On 29/01/18 15:14, Boris Brezillon wrote: >> You don't disable the dsi_sys_clk neither in the ok nor in the error paths. > > Hm, it shouldn't be enabled in the first place: the runtime resume > hook takes care of enabling it, and we don't need this clock to access > IP registers (which is all we do in the probe). Ah, right, you can just use pm_runtime directly to enable the IP. I was looking at the docs, but it wasn't quite clear to me when exactly dsi_sys_clk is needed. I take it that you can access registers with just the dsi_p_clk, but you can't really do anything with the IP without dsi_sys_clk? If so, I think enabling both dsi_p_clk and dsi_sys_clk in the runtime PM callbacks is ok. Alternatively, if dsi_sys_clk is only needed for some specific functionality, a more correct way would be to enable that clock only when that operation is performed. Tomi -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
