { > struct i2c_client *client = v4l2_get_subdevdata(sd); > + struct adv76xx_state *state = to_state(sd); > + struct adv76xx_platform_data *pdata = &state->pdata; > + unsigned int io_reg = 0xf2 + i; > + struct i2c_client *new_client; > + > + if (pdata && pdata->i2c_addresses[i]) > + new_client = i2c_new_dummy(client->adapter, > + pdata->i2c_addresses[i]); > + else > + new_client = i2c_new_secondary_device(client, > + adv76xx_secondary_names[i].name, > + adv76xx_secondary_names[i].default_addr); > > - if (addr) > - io_write(sd, io_reg, addr << 1); > - return i2c_new_dummy(client->adapter, io_read(sd, io_reg) >> 1); > + if (new_client) > + io_write(sd, io_reg, new_client->addr << 1); > + > + return new_client; > } > > static const struct adv76xx_reg_seq adv7604_recommended_settings_afe[] = { > @@ -3115,20 +3149,6 @@ static int adv76xx_parse_dt(struct adv76xx_state > *state) /* Disable the interrupt for now as no DT-based board uses it. */ > state->pdata.int1_config = ADV76XX_INT1_CONFIG_DISABLED; > > - /* Use the default I2C addresses. */ > - state->pdata.i2c_addresses[ADV7604_PAGE_AVLINK] = 0x42; > - state->pdata.i2c_addresses[ADV76XX_PAGE_CEC] = 0x40; > - state->pdata.i2c_addresses[ADV76XX_PAGE_INFOFRAME] = 0x3e; > - state->pdata.i2c_addresses[ADV7604_PAGE_ESDP] = 0x38; > - state->pdata.i2c_addresses[ADV7604_PAGE_DPP] = 0x3c; > - state->pdata.i2c_addresses[ADV76XX_PAGE_AFE] = 0x26; > - state->pdata.i2c_addresses[ADV76XX_PAGE_REP] = 0x32; > - state->pdata.i2c_addresses[ADV76XX_PAGE_EDID] = 0x36; > - state->pdata.i2c_addresses[ADV76XX_PAGE_HDMI] = 0x34; > - state->pdata.i2c_addresses[ADV76XX_PAGE_TEST] = 0x30; > - state->pdata.i2c_addresses[ADV76XX_PAGE_CP] = 0x22; > - state->pdata.i2c_addresses[ADV7604_PAGE_VDP] = 0x24; > - > /* Hardcode the remaining platform data fields. */ > state->pdata.disable_pwrdnb = 0; > state->pdata.disable_cable_det_rst = 0; > @@ -3478,11 +3498,9 @@ static int adv76xx_probe(struct i2c_client *client, > if (!(BIT(i) & state->info->page_mask)) > continue; > > - state->i2c_clients[i] = > - adv76xx_dummy_client(sd, state->pdata.i2c_addresses[i], > - 0xf2 + i); > + state->i2c_clients[i] = adv76xx_dummy_client(sd, i); > if (!state->i2c_clients[i]) { > - err = -ENOMEM; > + err = -EINVAL; > v4l2_err(sd, "failed to create i2c client %u\n", i); > goto err_i2c; > } -- Regards, Laurent Pinchart _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
