On Wed, Jan 17, 2018 at 11:42 PM, Daniel Vetter <daniel@xxxxxxxx> wrote:
On Wed, Jan 17, 2018 at 11:46 PM, Gurchetan Singh
<gurchetansingh@xxxxxxxxxxxx> wrote:
>> dma api just isn't quite sufficient for implementing fast gpu drivers.
>
>
> Can you elaborate? IIRC the DMA API has strong synchronization guarantees
> and that can be problematic for GPU drivers. However, using the DMA API for
> flushing doesn't necessarily mean the driver has to use the rest of the DMA
> API.
>
>> but then it'd need to directly flush cpu caches and bypass the dma api.
>
>
> On ARM, cache flushing seems to vary from chipset to chipset. For example,
> on ARM32 a typical call-stack for dma_sync_single_for_device looks like:
>
> arm_dma_sync_single_for_device
> __dma_page_cpu_to_dev
> outer_clean_range
> outer_cache.clean_range
>
> There are multiple clean_range implementations out there (i.e,
> aurora_clean_range, l2c210_clean_range, feroceon_l2_clean_range), so that's
> why the DMA API was used in this case. On ARM64, things are a little
> simpler, but the DMA API seems to go directly to assembly (__dma_map_area)
> after a little indirection. Why do you think that's inefficient?
I never said it's inefficient. My only gripe is with adding the
pointless struct device * argument to flushing functions which really
don't care (nor should care) about the device. Because what we really
want to call is outer_clean_range here, and that doesn't need a struct
device *. Imo that function (or something similar) needs to be
exported and then used by drm_flush_* functions.
Okay, we can go with outer_clean_range on ARM and __dma_map_area/__dma_flush_area on ARM64. One concern, on ARM64 at-least, the header (arm64/include/asm/cacheflush.h) indicates we shouldn't call these functions directly for whatever reason:
"Cache maintenance functions used by the DMA API. No to be used directly."
However, if no one objects, that's the route we'll go.
Also note that arm has both flush and invalidate functions, but on x86
those are the same implementation (and we don't have a separate
drm_invalidate_* set of functions). That doesn't look like a too good
idea.
Of course that doesn't solve the problem of who's supposed to call it
and when in the dma-buf sharing situation.
-Daniel
> On Wed, Jan 17, 2018 at 12:31 AM, Daniel Vetter <daniel@xxxxxxxx> wrote:
>>
>> On Tue, Jan 16, 2018 at 04:35:58PM -0800, Gurchetan Singh wrote:
>> > The DMA API can be used to flush scatter gather tables and physical
>> > pages on ARM devices.
>> >
>> > Signed-off-by: Gurchetan Singh <gurchetansingh@xxxxxxxxxxxx>
>> > ---
>> > drivers/gpu/drm/drm_cache.c | 17 +++++++++++++++++
>> > drivers/gpu/drm/rockchip/rockchip_drm_gem.c | 7 ++-----
>> > drivers/gpu/drm/tegra/gem.c | 6 +-----
>> > 3 files changed, 20 insertions(+), 10 deletions(-)
>> >
>> > diff --git a/drivers/gpu/drm/drm_cache.c b/drivers/gpu/drm/drm_cache.c
>> > index 3d2bb9d71a60..98d6ebb40e96 100644
>> > --- a/drivers/gpu/drm/drm_cache.c
>> > +++ b/drivers/gpu/drm/drm_cache.c
>> > @@ -105,6 +105,18 @@ drm_flush_pages(struct device *dev, struct page
>> > *pages[],
>> > (unsigned long)page_virtual +
>> > PAGE_SIZE);
>> > kunmap_atomic(page_virtual);
>> > }
>> > +#elif defined(CONFIG_ARM) || defined(CONFIG_ARM64)
>> > + unsigned long i;
>> > + dma_addr_t dma_handle;
>> > +
>> > + if (!dev)
>> > + return;
>> > +
>> > + for (i = 0; i < num_pages; i++) {
>> > + dma_handle = phys_to_dma(drm->dev,
>> > page_to_phys(pages[i]));
>> > + dma_sync_single_for_device(dev, dma_handle, PAGE_SIZE,
>> > + DMA_TO_DEVICE);
>>
>> Erm no. These functions here are super-low-level functions used by drivers
>> which know exactly what they're doing. Which is reimplementing half of the
>> dma api behind the dma api's back because the dma api just isn't quite
>> sufficient for implementing fast gpu drivers.
>>
>> If all you end up doing is calling the dma api again, then pls just call
>> it directly.
>>
>> And just to make it clear: I'd be perfectly fine with adding arm support
>> here, but then it'd need to directly flush cpu caches and bypass the dma
>> api. Otherwise this is pointless.
>> -Daniel
>>
>> > + }
>> > #else
>> > pr_err("Architecture has no drm_cache.c support\n");
>> > WARN_ON_ONCE(1);
>> > @@ -136,6 +148,11 @@ drm_flush_sg(struct device *dev, struct sg_table
>> > *st)
>> >
>> > if (wbinvd_on_all_cpus())
>> > pr_err("Timed out waiting for cache flush\n");
>> > +#elif defined(CONFIG_ARM) || defined(CONFIG_ARM64)
>> > + if (!dev)
>> > + return;
>> > +
>> > + dma_sync_sg_for_device(dev, st->sgl, st->nents, DMA_TO_DEVICE);
>> > #else
>> > pr_err("Architecture has no drm_cache.c support\n");
>> > WARN_ON_ONCE(1);
>> > diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_gem.c
>> > b/drivers/gpu/drm/rockchip/rockchip_drm_gem.c
>> > index 8ac7eb25e46d..0157f90b5d10 100644
>> > --- a/drivers/gpu/drm/rockchip/rockchip_drm_gem.c
>> > +++ b/drivers/gpu/drm/rockchip/rockchip_drm_gem.c
>> > @@ -14,6 +14,7 @@
>> >
>> > #include <drm/drm.h>
>> > #include <drm/drmP.h>
>> > +#include <drm/drm_cache.h>
>> > #include <drm/drm_gem.h>
>> > #include <drm/drm_vma_manager.h>
>> > #include <linux/iommu.h>
>> > @@ -99,15 +100,11 @@ static int rockchip_gem_get_pages(struct
>> > rockchip_gem_object *rk_obj)
>> > /*
>> > * Fake up the SG table so that dma_sync_sg_for_device() can be
>> > used
>> > * to flush the pages associated with it.
>> > - *
>> > - * TODO: Replace this by drm_flush_sg() once it can be implemented
>> > - * without relying on symbols that are not exported.
>> > */
>> > for_each_sg(rk_obj->sgt->sgl, s, rk_obj->sgt->nents, i)
>> > sg_dma_address(s) = sg_phys(s);
>> >
>> > - dma_sync_sg_for_device(drm->dev, rk_obj->sgt->sgl,
>> > rk_obj->sgt->nents,
>> > - DMA_TO_DEVICE);
>> > + drm_flush_sg(drm->dev, rk_obj->sgt);
>> >
>> > return 0;
>> >
>> > diff --git a/drivers/gpu/drm/tegra/gem.c b/drivers/gpu/drm/tegra/gem.c
>> > index ab1e53d434e8..9945fd2f6bd6 100644
>> > --- a/drivers/gpu/drm/tegra/gem.c
>> > +++ b/drivers/gpu/drm/tegra/gem.c
>> > @@ -230,15 +230,11 @@ static int tegra_bo_get_pages(struct drm_device
>> > *drm, struct tegra_bo *bo)
>> > /*
>> > * Fake up the SG table so that dma_sync_sg_for_device() can be
>> > used
>> > * to flush the pages associated with it.
>> > - *
>> > - * TODO: Replace this by drm_clflash_sg() once it can be
>> > implemented
>> > - * without relying on symbols that are not exported.
>> > */
>> > for_each_sg(bo->sgt->sgl, s, bo->sgt->nents, i)
>> > sg_dma_address(s) = sg_phys(s);
>> >
>> > - dma_sync_sg_for_device(drm->dev, bo->sgt->sgl, bo->sgt->nents,
>> > - DMA_TO_DEVICE);
>> > + drm_flush_sg(drm->dev, bo->sgt);
>> >
>> > return 0;
>> >
>> > --
>> > 2.13.5
>> >
>> > _______________________________________________
>> > dri-devel mailing list
>> > dri-devel@xxxxxxxxxxxxxxxxxxxxg
>> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
>>
>> --
>> Daniel Vetter
>> Software Engineer, Intel Corporation
>> http://blog.ffwll.ch
>
>
--
Daniel Vetter
Software Engineer, Intel Corporation
_______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
