This add a dt binding for ZynqMP DP subsystem.
Signed-off-by: Hyun Kwon <hyun.kwon@xxxxxxxxxx>
---
.../bindings/display/xlnx/xlnx,zynqmp-dpsub.txt | 94 ++++++++++++++++++++++
1 file changed, 94 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.txt
diff --git a/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.txt b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.txt
new file mode 100644
index 0000000..4e478ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.txt
@@ -0,0 +1,94 @@
+Xilinx ZynqMP DisplayPort subsystem
+-----------------------------------
+
+Required properties:
+
+- compatible: Must be "xlnx,zynqmp-dpsub-1.7".
+
+- reg: Physical base address and length of the registers set for the device.
+- reg-names: Must be "dp", "blend", "av_buf", and "aud" to map logical register
+ partitions.
+
+- interrupts: Interrupt number.
+- interrupts-parent: phandle for interrupt controller.
+
+- clocks: phandles for axi, audio, non-live video, and live video clocks.
+ axi clock is required. Audio clock is optional. If not present, audio will
+ be disabled. One of non-live or live video clock should be present.
+- clock-names: The identification strings are required. "aclk" for axi clock.
+ "dp_aud_clk" for audio clock. "dp_vtc_pixel_clk_in" for non-live video clock.
+ "dp_live_video_in_clk" for live video clock (clock from programmable logic).
+
+- phys: phandles for phy specifier.
+- phy-names: The identifier strings. "dp-phy" followed by index.
+
+- power-domains: phandle for the corresponding power domain
+
+- ports: crtc and encoder ports are required using DT bindings defined in
+ Documentation/devicetree/bindings/graph.txt.
+
+- vid-layer, gfx-layer: Required to represent available layers
+
+Required layer properties
+
+- dmas: phandles for DMA channels as defined in
+ Documentation/devicetree/bindings/dma/dma.txt.
+- dma-names: The identifier strings are required. "graphics0" for graphics
+ layer. "video" followed by index for video layer
+
+Optional child node
+
+- The driver populates any child device node in this node. This can be used,
+ for example, to populate the sound device from the DisplayPort subsystem
+ driver.
+
+Example:
+ zynqmp_dpsub: zynqmp_dpsub@fd4a0000 {
+ compatible = "xlnx,zynqmp-dpsub-1.7";
+ reg = <0x0 0xfd4a0000 0x0 0x1000>,
+ <0x0 0xfd4aa000 0x0 0x1000>,
+ <0x0 0xfd4ab000 0x0 0x1000>,
+ <0x0 0xfd4ac000 0x0 0x1000>;
+ reg-names = "dp", "blend", "av_buf", "aud";
+ interrupts = <0 119 4>;
+ interrupt-parent = <&gic>;
+
+ clock-names = "dp_apb_clk", "dp_aud_clk", "dp_live_video_in_clk";
+ clocks = <&dp_aclk>, <&clkc 17>, <&si570_1>;
+
+ phys = <&lane1 PHY_TYPE_DP 0 1 27000000>,
+ <&lane0 PHY_TYPE_DP 1 1 27000000>;
+ phy-names = "dp-phy0", "dp-phy1";
+
+ power-domains = <&pd_dp>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vid-layer {
+ dma-names = "vid0", "vid1", "vid2";
+ dmas = <&xlnx_dpdma 0>,
+ <&xlnx_dpdma 1>,
+ <&xlnx_dpdma 2>;
+ };
+
+ gfx-layer {
+ dma-names = "gfx0";
+ dmas = <&xlnx_dpdma 3>;
+ };
+
+ crtc_port: port@0 {
+ reg = <0>;
+ crtc: endpoint {
+ remote-endpoint = <&encoder>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ encoder: endpoint {
+ remote-endpoint = <&crtc>;
+ };
+ };
+ };
+};
+
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
