Regards
Shashank
On 11/16/2017 9:46 PM, Ville Syrjälä wrote:
On Thu, Nov 16, 2017 at 08:06:18PM +0530, Sharma, Shashank wrote:
Regards
Shashank
On 11/13/2017 10:34 PM, Ville Syrjala wrote:
From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
HDMI 2.0 Appendix F suggest that we should keep sending the infoframe
when switching from 3D to 2D mode, even if the infoframe isn't strictly
necessary (ie. not needed to transmit the VIC or stereo information).
This is a workaround against some sinks that fail to realize that they
should switch from 3D to 2D mode when the source stop transmitting
the infoframe.
v2: Handle unpack() as well
Pull the length calculation into a helper
Cc: Shashank Sharma <shashank.sharma@xxxxxxxxx>
Cc: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
Cc: Thierry Reding <thierry.reding@xxxxxxxxx>
Cc: Hans Verkuil <hans.verkuil@xxxxxxxxx>
Cc: linux-media@xxxxxxxxxxxxxxx
Reviewed-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
drivers/video/hdmi.c | 51 +++++++++++++++++++++++++++++++--------------------
1 file changed, 31 insertions(+), 20 deletions(-)
diff --git a/drivers/video/hdmi.c b/drivers/video/hdmi.c
index 1cf907ecded4..111a0ab6280a 100644
--- a/drivers/video/hdmi.c
+++ b/drivers/video/hdmi.c
@@ -321,6 +321,17 @@ int hdmi_vendor_infoframe_init(struct hdmi_vendor_infoframe *frame)
}
EXPORT_SYMBOL(hdmi_vendor_infoframe_init);
+static int hdmi_vendor_infoframe_length(const struct hdmi_vendor_infoframe *frame)
+{
+ /* for side by side (half) we also need to provide 3D_Ext_Data */
+ if (frame->s3d_struct >= HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF)
+ return 6;
+ else if (frame->vic != 0 || frame->s3d_struct != HDMI_3D_STRUCTURE_INVALID)
+ return 5;
+ else
+ return 4;
+}
+
/**
* hdmi_vendor_infoframe_pack() - write a HDMI vendor infoframe to binary buffer
* @frame: HDMI infoframe
@@ -341,19 +352,11 @@ ssize_t hdmi_vendor_infoframe_pack(struct hdmi_vendor_infoframe *frame,
u8 *ptr = buffer;
size_t length;
- /* empty info frame */
- if (frame->vic == 0 && frame->s3d_struct == HDMI_3D_STRUCTURE_INVALID)
- return -EINVAL;
-
/* only one of those can be supplied */
if (frame->vic != 0 && frame->s3d_struct != HDMI_3D_STRUCTURE_INVALID)
return -EINVAL;
- /* for side by side (half) we also need to provide 3D_Ext_Data */
- if (frame->s3d_struct >= HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF)
- frame->length = 6;
- else
- frame->length = 5;
+ frame->length = hdmi_vendor_infoframe_length(frame);
length = HDMI_INFOFRAME_HEADER_SIZE + frame->length;
@@ -372,14 +375,16 @@ ssize_t hdmi_vendor_infoframe_pack(struct hdmi_vendor_infoframe *frame,
ptr[5] = 0x0c;
ptr[6] = 0x00;
- if (frame->vic) {
- ptr[7] = 0x1 << 5; /* video format */
- ptr[8] = frame->vic;
- } else {
+ if (frame->s3d_struct != HDMI_3D_STRUCTURE_INVALID) {
ptr[7] = 0x2 << 5; /* video format */
ptr[8] = (frame->s3d_struct & 0xf) << 4;
if (frame->s3d_struct >= HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF)
ptr[9] = (frame->s3d_ext_data & 0xf) << 4;
+ } else if (frame->vic) {
Please correct me if I dint understand this properly, but for a HDMI 2.0
sink + 3D transmission, wouldn't I be sending
HDMI 2.0 VIC = 94 as well as some valid s3d flag (like side by side) ?
That vic will be in the AVI infoframe. Here we're concerned about the
VIC in the HDMI vendor infoframe.
Yep, I was thinking if there is any way we can cross check that there is
a valid HDMI 2 vic
before we do anything here, but seems like a long shot.
Reviewed-by: Shashank Sharma <shashank.sharma@xxxxxxxxx>
- Shashank
+ ptr[7] = 0x1 << 5; /* video format */
+ ptr[8] = frame->vic;
+ } else {
+ ptr[7] = 0x0 << 5; /* video format */
}
hdmi_infoframe_set_checksum(buffer, length);
@@ -1165,7 +1170,7 @@ hdmi_vendor_any_infoframe_unpack(union hdmi_vendor_any_infoframe *frame,
if (ptr[0] != HDMI_INFOFRAME_TYPE_VENDOR ||
ptr[1] != 1 ||
- (ptr[2] != 5 && ptr[2] != 6))
+ (ptr[2] != 4 && ptr[2] != 5 && ptr[2] != 6))
return -EINVAL;
length = ptr[2];
@@ -1193,16 +1198,22 @@ hdmi_vendor_any_infoframe_unpack(union hdmi_vendor_any_infoframe *frame,
hvf->length = length;
- if (hdmi_video_format == 0x1) {
- hvf->vic = ptr[4];
- } else if (hdmi_video_format == 0x2) {
+ if (hdmi_video_format == 0x2) {
+ if (length != 5 && length != 6)
+ return -EINVAL;
hvf->s3d_struct = ptr[4] >> 4;
if (hvf->s3d_struct >= HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF) {
- if (length == 6)
- hvf->s3d_ext_data = ptr[5] >> 4;
- else
+ if (length != 6)
return -EINVAL;
+ hvf->s3d_ext_data = ptr[5] >> 4;
}
+ } else if (hdmi_video_format == 0x1) {
+ if (length != 5)
+ return -EINVAL;
+ hvf->vic = ptr[4];
+ } else {
+ if (length != 4)
+ return -EINVAL;
}
return 0;
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
