Hi Archit, On 07/02/18 12:33, Kieran Bingham wrote: > Hi Archit, > > Thank you for your review, > <snip> >>> unsigned int val; >>> int ret; >>> @@ -1153,24 +1151,35 @@ static int adv7511_probe(struct i2c_client *i2c, >>> const struct i2c_device_id *id) >>> if (ret) >>> goto uninit_regulators; >>> - regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR, edid_i2c_addr); >>> - regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR, >>> - main_i2c_addr - 0xa); > > > Packet address here is written as an offset of -0x0a, which gives 0x2f or 0x33 ... ? > > I think these current offsets are platform specific to a specific platform :) I appear to be using platform specific maths specific to a non-conforming platform or universe :-) Sorry for the incorrect assertion here. - I mixed up 8bit and 7bit values. The offsets are valid (when calculated correctly) - however - as per my reply to Laurent - I believe the patch which determined the offsets was using the wrong base :). Also - due to a hardware issue on the ADV7511 - the Wheat (as the only known user of two chips on the same bus) will need to be updated to ensure the current assignments don't conflict. -- Kieran _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
