On 01/10/2018 12:59 PM, Noralf Trønnes wrote:
Split out common poweron-reset functionality.
Signed-off-by: Noralf Trønnes <noralf@xxxxxxxxxxx>
---
drivers/gpu/drm/tinydrm/mi0283qt.c | 22 ++----------
drivers/gpu/drm/tinydrm/mipi-dbi.c | 73 ++++++++++++++++++++++++++++++++++++++
drivers/gpu/drm/tinydrm/st7586.c | 9 ++---
drivers/gpu/drm/tinydrm/st7735r.c | 8 ++---
include/drm/tinydrm/mipi-dbi.h | 2 ++
5 files changed, 83 insertions(+), 31 deletions(-)
diff --git a/drivers/gpu/drm/tinydrm/mi0283qt.c b/drivers/gpu/drm/tinydrm/mi0283qt.c
index c69a4d958f24..1617405faed4 100644
--- a/drivers/gpu/drm/tinydrm/mi0283qt.c
+++ b/drivers/gpu/drm/tinydrm/mi0283qt.c
@@ -49,33 +49,17 @@
static int mi0283qt_init(struct mipi_dbi *mipi)
{
- struct tinydrm_device *tdev = &mipi->tinydrm;
- struct device *dev = tdev->drm->dev;
u8 addr_mode;
int ret;
DRM_DEBUG_KMS("\n");
- ret = regulator_enable(mipi->regulator);
- if (ret) {
- DRM_DEV_ERROR(dev, "Failed to enable regulator %d\n", ret);
+ ret = mipi_dbi_poweron_conditional_reset(mipi);
+ if (ret < 0)
return ret;
- }
-
- /* Avoid flicker by skipping setup if the bootloader has done it */
It could be helpful to keep this comment.
- if (mipi_dbi_display_is_on(mipi))
+ if (ret == 1)
return 0;
- mipi_dbi_hw_reset(mipi);
- ret = mipi_dbi_command(mipi, MIPI_DCS_SOFT_RESET);
- if (ret) {
- DRM_DEV_ERROR(dev, "Error sending command %d\n", ret);
- regulator_disable(mipi->regulator);
- return ret;
- }
-
- msleep(20);
-
mipi_dbi_command(mipi, MIPI_DCS_SET_DISPLAY_OFF);
mipi_dbi_command(mipi, ILI9341_PWCTRLB, 0x00, 0x83, 0x30);
diff --git a/drivers/gpu/drm/tinydrm/mipi-dbi.c b/drivers/gpu/drm/tinydrm/mipi-dbi.c
index 1c8ef0c4d6d4..3e879d605ed3 100644
--- a/drivers/gpu/drm/tinydrm/mipi-dbi.c
+++ b/drivers/gpu/drm/tinydrm/mipi-dbi.c
@@ -463,6 +463,7 @@ bool mipi_dbi_display_is_on(struct mipi_dbi *mipi)
val &= ~DCS_POWER_MODE_RESERVED_MASK;
+ /* The poweron/reset value is 08h DCS_POWER_MODE_DISPLAY_NORMAL_MODE */
if (val != (DCS_POWER_MODE_DISPLAY |
DCS_POWER_MODE_DISPLAY_NORMAL_MODE | DCS_POWER_MODE_SLEEP_MODE))
return false;
@@ -473,6 +474,78 @@ bool mipi_dbi_display_is_on(struct mipi_dbi *mipi)
}
EXPORT_SYMBOL(mipi_dbi_display_is_on);
+static int mipi_dbi_poweron_reset_conditional(struct mipi_dbi *mipi, bool cond)
+{
+ struct device *dev = mipi->tinydrm.drm->dev;
+ int ret;
+
+ if (mipi->regulator) {
+ ret = regulator_enable(mipi->regulator);
+ if (ret) {
+ DRM_DEV_ERROR(dev, "Failed to enable regulator (%d)\n", ret);
+ return ret;
+ }
+ }
+
+ if (cond && mipi_dbi_display_is_on(mipi))
+ return 1;
+
+ mipi_dbi_hw_reset(mipi);
+ ret = mipi_dbi_command(mipi, MIPI_DCS_SOFT_RESET);
+ if (ret) {
+ DRM_DEV_ERROR(dev, "Failed to send reset command (%d)\n", ret);
+ if (mipi->regulator)
+ regulator_disable(mipi->regulator);
+ return ret;
+ }
+
+ /*
+ * If we did a hw reset, we know the controller is in Sleep mode and
+ * per MIPI DSC spec should wait 5ms after soft reset. If we didn't,
+ * we assume worst case and wait 120ms.
+ */
+ if (mipi->reset)
+ usleep_range(5000, 20000);
+ else
+ msleep(120);
+
+ return 0;
+}
+
+/**
+ * mipi_dbi_poweron_reset - MIPI DBI poweron and reset
+ * @mipi: MIPI DBI structure
+ *
+ * This function enables the regulator if used and does a hardware and software
+ * reset.
+ *
+ * Returns:
+ * Zero on success, or a negative error code.
+ */
+int mipi_dbi_poweron_reset(struct mipi_dbi *mipi)
+{
+ return mipi_dbi_poweron_reset_conditional(mipi, false);
+}
+EXPORT_SYMBOL(mipi_dbi_poweron_reset);
+
+/**
+ * mipi_dbi_poweron_conditional_reset - MIPI DBI poweron and conditional reset
+ * @mipi: MIPI DBI structure
+ *
+ * This function enables the regulator if used and if the display is off, it
+ * does a hardware and software reset. If mipi_dbi_display_is_on() determines
+ * that the display is on, no reset is performed.
+ *
+ * Returns:
+ * Zero if the controller was reset, 1 if the display was already on, or a
+ * negative error code.
+ */
+int mipi_dbi_poweron_conditional_reset(struct mipi_dbi *mipi)
+{
+ return mipi_dbi_poweron_reset_conditional(mipi, true);
+}
+EXPORT_SYMBOL(mipi_dbi_poweron_conditional_reset);
+
#if IS_ENABLED(CONFIG_SPI)
/**
diff --git a/drivers/gpu/drm/tinydrm/st7586.c b/drivers/gpu/drm/tinydrm/st7586.c
index 9fd4423c8e70..a6396ef9cc4a 100644
--- a/drivers/gpu/drm/tinydrm/st7586.c
+++ b/drivers/gpu/drm/tinydrm/st7586.c
@@ -179,19 +179,16 @@ static void st7586_pipe_enable(struct drm_simple_display_pipe *pipe,
{
struct tinydrm_device *tdev = pipe_to_tinydrm(pipe);
struct mipi_dbi *mipi = mipi_dbi_from_tinydrm(tdev);
- struct device *dev = tdev->drm->dev;
int ret;
u8 addr_mode;
DRM_DEBUG_KMS("\n");
- mipi_dbi_hw_reset(mipi);
- ret = mipi_dbi_command(mipi, ST7586_AUTO_READ_CTRL, 0x9f);
- if (ret) {
- DRM_DEV_ERROR(dev, "Error sending command %d\n", ret);
+ ret = mipi_dbi_poweron_reset(mipi);
+ if (ret)
return;
- }
+ mipi_dbi_command(mipi, ST7586_AUTO_READ_CTRL, 0x9f);
mipi_dbi_command(mipi, ST7586_OTP_RW_CTRL, 0x00);
msleep(10);
diff --git a/drivers/gpu/drm/tinydrm/st7735r.c b/drivers/gpu/drm/tinydrm/st7735r.c
index 1f38e15da676..650257ad0193 100644
--- a/drivers/gpu/drm/tinydrm/st7735r.c
+++ b/drivers/gpu/drm/tinydrm/st7735r.c
Also need:
@@ -40,7 +40,6 @@ static void jd_t18003_t01_pipe_enable(struct drm_simple_display_pipe *pipe,
{
struct tinydrm_device *tdev = pipe_to_tinydrm(pipe);
struct mipi_dbi *mipi = mipi_dbi_from_tinydrm(tdev);
- struct device *dev = tdev->drm->dev;
int ret;
u8 addr_mode;
to prevent compiler warning.
@@ -46,13 +46,9 @@ static void jd_t18003_t01_pipe_enable(struct drm_simple_display_pipe *pipe,
DRM_DEBUG_KMS("\n");
- mipi_dbi_hw_reset(mipi);
-
- ret = mipi_dbi_command(mipi, MIPI_DCS_SOFT_RESET);
- if (ret) {
- DRM_DEV_ERROR(dev, "Error sending command %d\n", ret);
+ ret = mipi_dbi_poweron_reset(mipi);
+ if (ret)
return;
- }
msleep(150);
diff --git a/include/drm/tinydrm/mipi-dbi.h b/include/drm/tinydrm/mipi-dbi.h
index 6441d9a9161a..795a4a2205bb 100644
--- a/include/drm/tinydrm/mipi-dbi.h
+++ b/include/drm/tinydrm/mipi-dbi.h
@@ -73,6 +73,8 @@ void mipi_dbi_pipe_enable(struct drm_simple_display_pipe *pipe,
void mipi_dbi_pipe_disable(struct drm_simple_display_pipe *pipe);
void mipi_dbi_hw_reset(struct mipi_dbi *mipi);
bool mipi_dbi_display_is_on(struct mipi_dbi *mipi);
+int mipi_dbi_poweron_reset(struct mipi_dbi *mipi);
+int mipi_dbi_poweron_conditional_reset(struct mipi_dbi *mipi);
u32 mipi_dbi_spi_cmd_max_speed(struct spi_device *spi, size_t len);
int mipi_dbi_command_read(struct mipi_dbi *mipi, u8 cmd, u8 *val);
With the compiler warning fixed:
Reviewed-by: David Lechner <david@xxxxxxxxxxxxxx>
Also, the whole series:
Tested-by: David Lechner <david@xxxxxxxxxxxxxx>
using st7735r which has a hardware reset and backlight, but no regulator.
And it is write-only, so cannot detect that the display is already on.
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
