Hi Philippe,
(CC'ing Daniel Vetter)
Thank you for the patch.
On Thursday, 25 January 2018 17:55:04 EET Philippe Cornu wrote:
> The "adjusted_mode" clock value (ie the real pixel clock) is more
> accurate than "mode" clock value (ie the panel/bridge requested
> clock value). It offers a better preciseness for timing
> computations and allows to reduce the extra dsi bandwidth in
> burst mode (from ~20% to ~10-12%, hw platform dependant).
>
> Signed-off-by: Philippe Cornu <philippe.cornu@xxxxxx>
The adjusted mode is documented as
/**
* @adjusted_mode:
*
* Internal display timings which can be used by the driver to handle
* differences between the mode requested by userspace in @mode and what
* is actually programmed into the hardware. It is purely driver
* implementation defined what exactly this adjusted mode means. Usually
* it is used to store the hardware display timings used between the
* CRTC and encoder blocks.
*/
This is easy to handle when the CRTC and encoder are controlled by the same
driver, as the field is "implementation defined" by a single driver . However,
when using bridges, there are two drivers involved, and they must both agree
to meaningfully use the adjusted mode. I can't see how to do so without
standardizing the meaning of the adjusted mode field.
Daniel, what's your opinion on this ?
> ---
> Note: This patch replaces "drm/bridge/synopsys: dsi: add optional pixel
> clock"
>
> drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c index
> ed8af32f8e52..b926b62e9e33 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> @@ -707,20 +707,20 @@ static void dw_mipi_dsi_bridge_mode_set(struct
> drm_bridge *bridge,
>
> clk_prepare_enable(dsi->pclk);
>
> - ret = phy_ops->get_lane_mbps(priv_data, mode, dsi->mode_flags,
> + ret = phy_ops->get_lane_mbps(priv_data, adjusted_mode, dsi->mode_flags,
> dsi->lanes, dsi->format, &dsi->lane_mbps);
> if (ret)
> DRM_DEBUG_DRIVER("Phy get_lane_mbps() failed\n");
>
> pm_runtime_get_sync(dsi->dev);
> dw_mipi_dsi_init(dsi);
> - dw_mipi_dsi_dpi_config(dsi, mode);
> + dw_mipi_dsi_dpi_config(dsi, adjusted_mode);
> dw_mipi_dsi_packet_handler_config(dsi);
> dw_mipi_dsi_video_mode_config(dsi);
> - dw_mipi_dsi_video_packet_config(dsi, mode);
> + dw_mipi_dsi_video_packet_config(dsi, adjusted_mode);
> dw_mipi_dsi_command_mode_config(dsi);
> - dw_mipi_dsi_line_timer_config(dsi, mode);
> - dw_mipi_dsi_vertical_timing_config(dsi, mode);
> + dw_mipi_dsi_line_timer_config(dsi, adjusted_mode);
> + dw_mipi_dsi_vertical_timing_config(dsi, adjusted_mode);
>
> dw_mipi_dsi_dphy_init(dsi);
> dw_mipi_dsi_dphy_timing_config(dsi);
> @@ -734,7 +734,7 @@ static void dw_mipi_dsi_bridge_mode_set(struct
> drm_bridge *bridge,
>
> dw_mipi_dsi_dphy_enable(dsi);
>
> - dw_mipi_dsi_wait_for_two_frames(mode);
> + dw_mipi_dsi_wait_for_two_frames(adjusted_mode);
>
> /* Switch to cmd mode for panel-bridge pre_enable & panel prepare */
> dw_mipi_dsi_set_mode(dsi, 0);
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
