Hi Geert,
On Friday, 12 January 2018 12:09:45 EET Geert Uytterhoeven wrote:
> On Fri, Jan 12, 2018 at 1:58 AM, Laurent Pinchart wrote:
> > The internal LVDS encoders now have their own DT bindings. Before
> > switching the driver infrastructure to those new bindings, implement
> > backward-compatibility through live DT patching.
> >
> > Patching is disabled and will be enabled along with support for the new
> > DT bindings in the DU driver.
> >
> > Signed-off-by: Laurent Pinchart
> > <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
>
> Thanks for your patch!
>
> > --- a/drivers/gpu/drm/rcar-du/Kconfig
> > +++ b/drivers/gpu/drm/rcar-du/Kconfig
> > @@ -22,6 +22,7 @@ config DRM_RCAR_LVDS
> > bool "R-Car DU LVDS Encoder Support"
> > depends on DRM_RCAR_DU
> > select DRM_PANEL
> > + select OF_OVERLAY
>
> select OF_FLATTREE for of_fdt_unflatten_tree()
I'll fix that.
> (you can probably check with sparc all*config)
I'd have to install a sparc cross-compiler :-)
> > --- /dev/null
> > +++ b/drivers/gpu/drm/rcar-du/rcar_du_of.c
> > @@ -0,0 +1,440 @@
[snip]
> > +static void __init rcar_du_of_lvds_patch_one(struct device_node *du,
> > + unsigned int port_id,
> > + const struct resource *res,
> > + const __be32 *reg,
> > + const struct of_phandle_args
> > *clkspec,
> > + struct device_node *local,
> > + struct device_node *remote)
> > +{
> >
> > +
> > + /* Skip if the LVDS node already exists. */
> > + sprintf(name, "lvds@%llx", (u64)res->start);
>
> I guess you cannot use %pa because you don't want a 0x prefix?
Correct.
> > + /*
> > + * Patch the LVDS and DU port nodes names and the associated fixup
> > + * entries.
> > + */
> > + lvds = rcar_du_of_find_node_by_path(overlay.np,
> > + "/fragment@0/__overlay__/lvds");
> > + lvds_endpoints[0] = rcar_du_of_find_node_by_path(overlay.np,
> > + "/fragment@0/__overlay__/lvds/ports/port@0/endpoint");
> > + lvds_endpoints[1] = rcar_du_of_find_node_by_path(overlay.np,
> > + "/fragment@0/__overlay__/lvds/ports/port@1/endpoint");
> > + du_port = rcar_du_of_find_node_by_path(overlay.np,
> > + "/fragment@1/__overlay__/ports/port@0");
> > + du_port_fixup = rcar_du_of_find_node_by_path(overlay.np,
> > + "/__local_fixups__/fragment@1/__overlay__/ports/port@0");
>
> Many strings with similar prefixes or substrings?
> Would it make sense to e.g. locate "/fragment@0/__overlay__/lvds/ports"
> first, and continue from there?
I can do that for the first three, yes.
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
