The ELD may or may not change when switching the video mode.
If unchanged, don't trigger hot plug events to HDMI audio driver.
This avoids disturbing the user with repeated printks.
Reported-by: Nick Bowler <nbowler@xxxxxxxxxxxxxxxx>
Signed-off-by: Wu Fengguang <fengguang.wu@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_display.c | 51 ++++++++++++++++++++++---
1 file changed, 46 insertions(+), 5 deletions(-)
--- linux.orig/drivers/gpu/drm/i915/intel_display.c 2011-11-10 17:23:04.000000000 +0800
+++ linux/drivers/gpu/drm/i915/intel_display.c 2011-11-10 17:59:25.000000000 +0800
@@ -5811,6 +5811,35 @@ static int intel_crtc_mode_set(struct dr
return ret;
}
+static bool intel_eld_uptodate(struct drm_connector *connector,
+ int reg_eldv, uint32_t bits_eldv,
+ int reg_elda, uint32_t bits_elda,
+ int reg_edid)
+{
+ struct drm_i915_private *dev_priv = connector->dev->dev_private;
+ uint8_t *eld = connector->eld;
+ uint32_t i;
+
+ i = I915_READ(reg_eldv);
+ i &= bits_eldv;
+
+ if (!eld[0])
+ return !i;
+
+ if (!i)
+ return false;
+
+ i = I915_READ(reg_elda);
+ i &= ~bits_elda;
+ I915_WRITE(reg_elda, i);
+
+ for (i = 0; i < eld[2]; i++)
+ if (I915_READ(reg_edid) != *((uint32_t *)eld + i))
+ return false;
+
+ return true;
+}
+
static void g4x_write_eld(struct drm_connector *connector,
struct drm_crtc *crtc)
{
@@ -5827,6 +5856,12 @@ static void g4x_write_eld(struct drm_con
else
eldv = G4X_ELDV_DEVCTG;
+ if (intel_eld_uptodate(connector,
+ G4X_AUD_CNTL_ST, eldv,
+ G4X_AUD_CNTL_ST, G4X_ELD_ADDR,
+ G4X_HDMIW_HDMIEDID))
+ return;
+
i = I915_READ(G4X_AUD_CNTL_ST);
i &= ~(eldv | G4X_ELD_ADDR);
len = (i >> 9) & 0x1f; /* ELD buffer size */
@@ -5886,6 +5921,17 @@ static void ironlake_write_eld(struct dr
eldv = GEN5_ELD_VALIDB << ((i - 1) * 4);
}
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
+ DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n");
+ eld[5] |= (1 << 2); /* Conn_Type, 0x1 = DisplayPort */
+ }
+
+ if (intel_eld_uptodate(connector,
+ aud_cntrl_st2, eldv,
+ aud_cntl_st, GEN5_ELD_ADDRESS,
+ hdmiw_hdmiedid))
+ return;
+
i = I915_READ(aud_cntrl_st2);
i &= ~eldv;
I915_WRITE(aud_cntrl_st2, i);
@@ -5893,11 +5939,6 @@ static void ironlake_write_eld(struct dr
if (!eld[0])
return;
- if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
- DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n");
- eld[5] |= (1 << 2); /* Conn_Type, 0x1 = DisplayPort */
- }
-
i = I915_READ(aud_cntl_st);
i &= ~GEN5_ELD_ADDRESS;
I915_WRITE(aud_cntl_st, i);
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
