On 06/12/2017 13:02, Chris Wilson wrote:
> Quoting Neil Armstrong (2017-12-06 11:54:28)
>> The VPU init misses these configurations values.
>>
>> Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
>> ---
>> drivers/gpu/drm/meson/meson_drv.c | 9 +++++++++
>> drivers/gpu/drm/meson/meson_registers.h | 4 ++++
>> 2 files changed, 13 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c
>> index 3b804fd..f9ad0e9 100644
>> --- a/drivers/gpu/drm/meson/meson_drv.c
>> +++ b/drivers/gpu/drm/meson/meson_drv.c
>> @@ -151,6 +151,14 @@ static struct regmap_config meson_regmap_config = {
>> .max_register = 0x1000,
>> };
>>
>> +static void meson_vpu_init(struct meson_drm *priv)
>> +{
>> + writel_relaxed(0x210000, priv->io_base + _REG(VPU_RDARB_MODE_L1C1));
>> + writel_relaxed(0x10000, priv->io_base + _REG(VPU_RDARB_MODE_L1C2));
>> + writel_relaxed(0x900000, priv->io_base + _REG(VPU_RDARB_MODE_L2C1));
>> + writel_relaxed(0x20000, priv->io_base + _REG(VPU_WRARB_MODE_L2C1));
>> +}
>
>> diff --git a/drivers/gpu/drm/meson/meson_registers.h b/drivers/gpu/drm/meson/meson_registers.h
>> index 2847381..bca8714 100644
>> --- a/drivers/gpu/drm/meson/meson_registers.h
>> +++ b/drivers/gpu/drm/meson/meson_registers.h
>> @@ -1363,6 +1363,10 @@
>> #define VPU_PROT3_STAT_1 0x277a
>> #define VPU_PROT3_STAT_2 0x277b
>> #define VPU_PROT3_REQ_ONOFF 0x277c
>> +#define VPU_RDARB_MODE_L1C1 0x2790
>> +#define VPU_RDARB_MODE_L1C2 0x2799
>
> Hmm, not naturally aligned for writel. Is the register width correct,
> address correct, or this really is an unaligned iowrite?
The registers are aligned with the documentation, then are used with the _REG() macro
to align them with the bus (on top of the file).
Neil
>
>> +#define VPU_RDARB_MODE_L2C1 0x279d
>> +#define VPU_WRARB_MODE_L2C1 0x27a2
>
> Similarly,
> -Chris
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
