Add support for the R-Car V3M (R8A77970) SoC to the DU driver (this SoC
has only 1 display port). Note that there are some differences with the
other R-Car gen3 SoCs in the LVDS encoder part, e.g. LVDPLLCR has the same
layout as on the R-Car gen2 SoCs...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/display/renesas,du.txt | 1
drivers/gpu/drm/rcar-du/rcar_du_drv.c | 23 +++++++++++++++
drivers/gpu/drm/rcar-du/rcar_du_drv.h | 1
drivers/gpu/drm/rcar-du/rcar_du_group.c | 10 +++---
drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c | 20 +++++++++----
5 files changed, 45 insertions(+), 10 deletions(-)
Index: linux/Documentation/devicetree/bindings/display/renesas,du.txt
===================================================================
--- linux.orig/Documentation/devicetree/bindings/display/renesas,du.txt
+++ linux/Documentation/devicetree/bindings/display/renesas,du.txt
@@ -13,6 +13,7 @@ Required Properties:
- "renesas,du-r8a7794" for R8A7794 (R-Car E2) compatible DU
- "renesas,du-r8a7795" for R8A7795 (R-Car H3) compatible DU
- "renesas,du-r8a7796" for R8A7796 (R-Car M3-W) compatible DU
+ - "renesas,du-r8a77970" for R8A77970 (R-Car V3M) compatible DU
- reg: A list of base address and length of each memory resource, one for
each entry in the reg-names property.
Index: linux/drivers/gpu/drm/rcar-du/rcar_du_drv.c
===================================================================
--- linux.orig/drivers/gpu/drm/rcar-du/rcar_du_drv.c
+++ linux/drivers/gpu/drm/rcar-du/rcar_du_drv.c
@@ -258,6 +258,28 @@ static const struct rcar_du_device_info
.dpll_ch = BIT(1),
};
+static const struct rcar_du_device_info rcar_du_r8a77970_info = {
+ .gen = 3,
+ .model = R8A77970,
+ .features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
+ | RCAR_DU_FEATURE_EXT_CTRL_REGS
+ | RCAR_DU_FEATURE_VSP1_SOURCE,
+ .num_crtcs = 1,
+ .routes = {
+ /* R8A77970 has one RGB output and one LVDS output. */
+ [RCAR_DU_OUTPUT_DPAD0] = {
+ .possible_crtcs = BIT(0),
+ .port = 1,
+ },
+ [RCAR_DU_OUTPUT_LVDS0] = {
+ .possible_crtcs = BIT(0),
+ .port = 0,
+ },
+ },
+ .num_lvds = 1,
+ .dpll_ch = BIT(1),
+};
+
static const struct of_device_id rcar_du_of_table[] = {
{ .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
{ .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info },
@@ -269,6 +291,7 @@ static const struct of_device_id rcar_du
{ .compatible = "renesas,du-r8a7794", .data = &rcar_du_r8a7794_info },
{ .compatible = "renesas,du-r8a7795", .data = &rcar_du_r8a7795_info },
{ .compatible = "renesas,du-r8a7796", .data = &rcar_du_r8a7796_info },
+ { .compatible = "renesas,du-r8a77970", .data = &rcar_du_r8a77970_info },
{ }
};
Index: linux/drivers/gpu/drm/rcar-du/rcar_du_drv.h
===================================================================
--- linux.orig/drivers/gpu/drm/rcar-du/rcar_du_drv.h
+++ linux/drivers/gpu/drm/rcar-du/rcar_du_drv.h
@@ -59,6 +59,7 @@ enum rcar_du_model {
R8A7794,
R8A7795,
R8A7796,
+ R8A77970,
};
/*
Index: linux/drivers/gpu/drm/rcar-du/rcar_du_group.c
===================================================================
--- linux.orig/drivers/gpu/drm/rcar-du/rcar_du_group.c
+++ linux/drivers/gpu/drm/rcar-du/rcar_du_group.c
@@ -133,10 +133,12 @@ static void rcar_du_group_setup(struct r
rcar_du_group_write(rgrp, DORCR, DORCR_PG1D_DS1 | DORCR_DPRS);
/* Apply planes to CRTCs association. */
- mutex_lock(&rgrp->lock);
- rcar_du_group_write(rgrp, DPTSR, (rgrp->dptsr_planes << 16) |
- rgrp->dptsr_planes);
- mutex_unlock(&rgrp->lock);
+ if (rcdu->info->num_crtcs > 1) {
+ mutex_lock(&rgrp->lock);
+ rcar_du_group_write(rgrp, DPTSR, (rgrp->dptsr_planes << 16) |
+ rgrp->dptsr_planes);
+ mutex_unlock(&rgrp->lock);
+ }
}
/*
Index: linux/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c
===================================================================
--- linux.orig/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c
+++ linux/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c
@@ -71,8 +71,10 @@ static int rcar_du_lvdsenc_start(struct
struct rcar_du_crtc *rcrtc)
{
u32 lvdhcr, lvdpllcr, lvdcr0 = lvds->mode << LVDCR0_LVMD_SHIFT;
+ const struct rcar_du_device_info *info = lvds->dev->info;
const struct drm_display_mode *mode = &rcrtc->crtc.mode;
- unsigned int gen = lvds->dev->info->gen;
+ unsigned int gen = info->gen;
+ enum rcar_du_model model = info->model;
unsigned int freq = mode->clock;
int ret;
@@ -104,7 +106,7 @@ static int rcar_du_lvdsenc_start(struct
rcar_lvds_write(lvds, LVDCHCR, lvdhcr);
/* PLL clock configuration */
- if (gen < 3)
+ if (gen < 3 || model == R8A77970)
lvdpllcr = rcar_lvds_gen2_lvdpllcr(freq);
else
lvdpllcr = rcar_lvds_gen3_lvdpllcr(freq);
@@ -136,6 +138,12 @@ static int rcar_du_lvdsenc_start(struct
rcar_lvds_write(lvds, LVDCR0, lvdcr0);
}
+ /* Turn on the LVDS PHY on R-Car V3M. */
+ if (model == R8A77970) {
+ lvdcr0 |= LVDCR0_LVEN;
+ rcar_lvds_write(lvds, LVDCR0, lvdcr0);
+ }
+
/* Wait for the startup delay. */
usleep_range(100, 150);
@@ -177,14 +185,14 @@ int rcar_du_lvdsenc_enable(struct rcar_d
void rcar_du_lvdsenc_atomic_check(struct rcar_du_lvdsenc *lvds,
struct drm_display_mode *mode)
{
- struct rcar_du_device *rcdu = lvds->dev;
+ const struct rcar_du_device_info *info = lvds->dev->info;
/*
* The internal LVDS encoder has a restricted clock frequency operating
- * range (30MHz to 150MHz on Gen2, 25.175MHz to 148.5MHz on Gen3). Clamp
- * the clock accordingly.
+ * range (30MHz to 150MHz on Gen2 and R-Car V3M, 25.175MHz to 148.5MHz
+ * on Gen3). Clamp the clock accordingly.
*/
- if (rcdu->info->gen < 3)
+ if (info->gen < 3 || info->model == R8A77970)
mode->clock = clamp(mode->clock, 30000, 150000);
else
mode->clock = clamp(mode->clock, 25175, 148500);
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
