The Innolux P097PFG panel is 9.7" panel with 1536X2048 resolution, it reuse P079ZCA panel driver, so improve p079ZCA dt-binding to support P097PFG. Signed-off-by: Lin Huang <hl@xxxxxxxxxxxxxx> --- .../devicetree/bindings/display/panel/innolux,p079zca.txt | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt index d0f5516..8cadd8c 100644 --- a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt +++ b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt @@ -1,13 +1,18 @@ Innolux P079ZCA 7.85" 768x1024 TFT LCD panel +Innolux P097PFG 9.7" 1536x2048 TFT LCD panel Required properties: -- compatible: should be "innolux,p079zca" +- compatible: should be should be one of the following. + -"innolux,p079zca" for Innolux 7.9" P079ZCA 768*1024 panel + -"innolux,p097pfg" for Innolux 9.7" P097PFG 1536*2048 panel - reg: DSI virtual channel of the peripheral -- power-supply: phandle of the regulator that provides the supply voltage - enable-gpios: panel enable gpio Optional properties: - backlight: phandle of the backlight device attached to the panel +- power-supply: phandle of the regulator that provides the supply voltage +- avdd-supply: phandle of the regulator that provides positive voltage +- avee-supply: phandle of the regulator that provides negative voltage Example: @@ -16,6 +21,8 @@ Example: compatible = "innolux,p079zca"; reg = <0>; power-supply = <...>; + avdd-supply = <...>; + avee-supply = <...>; backlight = <&backlight>; enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; }; -- 2.7.4 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
