Re: [Intel-gfx] i915 PSR test results and cursor lag

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On Sun, 2018-02-04 at 21:50 +0000, Andy Lutomirski wrote:
> On Sat, Feb 3, 2018 at 5:08 PM, Andy Lutomirski <luto@xxxxxxxxxx> wrote:
> > On Sat, Feb 3, 2018 at 5:20 AM, Pandiyan, Dhinakaran
> > <dhinakaran.pandiyan@xxxxxxxxx> wrote:
> >>
> >> On Fri, 2018-02-02 at 19:18 +0000, Andy Lutomirski wrote:
> >>> I updated to 4.15, and the situation is much worse.  With
> >>> enable_psr=1, the system survives for several seconds and then the
> >>> screen stops updating entirely.  If I boot with i915.enable_psr=1, I
> >>> get to the Fedora login screen and then the system dies.  If I set
> >>> enable_psr=1 using sysfs, it does a bit after the next resume.  It
> >>> seems like it also sometimes hangs even worse a bit after the screen
> >>> stops updating, but it's hard to tell.
> >>
> >> The login screen freeze sounds like what I have. Does this system have
> >> DMC firmware? If yes, can you try this series
> >> https://patchwork.freedesktop.org/series/37598/. You'll only need
> >> patches 1,8,9 and 10.
> >
> > That fixes the hang.  Feel free to add:
> >
> > Tested-by: Andy Lutomirski <luto@xxxxxxxxxx>
> >
> > to the i915 parts.  Also, any chance of getting it into the 4.15 stable kernels?
> 
> Correction: I'm still getting a second or two of complete screen
> freezing every now and then.  The kernel says:
Thanks a lot for testing. How do you trigger this freeze? Moving the
cursor? Did you apply these patches on top of drm-tip or was it
mainline?

I also have another patch here that addresses screen freezes in console
mode with PSR - https://patchwork.freedesktop.org/patch/201144/ in case
that is what you are interested in.
> 
> [69400.016524] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic
> update failure on pipe A (start=19 end=20) time 198 us, min 1073, max
> 1079, scanline start 1068, end 1082
> 
> So something might still be a bit buggy.

This series fixes only the long freezes due to frame counter resets, I
am sure there are still other issues with PSR.

BTW does your patch on top of these patches help with the cursor lag?

-DK
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux