On Thu, Dec 21, 2017 at 02:46:55PM +0200, Ville Syrjälä wrote:
> On Thu, Dec 21, 2017 at 12:10:08PM +0100, Lukasz Spintzyk wrote:
> > Change-Id: I63dce004f8d3c5dc6a7c71070f1fab0707286ea5
> > Signed-off-by: Lukasz Spintzyk <lukasz.spintzyk@xxxxxxxxxxxxxxx>
> > ---
> > drivers/gpu/drm/drm_atomic.c | 10 ++++++++++
> > drivers/gpu/drm/drm_mode_config.c | 6 ++++++
> > drivers/gpu/drm/drm_plane.c | 1 +
> > include/drm/drm_mode_config.h | 5 +++++
> > include/drm/drm_plane.h | 3 +++
> > 5 files changed, 25 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
> > index b76d49218cf1..cd3b4ed7b04c 100644
> > --- a/drivers/gpu/drm/drm_atomic.c
> > +++ b/drivers/gpu/drm/drm_atomic.c
> > @@ -759,6 +759,14 @@ static int drm_atomic_plane_set_property(struct drm_plane *plane,
> > state->rotation = val;
> > } else if (property == plane->zpos_property) {
> > state->zpos = val;
> > + } else if (property == config->dirty_rects_property) {
> > + bool replaced = false;
> > + int ret = drm_atomic_replace_property_blob_from_id(dev,
> > + &state->dirty_blob,
> > + val,
> > + -1,
> > + &replaced);
> > + return ret;
> > } else if (plane->funcs->atomic_set_property) {
> > return plane->funcs->atomic_set_property(plane, state,
> > property, val);
> > @@ -818,6 +826,8 @@ drm_atomic_plane_get_property(struct drm_plane *plane,
> > *val = state->rotation;
> > } else if (property == plane->zpos_property) {
> > *val = state->zpos;
> > + } else if (property == config->dirty_rects_property) {
> > + *val = (state->dirty_blob) ? state->dirty_blob->base.id : 0;
> > } else if (plane->funcs->atomic_get_property) {
> > return plane->funcs->atomic_get_property(plane, state, property, val);
> > } else {
> > diff --git a/drivers/gpu/drm/drm_mode_config.c b/drivers/gpu/drm/drm_mode_config.c
> > index bc5c46306b3d..d5f1021c6ece 100644
> > --- a/drivers/gpu/drm/drm_mode_config.c
> > +++ b/drivers/gpu/drm/drm_mode_config.c
> > @@ -293,6 +293,12 @@ static int drm_mode_create_standard_properties(struct drm_device *dev)
> > return -ENOMEM;
> > dev->mode_config.prop_crtc_id = prop;
> >
> > + prop = drm_property_create(dev, DRM_MODE_PROP_BLOB,
> > + "DIRTY_RECTS", 0);
> > + if (!prop)
> > + return -ENOMEM;
> > + dev->mode_config.dirty_rects_property = prop;
> > +
> > prop = drm_property_create_bool(dev, DRM_MODE_PROP_ATOMIC,
> > "ACTIVE");
> > if (!prop)
> > diff --git a/drivers/gpu/drm/drm_plane.c b/drivers/gpu/drm/drm_plane.c
> > index 37a93cdffb4a..add110f025e5 100644
> > --- a/drivers/gpu/drm/drm_plane.c
> > +++ b/drivers/gpu/drm/drm_plane.c
> > @@ -258,6 +258,7 @@ int drm_universal_plane_init(struct drm_device *dev, struct drm_plane *plane,
> > drm_object_attach_property(&plane->base, config->prop_src_y, 0);
> > drm_object_attach_property(&plane->base, config->prop_src_w, 0);
> > drm_object_attach_property(&plane->base, config->prop_src_h, 0);
> > + drm_object_attach_property(&plane->base, config->dirty_rects_property, 0);
> > }
> >
> > if (config->allow_fb_modifiers)
> > diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
> > index e5f3b43014e1..65f64eb04c0c 100644
> > --- a/include/drm/drm_mode_config.h
> > +++ b/include/drm/drm_mode_config.h
> > @@ -599,6 +599,11 @@ struct drm_mode_config {
> > * &drm_crtc.
> > */
> > struct drm_property *prop_crtc_id;
> > + /**
> > + * @dirty_rects_property: Optional plane property to mark damaged
> > + * regions on the plane framebuffer.
>
> What exactly would the blob contain?
>
> The comment seems to be implying these are in fb coordiantes as
> opposed to plane crtc coordinates? Not sure which would be more
> convenient. At least if they're fb coordinates then you probably
> want some helpers to translate/rotate/scale those rects to the
> crtc coordinates. Actual use depends on the driver/hw I suppose.
Yeah I think we also should add a decoded state to the drm_plane_state,
which has the full structure and all the details.
And when we discussed this iirc we've identified a clear need for at least
some drivers to deal in crtc dirty rectangles. I think the initial core
support should include a helper which takes an atomic update for a given
crtc, and converts all the plane dirty rectangles into crtc rectangles.
Including any full-plane or full-crtc upgrades needed due to e.g.
reposition, changed gamma, changed blendign/zpos or anything else really
that would affect the entire plane respectively crtc. That would also
provide a really good model for what damage actually means.
Plus ofc we need userspace for this, preferrably as a patch to something
generic like weston or xfree86-video-modesetting. And an example kernel
implementation.
Cheers, Daniel
>
> > + */
> > + struct drm_property *dirty_rects_property;
> > /**
> > * @prop_active: Default atomic CRTC property to control the active
> > * state, which is the simplified implementation for DPMS in atomic
> > diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h
> > index 8185e3468a23..7d45b164ccce 100644
> > --- a/include/drm/drm_plane.h
> > +++ b/include/drm/drm_plane.h
> > @@ -131,6 +131,9 @@ struct drm_plane_state {
> > */
> > struct drm_crtc_commit *commit;
> >
> > + /* Optional blob property with damaged regions. */
> > + struct drm_property_blob *dirty_blob;
> > +
> > struct drm_atomic_state *state;
> > };
> >
> > --
> > 2.15.1
> >
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@xxxxxxxxxxxxxxxxxxxxx
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
> --
> Ville Syrjälä
> Intel OTC
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
