From: Jean-Michel Hautbois <jean-michel.hautbois@xxxxxxxxxxx> The ADV7604 has thirteen 256-byte maps that can be accessed via the main I²C ports. Each map has it own I²C address and acts as a standard slave device on the I²C bus. Allow a device tree node to override the default addresses so that address conflicts with other devices on the same bus may be resolved at the board description level. Signed-off-by: Jean-Michel Hautbois <jean-michel.hautbois@xxxxxxxxxxx> [Kieran: Re-adapted for mainline] Signed-off-by: Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx> --- Based upon the original posting : https://lkml.org/lkml/2014/10/22/469 --- .../devicetree/bindings/media/i2c/adv7604.txt | 18 ++++++- drivers/media/i2c/adv7604.c | 60 ++++++++++++++-------- 2 files changed, 55 insertions(+), 23 deletions(-) diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.txt b/Documentation/devicetree/bindings/media/i2c/adv7604.txt index 9cbd92eb5d05..b64e313dcc66 100644 --- a/Documentation/devicetree/bindings/media/i2c/adv7604.txt +++ b/Documentation/devicetree/bindings/media/i2c/adv7604.txt @@ -13,7 +13,11 @@ Required Properties: - "adi,adv7611" for the ADV7611 - "adi,adv7612" for the ADV7612 - - reg: I2C slave address + - reg: I2C slave addresses + The ADV76xx has up to thirteen 256-byte maps that can be accessed via the + main I²C ports. Each map has it own I²C address and acts as a standard + slave device on the I²C bus. The main address is mandatory, others are + optional and revert to defaults if not specified. - hpd-gpios: References to the GPIOs that control the HDMI hot-plug detection pins, one per HDMI input. The active flag indicates the GPIO @@ -35,6 +39,11 @@ Optional Properties: - reset-gpios: Reference to the GPIO connected to the device's reset pin. - default-input: Select which input is selected after reset. + - reg-names : Names of maps with programmable addresses. + It can contain any map needing a non-default address. + Possible maps names are : + "main", "avlink", "cec", "infoframe", "esdp", "dpp", "afe", + "rep", "edid", "hdmi", "test", "cp", "vdp" Optional Endpoint Properties: @@ -52,7 +61,12 @@ Example: hdmi_receiver@4c { compatible = "adi,adv7611"; - reg = <0x4c>; + /* + * The edid page will be accessible @ 0x66 on the i2c bus. All + * other maps will retain their default addresses. + */ + reg = <0x4c 0x66>; + reg-names "main", "edid"; reset-gpios = <&ioexp 0 GPIO_ACTIVE_LOW>; hpd-gpios = <&ioexp 2 GPIO_ACTIVE_HIGH>; diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c index 1544920ec52d..c346b9a8fb57 100644 --- a/drivers/media/i2c/adv7604.c +++ b/drivers/media/i2c/adv7604.c @@ -2734,6 +2734,27 @@ static const struct v4l2_ctrl_config adv76xx_ctrl_free_run_color = { /* ----------------------------------------------------------------------- */ +struct adv76xx_register { + const char *name; + u8 default_addr; +}; + +static const struct adv76xx_register adv76xx_secondary_names[] = { + [ADV76XX_PAGE_IO] = { "main", 0x4c }, + [ADV7604_PAGE_AVLINK] = { "avlink", 0x42 }, + [ADV76XX_PAGE_CEC] = { "cec", 0x40 }, + [ADV76XX_PAGE_INFOFRAME] = { "infoframe", 0x3e }, + [ADV7604_PAGE_ESDP] = { "esdp", 0x38 }, + [ADV7604_PAGE_DPP] = { "dpp", 0x3c }, + [ADV76XX_PAGE_AFE] = { "afe", 0x26 }, + [ADV76XX_PAGE_REP] = { "rep", 0x32 }, + [ADV76XX_PAGE_EDID] = { "edid", 0x36 }, + [ADV76XX_PAGE_HDMI] = { "hdmi", 0x34 }, + [ADV76XX_PAGE_TEST] = { "test", 0x30 }, + [ADV76XX_PAGE_CP] = { "cp", 0x22 }, + [ADV7604_PAGE_VDP] = { "vdp", 0x24 }, +}; + static int adv76xx_core_init(struct v4l2_subdev *sd) { struct adv76xx_state *state = to_state(sd); @@ -2834,13 +2855,26 @@ static void adv76xx_unregister_clients(struct adv76xx_state *state) } static struct i2c_client *adv76xx_dummy_client(struct v4l2_subdev *sd, - u8 addr, u8 io_reg) + unsigned int i) { struct i2c_client *client = v4l2_get_subdevdata(sd); + struct adv76xx_state *state = to_state(sd); + struct adv76xx_platform_data *pdata = &state->pdata; + unsigned int io_reg = 0xf2 + i; + struct i2c_client *new_client; + + if (pdata && pdata->i2c_addresses[i]) + new_client = i2c_new_dummy(client->adapter, + pdata->i2c_addresses[i]); + else + new_client = i2c_new_secondary_device(client, + adv76xx_secondary_names[i].name, + adv76xx_secondary_names[i].default_addr); - if (addr) - io_write(sd, io_reg, addr << 1); - return i2c_new_dummy(client->adapter, io_read(sd, io_reg) >> 1); + if (new_client) + io_write(sd, io_reg, new_client->addr << 1); + + return new_client; } static const struct adv76xx_reg_seq adv7604_recommended_settings_afe[] = { @@ -3115,20 +3149,6 @@ static int adv76xx_parse_dt(struct adv76xx_state *state) /* Disable the interrupt for now as no DT-based board uses it. */ state->pdata.int1_config = ADV76XX_INT1_CONFIG_DISABLED; - /* Use the default I2C addresses. */ - state->pdata.i2c_addresses[ADV7604_PAGE_AVLINK] = 0x42; - state->pdata.i2c_addresses[ADV76XX_PAGE_CEC] = 0x40; - state->pdata.i2c_addresses[ADV76XX_PAGE_INFOFRAME] = 0x3e; - state->pdata.i2c_addresses[ADV7604_PAGE_ESDP] = 0x38; - state->pdata.i2c_addresses[ADV7604_PAGE_DPP] = 0x3c; - state->pdata.i2c_addresses[ADV76XX_PAGE_AFE] = 0x26; - state->pdata.i2c_addresses[ADV76XX_PAGE_REP] = 0x32; - state->pdata.i2c_addresses[ADV76XX_PAGE_EDID] = 0x36; - state->pdata.i2c_addresses[ADV76XX_PAGE_HDMI] = 0x34; - state->pdata.i2c_addresses[ADV76XX_PAGE_TEST] = 0x30; - state->pdata.i2c_addresses[ADV76XX_PAGE_CP] = 0x22; - state->pdata.i2c_addresses[ADV7604_PAGE_VDP] = 0x24; - /* Hardcode the remaining platform data fields. */ state->pdata.disable_pwrdnb = 0; state->pdata.disable_cable_det_rst = 0; @@ -3478,9 +3498,7 @@ static int adv76xx_probe(struct i2c_client *client, if (!(BIT(i) & state->info->page_mask)) continue; - state->i2c_clients[i] = - adv76xx_dummy_client(sd, state->pdata.i2c_addresses[i], - 0xf2 + i); + state->i2c_clients[i] = adv76xx_dummy_client(sd, i); if (!state->i2c_clients[i]) { err = -ENOMEM; v4l2_err(sd, "failed to create i2c client %u\n", i); -- 2.7.4 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
