Hi,
Changes since v1:
- Use the crtc->mode_valid and not connector->mode_valid as the limit is really
posed by the 'crtc' (DISPC)
- Bandwidth calculation changed: do the calculation in place + extended comment
- looked for better place to document the max-memory-bandwidth, but
can not find any suitable document. Creating a new txt file for only one
property did not seemed feasable.
This series will add simple memory bandwidth limit support to reject modes
which, if used with one plane in full size would fail the limit.
Regards,
Peter
---
Peter Ujfalusi (3):
dt-bindings: display/ti: Add optional property to set memory bandwidth
limit
drm/omap: dss: Add support for reporting memory bandwidth limitation
drm/omap: Filter displays mode based on bandwidth limit
.../devicetree/bindings/display/ti/ti,dra7-dss.txt | 5 +++
.../bindings/display/ti/ti,omap2-dss.txt | 4 +++
.../bindings/display/ti/ti,omap3-dss.txt | 4 +++
.../bindings/display/ti/ti,omap4-dss.txt | 4 +++
.../bindings/display/ti/ti,omap5-dss.txt | 4 +++
drivers/gpu/drm/omapdrm/dss/dispc.c | 13 ++++++++
drivers/gpu/drm/omapdrm/dss/omapdss.h | 2 ++
drivers/gpu/drm/omapdrm/omap_crtc.c | 37 ++++++++++++++++++++++
drivers/gpu/drm/omapdrm/omap_drv.c | 5 +++
drivers/gpu/drm/omapdrm/omap_drv.h | 3 ++
10 files changed, 81 insertions(+)
--
Peter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
